Autoverve 954-05001 754-05001 24 30 Inch Deck Belt Fit Troy Bilt TB30R TB30 TB30B TB30T Craftsman R110 R1000 R105 R140 R1500 Cub Cadet CC30 CC30H Columbia CR30 CR30H Murray Yard Machines CMXGZAM501065 — Open-Box, 30% Off

【Recommended Replacement】: A worn deck belt can contribute to slipping, squealing, reduced blade speed or uneven cutting. Replace your belt when you notice cracks, frayed edges, glazing, exposed cords or visible damage. This 954-05001 replacement is intended for selected compact riding mower decks using the matching original belt number. Correct fit, routing and tension help restore dependable blade-drive operation. Inspect the belt together with the pulleys and tension system, since worn components can cause similar symptoms or damage a replacement belt. 【Quality & Blade-Drive Performance】: Designed for the deck-drive function on compatible compact riding mowers, this replacement belt transfers power through the cutting-deck pulley system to operate the blade. Proper belt selection, alignment and tension support steady power transfer during mowing. Its application-specific fit helps maintain the intended routing when matched to the correct equipment configuration. Keep pulley grooves, bearings and guides in serviceable condition to reduce avoidable slipping and edge wear. Correct installation and routine inspection help support reliable mowing performance. 【Compatibility & Specifications】: Replaces 954-05001, 754-05001, CMXGZAM501065, 490-501-C065, 490-501-M065, 490-501-F065, 490-501-U065 and 490-501-Y065. Specified size: 1/2-inch top width x 43.5-inch length. Intended for selected 24- and 30-inch riding mower deck applications requiring these references. This is a deck/blade-drive belt, NOT an upper, lower, transmission, traction or hydrostatic drive belt. Confirm the original belt number and exact equipment model; cutting width or an approximate old-belt measurement alone does not establish compatibility. 【Troy-Bilt Compatibility】: Fits selected TB30R, TB30, TB30B and TB30T applications using 954-05001 / 754-05001. Listed configurations include TB30R models 13CC26JD011, 13B726JD066 and 13AC21JD011; TB30 models 13A726JD066 and 13B226JD066; TB30B models 13BC26JD023, 13AC26JDA23, 13AC26JD066 and 13AC26JD023; and TB30T model 13A726JDA66. See the description for the complete model matrix. Verify the full 11-character equipment model and original deck-belt reference rather than ordering by the TB30-series name alone. 【Craftsman Compatibility】: Fits selected R110, R105, R140, R1000 and R1500 rear-engine riding mower configurations requiring 954-05001 / 754-05001. Product references include R110 CMXGRAM1130035 and CMXGRAM1222292; R105 CMXGRAM211303 and CMXGRAM7368327; R140 CMXGRAM1130040; R1000 247.290000, 247.290003, 247.203695, 247.203690 and 247.203963; and R1500 247.299000 and 247.269000. Match the corresponding equipment model in the description. Similar names such as R110 and T110 do not identify the same mower or belt application. 【Cub Cadet & Additional Fitment】: Fits selected Cub Cadet CC30 Mini Rider and CC30 H Hydro Mini Rider applications; Columbia CR30 and CR30H; and the listed Yard Machines and Murray mini-rider configurations using 954-05001 / 754-05001. Complete equipment numbers are provided in the description. The Hydro designation does not make this a hydrostatic drive belt; this product drives the cutting deck. Before installation, inspect spindle and idler bearings, pulley grooves, tension components and belt guides, then follow the routing diagram for your exact mower. 【Hassle-Free Support】: We provide lifetime product support and respond to messages within 24 hours. Contact us through Amazon for help with compatibility, routing, installation, slipping, noise or premature wear. Please include your order number, complete mower model, deck size, original belt number and clear photos of the belt and pulley route when available. If the belt arrives damaged or does not fit as expected, contact us so we can review the issue and work toward an appropriate solution. We support you from pre-purchase fitment checks through post-installation troubleshooting. Compatible With

Replacement deck belt for selected Troy-Bilt, Craftsman, Cub Cadet, Yard Machines, Murray and Columbia compact riding mower applications requiring 954-05001 or 754-05001.

This belt reference covers selected 24- and 30-inch cutting-deck applications. Deck size alone does not establish compatibility. Confirm the original belt number, complete equipment model and installed deck before purchase.

Product Specifications

Specified Length: 43.5 in. / 1104.9 mm
Top Width: 0.5 in. / 1/2 in. / 12.7 mm
Application: Mower Deck Blade Drive
Equipment Type: Selected Compact Riding Mowers / Mini Riders

Replacement Reference Numbers

954-05001
754-05001
CMXGZAM501065
490-501-C065
490-501-M065
490-501-F065
490-501-U065
490-501-Y065

IMPORTANT: Deck Belt, Not Transmission Belt

This belt transfers power through the cutting-deck drive system to operate the mower blade. It is NOT an upper transmission, lower transmission, traction, ground-drive or hydrostatic drive belt.

A compact rider may use separate belts for cutting and movement. If the engine runs but the mower will not move correctly, identify the affected drive system before ordering a deck belt.

Troy-Bilt Fitment Matrix

The following listed configurations must specify 954-05001 / 754-05001 in the applicable deck parts diagram.

TB30R
13CC26JD011
13B726JD223
13B726JD066
13B726JD023
13AC21JD011
13A726JD223
13A726JD066
13A726JD023
13A721JD066
13B226JD066
13BC26JD211
13BC26JD066
13BC26JD011
13CC26JD211

TB30T
13A726JDA66

TB30
13A726JD066
13B226JD066

TB30B
13BC26JD023
13AC26JDA23
13AC26JD066
13AC26JD023

Troy-Bilt model names may cover different production configurations and drive systems. Match the complete equipment model and original deck-belt number rather than relying on the TB30-series name alone.

Craftsman Fitment Matrix

R110 — CMXGRAM1130035
13AC26JD093
13AC26JDA93
13BC26JD093

R110 — CMXGRAM1222292
13AC26JD293
13BC26JD293

R105
CMXGRAM211303 / 13B726JD091
CMXGRAM7368327 / 13A726JD091

R140 — CMXGRAM1130040
13BC21JD093
13AC21JD093

R1000
247.290000 / 13B226JD099 — listed 2014-2015 application
247.290003 / 13B226JD099
247.203695 / 13B226JD299
247.203690 / 13B226JD299
247.203963 / 13B226JD299

R1500
247.299000 / 13A726JD099
247.269000 / 13A726JD299

Important Craftsman Notice

Check the complete Craftsman identification beginning with CMXGRAM or 247, together with the corresponding equipment model where available. Similar model names do not establish compatibility. R110 and T110, for example, are not interchangeable model designations.

The year range shown for 247.290000 applies only to that listed application. Do not apply it to every R1000 model or use it as the sole fitment criterion.

Cub Cadet Fitment Matrix

CC30 Mini Rider
13A726JD056
13A726JD010
13A226JD056
13A226JD010

CC30 H / CC 30 H Hydro Mini Rider
13B221JD010
13A221JD010
13A221JD210
13C721JD010
13AC21JDA10
13AC21JD010
13B721JD056
13B721JD010
13A721JD056
13A721JD010

Important CC30 H Notice

The Hydro designation describes the mower's transmission configuration. This product remains the cutting-deck belt and does not replace the hydrostatic transmission belt. Verify the required belt position in the equipment diagram before purchase.

Yard Machines Fitment Matrix

13A726JD029
13AC26JD000
13A326JC700

Murray Fitment Matrix

13CC26JD058
13DC26JD058
13BC26JD058
13B326JC758
13AC26JD058

Murray Mini-Rider
13A326JC058

For Yard Machines and Murray applications, confirm the exact installed deck and original belt reference. Do not assume every listed mini-rider has the same cutting width merely because the same belt reference is used.

Columbia Fitment Matrix

CR30
13A726JD897
13A226JD897
13AC26JD897

CR30H
13A721JD897

For older or regional equipment, verify the original belt number in the parts diagram for the exact mower and installed deck.

Important Fitment Notes

Before ordering, please verify that:

1. You need the mower deck/blade-drive belt.
2. The original belt or parts diagram specifies 954-05001, 754-05001 or a listed replacement reference.
3. The complete equipment model matches the applicable configuration.
4. The installed deck is the correct assembly for that belt reference.
5. Any stated year or production limitation is satisfied.

A mower brand, series name or cutting width alone cannot guarantee fitment. If the cutting deck has been replaced or modified, identify the installed assembly rather than relying only on the mower's model label.

Do Not Buy by Deck Size Alone

The 954-05001 reference is used for selected 24- and 30-inch deck applications. This does not mean that it fits every mower with either cutting width.

Confirm the original belt number and equipment configuration. Do not substitute this belt for another model simply because both machines have a 30-inch cutting deck.

Size Verification

The specified replacement size is 43.5 inches long and 1/2 inch wide. A used belt may stretch, lose material or become distorted, making an old-belt measurement unreliable.

Belt suppliers may also use different length-measurement methods. Compare the original reference and equipment parts diagram rather than choosing a replacement solely by approximate circumference.

Not Automatically Compatible With

Every Troy-Bilt TB30-series mower
Every Craftsman rear-engine rider
Every Cub Cadet CC30-series configuration
Every Yard Machines, Murray or Columbia mini-rider
Every 24- or 30-inch cutting deck
Models requiring a different original deck-belt number
Upper or lower transmission-belt applications
Traction, ground-drive or hydrostatic drive-belt applications

If your original belt number differs or your exact model is not listed, contact us for assistance before ordering.

Recommended Replacement

Inspect the belt when you notice slipping, squealing, reduced blade speed or inconsistent cutting. Replace belts with cracks, frayed edges, glazing, exposed cords or other visible deterioration.

These symptoms may also involve pulley, spindle, engagement or tension-system problems. Checking the complete deck drive helps identify the cause and reduce repeat damage after replacement.

Installation Notes

Follow the shutdown, power-isolation and service-safety instructions in your mower's operator manual. Disengage the blade drive, set the parking brake, stop the engine, remove the key and wait for all moving parts to stop. Allow hot components to cool before servicing.

Photograph the original routing before removing the old belt. Compare the replacement installation with the routing diagram for your exact mower and deck.

Inspect the following components:

Deck spindle pulley and bearing
Idler pulleys and bearings, where fitted
Tension arm and spring
Blade-engagement mechanism, as applicable
Belt guides and keepers
Pulley grooves and alignment
Complete belt routing and surrounding clearance

A seized bearing, damaged pulley groove, bent guide, weak tension component or incorrect routing can cause slipping, overheating, edge wear or premature failure. Correct identified problems before operating the mower.

Seat the belt correctly in the pulleys and position it on the proper side of every guide and keeper. Do not twist the belt, force it over pulleys with sharp tools or apply oil, grease or belt dressing.

If the belt seems excessively tight or loose, stop and recheck the original part number, routing and tension system rather than forcing the installation.

Reinstall all guards before operation. Follow the mower manual's specified blade-engagement procedure and engine speed. Stop immediately if you notice smoke, abnormal noise, excessive vibration or belt-tracking problems.

Why Should You Choose Us?

Application-Focused Deck Drive Replacement

Designed for the listed 954-05001 / 754-05001 deck-drive applications, this replacement connects the compatible pulley system to the cutting blade. Correct selection helps maintain the intended belt path and engagement.

Dependable Blade-Drive Operation

Proper fit, alignment and tension support steady power transfer during mowing. Keeping pulleys, bearings and guides in serviceable condition helps reduce avoidable slipping and premature belt damage.

Detailed Compatibility Information

The brand-by-brand model matrix helps you compare the full equipment identification before purchase. Clear separation between cutting-deck and transmission applications helps prevent ordering a belt for the wrong system.

After-Sales Support

We provide lifetime product support and respond to messages within 24 hours. Contact us through Amazon for help with fitment, routing, installation, slipping, abnormal noise or premature wear.

For faster assistance, provide your order number, complete mower model, cutting-deck size, original belt number and clear photos of the equipment label, old belt and pulley-routing system when available.

If the belt arrives damaged, does not fit as expected or develops a problem during use, contact us so we can review the issue and work toward an appropriate solution. If you cannot locate every equipment detail, send what you have and we will help with the next steps.

All brand names, model numbers and part numbers are used for compatibility identification only. This is an aftermarket replacement product.