Add to favorites
Autoverve 954-04044A 754-04044 Cub Cadet 50 Inch Deck Belt Fits RZT50 KH KW VT RZT22 Z-Force S48 Troy Bilt Mustang XP RZT 50 Craftsman ZTL7000 White Outdoor Yard-Man Columbia Zero Turn MTD 754-04044A — Open-Box, 6% Off
Brand: Autoverve
Condition: Used
$2443
$2599
-6% Save $156
Updated: 11 hours 21 mins ago
Description
【Recommended Replacement】 A worn 954-04044A mower deck belt can cause blade slipping, uneven cutting, squealing, vibration, reduced blade speed, repeated belt jumping, or sudden belt failure. Replace the belt when you notice cracks, frayed edges, glazing, exposed cords, stretching, or heat damage. Designed for selected MTD-built zero-turn cutting decks, this 1/2" x 134" replacement belt helps restore stable PTO-to-deck power transfer and consistent blade speed. Verify the original OE number, exact mower model, and deck configuration before purchase.
【Quality Manufacturing】 Built for demanding mower-deck engagement, this 954-04044A replacement belt uses reinforced tensile construction with a durable wrapped surface to help resist stretching, abrasion, pulley friction, heat, dust, grass debris, and repeated flexing around deck and spindle pulleys. Correct fit, routing, and tension help support smooth PTO engagement and dependable cutting performance. Inspect spindle pulleys, idlers, bearings, belt guides, tension components, and deck alignment before installation to help prevent premature wear or repeated belt loss.
【Replacement Parts & Specifications】 Replaces Cub Cadet / Troy-Bilt / MTD 954-04044A, 754-04044A, 954-04044, 754-04044, OCC-754-04044, 490-501-M018 and 490-501-F018. Official specification: 134-inch length x 0.50-inch top width. Application: mower deck / PTO spindle belt, primarily for selected 50-inch RZT decks. This is NOT the transmission/ground-drive belt. On many RZT platforms, the transmission belt is a separate part such as 954-04043A/B. Match OE, model number, deck system, dimensions, and routing before ordering.
【Cub Cadet Compatibility】 Fits selected Cub Cadet RZT50 / RZT 50, RZT-50 KH, RZT-50 KW, RZT-50 VT and RZT22 / RZT-22 zero-turn applications using 954-04044A. Fits the exact 17WI/17WF/17RI/17BA/17AI/17AF/17AA/17YF/17YI/17BK/17WK/17VK model numbers listed in the compatibility chart. Also fits Cub Cadet Z-Force S48 LP 17AP5BHB710 and Z-Force S48 KH 53AH5FJB050. The 48-inch Z-Force models are an official fitment exception even though this belt is sold as a 50-inch deck belt.
【Troy-Bilt, MTD & Craftsman Compatibility】 Fits selected Troy-Bilt Mustang XP 50, Mustang RZT 50, Mustang 50 and RZT 50 applications including 17WF2ACP211/066/011, 17BF2ACP211/066/011, 17AF2ACP766/711/211/066/011 and 17AA5ABP766. Fits MTD RZT50 17AD2ACP004 and 17AF2ACP004. Fits Craftsman ZTL7000 247.250020 / 17AK2ACP099. Search data shows RZT50 is the strongest model-family keyword for this belt; confirm the complete mower model before ordering.
【White Outdoor, Yard-Man & Columbia Compatibility】 Fits selected White Outdoor ZT-50, ZT-22 and ZT-5000 applications including 17AK2ACP290, 17AK2ACP090, 17BK2ACP090, 17AA557P790, 17BA5A7P790, 17AA5A7P790, 17AD2ACP790, 17AK2ACP099 and 17AF2ACP897. Fits Yard-Man RZT-50 17AF2ACP004, 17AF2ACP001 and 17AD2ACP004. Fits Columbia ZT-50 / RZT-50 17AF2ACP897, 17BK2ACP597, 17AK2ACP597 and 17AK2ACP897. Verify exact model number and deck routing.
【Important Fitment Notice & Lifetime Support】 Do not buy by deck width or mower family name alone. Most applications are 50-inch RZT decks, but Cub Cadet officially lists certain 48-inch Z-Force S48 models for this same belt. Conversely, newer RZT/Ultima 50-inch mowers can use completely different belt numbers such as 954-05078 or other 50-inch deck belts. Verify 954-04044A / 754-04044A, the 1/2" x 134" size, exact model number, deck configuration, and routing. Backed by our lifetime warranty and responsive Amazon support within 24 hours.
Compatible With
Replacement mower deck / PTO spindle belt for selected Cub Cadet, Troy-Bilt, MTD, Craftsman, Yard-Man, White Outdoor and Columbia zero-turn mowers using 954-04044A or a verified interchange number.
Product Specifications
Belt Length: 134.00" / approximately 3404 mm
Top Width: 0.50" / 1/2"
Application: Mower Deck / PTO Spindle Drive
Primary OE: 954-04044A
Cross References: 754-04044A, 954-04044, 754-04044, OCC-754-04044, 490-501-M018, 490-501-F018
IMPORTANT: This is the mower-deck / PTO spindle belt. It is NOT the zero-turn transmission / ground-drive belt. Many compatible RZT platforms use a separate transmission belt such as 954-04043A or its superseding part while using 954-04044A for the cutting deck.
Cub Cadet 50-Inch RZT Fitment
RZT 50: 17WI2ACP010; 17WF2ACP010; 17WF2ACP009; 17RI2ACP256; 17RI2ACP056; 17BA5A7P712; 17BA5A7P710; 17BA5A7P709; 17AI2ACP756; 17AI2ACP710; 17AI2ACP709; 17AI2ACP256; 17AI2ACP056; 17AI2ACP010; 17AI2ACP009; 17AF2ACP010; 17AA5D7P756; 17AA5D7P710; 17AA5D7P709; 17AA5B7P756; 17AA5B7P710
RZT-50 KH: 17YF2ACP010; 17YF2ACP009
RZT-50 KW: 17YI2ACP010; 17AI2ACP056; 17YI2ACP056
RZT-50 VT: 17BK2ACP009; 17WK2ACP010; 17WK2ACP009; 17BK2ACP010; 17VK2ACP009; 17VK2ACP010
RZT-22: 17AA5A7P712; 17AA5A7P710
Cub Cadet 48-Inch Official Exception
Z-Force S48 LP: 17AP5BHB710
Z-Force S48 KH: 53AH5FJB050
Although 954-04044A is sold by Cub Cadet / Troy-Bilt as a 50-inch deck belt, current OEM fitment information also lists these specific Z-Force S48 applications. Do not remove these models only because their cutting deck is 48 inches. Exact model-number fitment takes priority over the nominal belt-family label.
Troy-Bilt Fitment
Mustang XP 50: 17WF2ACP211; 17WF2ACP066; 17WF2ACP011; 17BF2ACP211; 17BF2ACP066; 17BF2ACP011
Mustang RZT 50: 17AF2ACP766; 17AF2ACP711; 17AF2ACP211; 17AF2ACP011
Mustang 50: 17AF2ACP066
RZT 50: 17AA5ABP766
MTD Fitment
RZT50: 17AD2ACP004; 17AF2ACP004
Craftsman Fitment
ZTL7000: 247.250020 / 17AK2ACP099
Yard-Man Fitment
RZT-50: 17AF2ACP004; 17AF2ACP001; 17AD2ACP004
White Outdoor Fitment
ZT-50: 17AK2ACP290; 17AK2ACP090; 17BK2ACP090; 17AA557P790; 17BA5A7P790
ZT-22: 17AA5A7P790
ZT-5000: 17AD2ACP790
Additional Models: 17AK2ACP099; 17AF2ACP897
Columbia Fitment
ZT-50: 17AF2ACP897
RZT-50: 17BK2ACP597; 17AK2ACP597; 17AF2ACP897; 17AK2ACP897
Important Fitment Notes
Most 954-04044A applications are older residential RZT zero-turn mowers with 50-inch decks, especially Cub Cadet RZT50 and Troy-Bilt Mustang platforms. However, specific Cub Cadet Z-Force S48 models are also officially listed for this belt. Deck width alone is therefore not sufficient to confirm or reject fitment.
Do Not Assume Every 50-Inch Cub Cadet Uses 954-04044A
Newer Cub Cadet RZT / Ultima / ZT-series mowers can use other 50-inch deck-belt part numbers such as 954-05078, 954-04077A, 954-04240, 954-05008 or other model-specific belts. A search phrase containing “Cub Cadet 50 inch deck belt” is relevant traffic, but the exact model number and original OE number must still be verified before purchase.
Do Not Confuse Deck Belt and Transmission Belt
Search phrases such as “Cub Cadet RZT 50 drive belt” can be ambiguous. On models such as Craftsman ZTL7000 / MTD-built RZT platforms, the transmission belt is a separate part while 954-04044A is the PTO/deck spindle belt. If the mower will not move but the blades operate normally, verify the transmission belt instead of ordering this deck belt.
Size Verification
Official specification: 0.50-inch top width x 134.00-inch length.
A used mower-deck belt may stretch, glaze or distort, so an old-belt measurement can differ slightly from the new-belt specification. Verify the original OE number, exact model number, deck system and routing together with the dimensions.
Recommended Replacement
Replace the deck belt when you notice blade slipping, uneven cutting, squealing, vibration, reduced blade speed, repeated belt jumping, cracks, frayed edges, glazing, exposed cords or obvious stretching. Replacing a severely worn belt before complete failure can help restore stable PTO engagement and more consistent cutting performance.
Quality Manufacturing
Built for demanding mower-deck engagement, this replacement belt uses reinforced tensile construction with a durable wrapped surface to help resist stretching, abrasion, pulley friction, heat, dust, grass clippings and repeated flexing. Correct fit, routing and tension help support smooth blade engagement and dependable deck performance.
Installation Inspection
Before removing the old belt, photograph the complete deck-belt routing and compare it with the mower parts diagram or routing decal. Inspect spindle pulleys, idler pulleys, pulley bearings, tension arm, spring, belt guides/keepers, PTO components, spindle bearings and pulley alignment.
A seized bearing, bent keeper, weak spring, damaged pulley groove, misalignment or incorrect routing can cause a new belt to slip, squeal, overheat, fray, jump off or fail prematurely. Make sure the belt is fully seated in every pulley groove and properly positioned inside all guides. Do not apply oil, grease, silicone spray or belt dressing.
Why Should You Choose Us?
Built for Consistent Blade Drive
A correctly matched 954-04044A replacement belt helps transfer PTO power through the mower deck for steadier blade speed and more consistent cutting performance.
Fitment-Focused Listing
This listing uses exact model-number fitment and clearly preserves the official Z-Force S48 exception while separating RZT50 deck-belt searches from transmission-belt searches. This helps reduce wrong-belt purchases caused by selecting only from deck width or mower-family names.
After-Sales Support
Your purchase is backed by our lifetime warranty and responsive after-sales support. If you have questions about 954-04044A fitment, deck routing, installation, squealing, slipping, belt jumping or premature wear, please contact us through Amazon.
For faster assistance, provide the mower brand, exact model number, original belt number and clear photos of the old belt and pulley route. Our support team will respond within 24 hours and help with troubleshooting, replacement or warranty support.
All brand names, mower model numbers and part numbers are used for compatibility identification only. This is an aftermarket replacement product.
Replacement mower deck / PTO spindle belt for selected Cub Cadet, Troy-Bilt, MTD, Craftsman, Yard-Man, White Outdoor and Columbia zero-turn mowers using 954-04044A or a verified interchange number.
Product Specifications
Belt Length: 134.00" / approximately 3404 mm
Top Width: 0.50" / 1/2"
Application: Mower Deck / PTO Spindle Drive
Primary OE: 954-04044A
Cross References: 754-04044A, 954-04044, 754-04044, OCC-754-04044, 490-501-M018, 490-501-F018
IMPORTANT: This is the mower-deck / PTO spindle belt. It is NOT the zero-turn transmission / ground-drive belt. Many compatible RZT platforms use a separate transmission belt such as 954-04043A or its superseding part while using 954-04044A for the cutting deck.
Cub Cadet 50-Inch RZT Fitment
RZT 50: 17WI2ACP010; 17WF2ACP010; 17WF2ACP009; 17RI2ACP256; 17RI2ACP056; 17BA5A7P712; 17BA5A7P710; 17BA5A7P709; 17AI2ACP756; 17AI2ACP710; 17AI2ACP709; 17AI2ACP256; 17AI2ACP056; 17AI2ACP010; 17AI2ACP009; 17AF2ACP010; 17AA5D7P756; 17AA5D7P710; 17AA5D7P709; 17AA5B7P756; 17AA5B7P710
RZT-50 KH: 17YF2ACP010; 17YF2ACP009
RZT-50 KW: 17YI2ACP010; 17AI2ACP056; 17YI2ACP056
RZT-50 VT: 17BK2ACP009; 17WK2ACP010; 17WK2ACP009; 17BK2ACP010; 17VK2ACP009; 17VK2ACP010
RZT-22: 17AA5A7P712; 17AA5A7P710
Cub Cadet 48-Inch Official Exception
Z-Force S48 LP: 17AP5BHB710
Z-Force S48 KH: 53AH5FJB050
Although 954-04044A is sold by Cub Cadet / Troy-Bilt as a 50-inch deck belt, current OEM fitment information also lists these specific Z-Force S48 applications. Do not remove these models only because their cutting deck is 48 inches. Exact model-number fitment takes priority over the nominal belt-family label.
Troy-Bilt Fitment
Mustang XP 50: 17WF2ACP211; 17WF2ACP066; 17WF2ACP011; 17BF2ACP211; 17BF2ACP066; 17BF2ACP011
Mustang RZT 50: 17AF2ACP766; 17AF2ACP711; 17AF2ACP211; 17AF2ACP011
Mustang 50: 17AF2ACP066
RZT 50: 17AA5ABP766
MTD Fitment
RZT50: 17AD2ACP004; 17AF2ACP004
Craftsman Fitment
ZTL7000: 247.250020 / 17AK2ACP099
Yard-Man Fitment
RZT-50: 17AF2ACP004; 17AF2ACP001; 17AD2ACP004
White Outdoor Fitment
ZT-50: 17AK2ACP290; 17AK2ACP090; 17BK2ACP090; 17AA557P790; 17BA5A7P790
ZT-22: 17AA5A7P790
ZT-5000: 17AD2ACP790
Additional Models: 17AK2ACP099; 17AF2ACP897
Columbia Fitment
ZT-50: 17AF2ACP897
RZT-50: 17BK2ACP597; 17AK2ACP597; 17AF2ACP897; 17AK2ACP897
Important Fitment Notes
Most 954-04044A applications are older residential RZT zero-turn mowers with 50-inch decks, especially Cub Cadet RZT50 and Troy-Bilt Mustang platforms. However, specific Cub Cadet Z-Force S48 models are also officially listed for this belt. Deck width alone is therefore not sufficient to confirm or reject fitment.
Do Not Assume Every 50-Inch Cub Cadet Uses 954-04044A
Newer Cub Cadet RZT / Ultima / ZT-series mowers can use other 50-inch deck-belt part numbers such as 954-05078, 954-04077A, 954-04240, 954-05008 or other model-specific belts. A search phrase containing “Cub Cadet 50 inch deck belt” is relevant traffic, but the exact model number and original OE number must still be verified before purchase.
Do Not Confuse Deck Belt and Transmission Belt
Search phrases such as “Cub Cadet RZT 50 drive belt” can be ambiguous. On models such as Craftsman ZTL7000 / MTD-built RZT platforms, the transmission belt is a separate part while 954-04044A is the PTO/deck spindle belt. If the mower will not move but the blades operate normally, verify the transmission belt instead of ordering this deck belt.
Size Verification
Official specification: 0.50-inch top width x 134.00-inch length.
A used mower-deck belt may stretch, glaze or distort, so an old-belt measurement can differ slightly from the new-belt specification. Verify the original OE number, exact model number, deck system and routing together with the dimensions.
Recommended Replacement
Replace the deck belt when you notice blade slipping, uneven cutting, squealing, vibration, reduced blade speed, repeated belt jumping, cracks, frayed edges, glazing, exposed cords or obvious stretching. Replacing a severely worn belt before complete failure can help restore stable PTO engagement and more consistent cutting performance.
Quality Manufacturing
Built for demanding mower-deck engagement, this replacement belt uses reinforced tensile construction with a durable wrapped surface to help resist stretching, abrasion, pulley friction, heat, dust, grass clippings and repeated flexing. Correct fit, routing and tension help support smooth blade engagement and dependable deck performance.
Installation Inspection
Before removing the old belt, photograph the complete deck-belt routing and compare it with the mower parts diagram or routing decal. Inspect spindle pulleys, idler pulleys, pulley bearings, tension arm, spring, belt guides/keepers, PTO components, spindle bearings and pulley alignment.
A seized bearing, bent keeper, weak spring, damaged pulley groove, misalignment or incorrect routing can cause a new belt to slip, squeal, overheat, fray, jump off or fail prematurely. Make sure the belt is fully seated in every pulley groove and properly positioned inside all guides. Do not apply oil, grease, silicone spray or belt dressing.
Why Should You Choose Us?
Built for Consistent Blade Drive
A correctly matched 954-04044A replacement belt helps transfer PTO power through the mower deck for steadier blade speed and more consistent cutting performance.
Fitment-Focused Listing
This listing uses exact model-number fitment and clearly preserves the official Z-Force S48 exception while separating RZT50 deck-belt searches from transmission-belt searches. This helps reduce wrong-belt purchases caused by selecting only from deck width or mower-family names.
After-Sales Support
Your purchase is backed by our lifetime warranty and responsive after-sales support. If you have questions about 954-04044A fitment, deck routing, installation, squealing, slipping, belt jumping or premature wear, please contact us through Amazon.
For faster assistance, provide the mower brand, exact model number, original belt number and clear photos of the old belt and pulley route. Our support team will respond within 24 hours and help with troubleshooting, replacement or warranty support.
All brand names, mower model numbers and part numbers are used for compatibility identification only. This is an aftermarket replacement product.
Sold by
Amazon Warehouse
Official Amazon outlet for open-box & returned items
- Backed by Amazon's A-to-Z Guarantee
- 30-day return policy
- Ships from Amazon fulfillment centers
- Price verified on Amazon
Product Details
- SKU:
- awhd-us-b0h1wq4jnp
- Model:
- 754-04044
- Country:
- US
- ASIN:
- B0H1WQ4JNP
- UPC:
- 756505629092
Shopping Smarter
Common questions about buying open-box and refurbished.
Why buy refurbished or open-box?
Refurbished and open-box products offer the same performance as new at a fraction of the price. You're already saving $2 on this listing. They've been inspected, tested, and are ready to use — the only difference is the price tag. Buying refurbished also reduces electronic waste, extending product life cycles and keeping functional devices out of landfills.
What's the difference between open-box and refurbished?
Open-box products are customer returns that have been inspected and confirmed functional. They may show little to no use — often the item was returned simply because the buyer changed their mind. Refurbished products have been professionally repaired or restored by technicians, tested to meet or exceed manufacturer specifications, and sometimes come with a warranty. Both are a smart alternative to buying new.
Why use OpenBoxFox?
Finding refurbished deals is time-consuming — you'd have to check Amazon Warehouse, Reebelo, Dyson Outlet, and others separately for Autoverve products. OpenBoxFox aggregates these listings in one place, so you can compare and find the best deal without the legwork. We update pricing daily so you always see current availability and real savings.
Is it safe to buy refurbished?
Yes. Products listed on OpenBoxFox come from established retailers like Amazon, Reebelo, and Dyson — not unknown third-party sellers. Each retailer has buyer protection policies, return windows, and in some cases warranties. You get the price advantage of used goods with the purchase security of a known retailer.
