SUNLU PLA Plus 3D Printer Filament 4KG, PLA+ Filament 1.75mm, Strong Neatly Wound 3D Printing Filament 1.75mm+/-0.02mm, Fit Most FDM 3D Printers, 1KG per Spool, 4 Packs,(4*Black)

【100% Neatly Wound & Tangle-Free】SUNLU 3D PLA+ filament uses advanced winding technology for 100% neatly arranged lines. This reduces tangles and breakage, ensuring smoother, more efficient printing.

【Tough & Impact-Resistant】SUNLU PLA+ filament is 10x stronger than standard PLA, delivering exceptional toughness, strength, and reduced brittleness. Ideal for durable, high-strength 3D prints.

【Smooth & Easy to Use】Precise deposition and strong layer bonding ensure a smoother surface finish, preventing layer separation. Lower printing temperature makes printing easier while ensuring good print quality.

【Dimensional Accuracy +/- 0.02mm】Accurate Manufacturing Process ensures SUNLU PLA Plus filament of 1.75mm diameter, accuracy of +/- 0.02mm. Strict tolerances and perfect dimensions ensure smooth, consistent feeding and optimal flow.

【High Compatibility】SUNLU filament's precise diameter makes it compatible with nearly all 1.75mm FDM 3D printers, including Bambu Lab P1P / X1 / X1C, AnkerMake M5, Voron 2.4, Creality Ender 3 and more.

【No Clogging & No Bubbles】SUNLU 3D Printer filaments are securely vacuum-sealed and fully dried before packing to protect the filament from moisture and dust, ensuring no clogging or bubbling during printing.

【Recommended Settings】For optimal results, print at a nozzle/extrusion temperature of 210°C - 235°C (410°F - 455°F) and a bed/platform temperature of 55°C - 65°C (131°F - 149°F).

<p><b>FAQ:&nbsp;</b></p> <p><b>● Why can't the filaments stick to the build bed easily?</b></p> <p><b>● Please do 3 steps checking！</b></p> <p>① Temperature</p> <p>Please check the temperature(bed and nozzle) settings before printing and set it suitable.</p> <p>② Building Bed</p> <p>Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed.</p> <p>③ Speed</p> <p>Please check if the printing speed of the first layer is too fast(Recommended: 20-40mm/s).</p> <p>&nbsp;</p> <p><b>Recommended Settings:</b></p> <p>● Nozzle 210°C - 235°C (410°F - 455°F)</p> <p>● Bed 70°C - 80°C (158°F - 176°F)</p> <p>● Printing Speed: 40-80(mm/s)</p> <p>● These settings are for 0.4mm nozzle, it may be different with different diameters nozzle</p> <p><br></p> <p></p> <p><b>Notes</b></p> <p>● Please insert the filament into the side holes after use to avoid tangles.</p> <p>● Feel free to message us if you have any questions about the filament.</p> <p>● Please stored the 3D printer filament in a sealed bag or box after using it.</p>