Liquid Rubber Rock Glue for Landscaping - Pea Gravel Stabilizer, 5 Gallon — Open-Box, 5% Off

PROFESSIONAL GRADE ROCK STABILIZER: Many rock glues fail because they are underformulated or improperly applied. Liquid Rubber Rock Glue is engineered for real landscaping projects, locking pea gravel, stone, mulch and bark in place while remaining flexible and permeable for proper drainage.

READY TO USE NO DILUTION GUESSWORK: No mixing. No ratios. No confusion. Simply stir and apply using a garden sprayer or watering can. Designed as a two coat system with consistent coverage of approximately 1 gallon per 50 sq ft total for both coats combined.

STRONG HOLD WITHOUT SEALING THE SURFACE: Unlike rigid binders that trap water, our water based formula stabilizes the surface while allowing water to pass through. Helps minimize erosion, reduce dust and keep your landscaping neat season after season.

BUILT FOR REAL WORLD CONDITIONS: Designed for pea gravel up to 3/8 inch and angular stone up to 3/4 inch. Performs best when applied to clean, completely dry material at proper temperatures. When applied as directed, typical performance lasts 12 to 24 months depending on environment and conditions.

SAFE WATER BASED FORMULA: Low odor, water based and non toxic when cured. Will not harm grass, plants or pets when used as directed. Easy warm water cleanup while wet.

COVERAGE YOU CAN PLAN FOR: Coverage is based on total material used across two coats, not per coat. A typical 50 sq ft area requires 1 gallon total. Larger projects can use our 5 gallon pail covering approximately 250 sq ft.

OVER 20 YEARS OF COATING EXPERIENCE: Liquid Rubber has been manufacturing professional grade protective coatings for over two decades. We are not a nameless brand. You can reach our product and application support team anytime for help with your project.

Secure Your Stone. Protect Your Landscape. Liquid Rubber Rock Glue is a professional-grade landscaping stabilizer designed to keep pea gravel and decorative stone looking clean, contained and well maintained. Loose rock spreads into lawns, clogs edges, collects dust and shifts after rain or wind. Our ready-to-use, water-based formula penetrates the top layer of material and forms a flexible bond that stabilizes the surface while remaining permeable for proper drainage. This is not a watered-down concentrate and there is no dilution guesswork. Simply stir and apply using a garden sprayer or watering can for even distribution. When applied at the recommended coverage rate, one gallon provides approximately 50 square feet of total coverage across the full application. Proper surface preparation is essential. Apply only to clean, completely dry material with a minimum two-inch depth of stone or pea gravel. Avoid application before rain or freezing temperatures and allow appropriate drying time between coats. When applied as directed, Liquid Rubber Rock Glue typically provides 12 to 24 months of surface stabilization depending on environmental exposure and conditions. Reapplication may be required seasonally in high-exposure areas. Ideal for decorative landscaping beds, around stepping stones, stone borders and erosion-prone areas, this clear-drying formula helps maintain the natural appearance of your landscape without sealing the surface. Backed by over 20 years of professional coating manufacturing experience, Liquid Rubber products are trusted across residential and commercial projects. If you have questions about your application, our product and application support team is ready to help. Landscaping done properly.