ONLTCO Pintle Hook Pintle Hitches Receiver Hook 10 TON Combination Hitch Ball 2-5/16” Fits Hitch Hook Military Receiver 12000 lbs

⭐CAPACITY: Towing weight for the Pintle Hook is 20,000 pounds 10 Ton hitch, for the 2-5/16 inch ball that gonna be rated at 12,000 pounds; It will fit hitch towing ring with a diameter of 2-1/2 inches;

⭐MATERIAL: Made from a very strong and durable forged steel construction; It’s going to feature a rust resistant finishes, have a high abrasion resistance black finish on the actual Pintle Hook; The hitch ball is s steel construction with the chrome plating which is going to do a great job at resisting rust and corrosion lasting a long time;

⭐MEASUREMENT: The ball’s diameters is 2-5/16 inch; The mount holes on the back the whole separation a part on center go in horizontal direction is 3-7/20 inch, Portrait direction is 1-3/4 inch; Those diameters of the mount holes swimming 1/2 inch; Hitch eye size;

⭐HANDY: Pin and clip at the top, that is tethered so that way you don’t have to worry about misplacing that or losing it;

⭐EASY TO USE: The Pintle Hook can be used with a receiver ring or ball coupler; Installation hardware is included, come with bolt split lock washer and nut.

This pintle hook connects to the receiver ring and the hitch ball connects to a ball coupler. If connecting to a standard coupler or towing Ring , removing the pin and clip,lift up on the T-handle ,it’s going to allow you to bring back that upper arm and then that opens the unit . So at this point you can make your connection again whether you are doing a towing Ring connection or a standard coupler connection. This Pintle hitch’s hitch ball can be removed and a different one can be installed so you can swap this one for a 1-7/8 inch ball or 2 inch ball ,( these ball are not include.)