Add to favorites
Autoverve 119-8820 Toro TimeCutter 50 Inch Deck Belt Fit SS5000 SS5035 SS5060 MX5000 MX5025 MX5050 MX5060 MX5075 5000 5000C MX5075T MyRIDE SW5000 SWX5000 ZS5000 Replace 120-3892 119-8820-SL Lawn Mower — Open-Box, 11% Off
Brand: Autoverve
Condition: Used - VeryGood
$2230
$2499
-11% Save $269
Updated: 13 days ago
Description
【Recommended Replacement】: A worn 119-8820 deck belt can cause slipping blades, squealing, uneven cutting, reduced blade speed, or sudden belt failure. Replace the belt when you notice cracks, frayed edges, glazing, exposed cords, stretching, or repeated jumping from the pulleys. Built with high-strength aramid tensile cords and a wear-resistant wrapped cover, this 0.5" x 141.5" covered deck belt is designed for repeated clutching, bending, heat, dust, and demanding mower-deck use. Verify OEM number, mower model, serial range, and 50-inch deck configuration before purchase.
【Quality Manufacturing】: Built for demanding mower-deck use, this 119-8820 replacement belt combines high-strength aramid tensile cords with a wear-resistant wrapped fabric cover. The aramid core helps control stretching and maintain stable tension, while the outer wrap helps resist abrasion, heat, dust, grass clippings, and repeated flexing around spindle and idler pulleys. Size: 0.5" top width x 141.5" covered length. Designed to support smooth power transfer, reduced slipping, consistent blade speed, and dependable cutting performance when correctly routed and tensioned.
【Wide Toro TimeCutter Fitment】: Fits selected 50-inch Toro TimeCutter models using 119-8820, including 5000, 5000C, MX5000, MX5025, MX5050, MX5060, MX5075, MX5075T, MR5075T, MyRIDE, ZS5000, ZS5000TF, SS5000, SS5035, SS5060, SW5000, SWX5000 and SWX5050. Model numbers include 74387, 74395, 74630, 74631, 74632, 74635, 74637, 74638, 74641, 74643, 74660, 74661, 74680, 74688, 74694, 74695, 74696, 74727, 74730, 74731, 74732, 74770-74776, 74790, 74795, 74797, 74798, 75750, 75750TA, 75750W, 75751, 75753, 75755, 75755TA, 75755W, 75759 and 75761TA.
【Exmark Quest Fitment & Check Before Buying】: Fits selected Exmark Quest 50-inch decks using 119-8820 / 119-8820-SL, including QSS708GEM50200, QSS725GKC50200, QT24KA501, QTE691KA501, QTE708GEM50200, QTE735KC501, QTE735KC502, QTS691KA502, QTS708GEM50200, QTS725GKC50200, QTS735KC502, QZE722GKC50200, QZE722GEE50200, QZE725GKC50200, QZS691CKA50200 and QZS708GEM50200. This is the mower deck blade-drive belt, not the traction belt. Do not order by 50-inch deck size or length alone; verify the original OE number, model, serial range, width, and routing diagram.
【Hassle-Free Support】: Your purchase is backed by our lifetime warranty and responsive after-sales support. If you have questions about 119-8820 fitment, serial-number compatibility, belt routing, installation, squealing, slipping, jumping, overheating, or premature wear, please contact us through Amazon. For faster help, include your mower model number, serial number, deck size, original belt number, and clear photos of the belt and pulley route. Our support team will respond within 24 hours and help identify the cause, provide troubleshooting guidance, or arrange an appropriate replacement or warranty solution.
Compatible With
Replacement mower deck belt for Toro 119-8820, Exmark 119-8820-SL and compatible 120-3892 applications.
Designed for selected Toro TimeCutter and Exmark Quest 50-inch mower deck applications.
Product Specifications
Covered Length: 141.5" / 3594 mm
Top Width: 0.5" / 12.7 mm
Material: High-Strength Aramid Tensile Cords
Construction: Wear-Resistant Wrapped V-Belt
Application: Mower Deck Blade Drive
Reference Numbers: 119-8820, 119-8820-SL, 120-3892
IMPORTANT: This is the mower deck blade-drive belt that transfers power through the deck pulley system to the cutting blades. It is NOT the traction, hydrostatic transmission, or ground-drive belt that moves the mower.
Toro TimeCutter 50-Inch Fitment
Fits selected Toro TimeCutter 50-inch mower deck applications using 119-8820, including:
TimeCutter ZS 5000:
74387, 74660, 74661, 74688
TimeCutter ZS 5000TF:
74395
TimeCutter SS 5000:
74630, 74631, 74637, 74730, 74731, 74732
TimeCutter SS 5035:
74635
TimeCutter SS 5060:
74632, 74638
TimeCutter MX 5060:
74641, 74643
TimeCutter SW 5000:
74680, 74790
TimeCutter MX 5075T / MR5075T:
74694, 74695, 74696
TimeCutter MX 5025:
74727, 74776
TimeCutter MX 5050:
74770, 74771, 74774, 74774TA
TimeCutter MX 5000:
74772, 74773, 74775, 75750TA, 75759
TimeCutter SWX 5000:
74795
TimeCutter SWX 5050:
74797, 74798
TimeCutter 5000:
75750, 75750W, 75751
TimeCutter 5000C:
75753
TimeCutter MX 5075:
75755, 75755TA, 75755W
TimeCutter MyRIDE 50-Inch:
75761TA
Exmark Quest 50-Inch Fitment
Fits selected Exmark Quest 50-inch mower deck applications using 119-8820 or 119-8820-SL, including:
Quest / Quest E-Series / Quest S-Series:
QT24KA501
QTE691KA501
QTE735KC501
QTE735KC502
QTS691KA502
QTS735KC502
QZE722GKC50200
QZE722GEE50200
QZE725GKC50200
QZS691CKA50200
QZS708GEM50200
Quest Drive-Lever Applications:
QTE708GEM50200
QTS708GEM50200
QTS725GKC50200
Quest Front-Steer Applications:
QSS708GEM50200
QSS725GKC50200
Important Fitment Notes
Many Toro TimeCutter and Exmark Quest mowers were produced with different deck sizes, serial-number ranges, pulley arrangements, and belt systems. The mower family name or 50-inch deck size alone cannot guarantee compatibility.
Before ordering, please verify that:
1. You need the mower deck blade-drive belt, not the traction or transmission belt.
2. Your original belt or equipment parts diagram specifies 119-8820, 119-8820-SL, 120-3892, or a verified equivalent.
3. Your mower model number and serial-number range match the applicable deck configuration.
4. The required belt is approximately 0.5" wide with a 141.5" covered length.
5. Your original belt routing matches the mower deck routing diagram.
Do Not Buy by Deck Size Alone
Not every Toro TimeCutter or Exmark Quest mower with a 50-inch cutting deck uses 119-8820. Similar-looking machines may use different belts depending on model number, production year, serial-number range, deck design, and pulley configuration.
If your mower only says "TimeCutter 50", "Quest 50", or another family name but you cannot locate the original belt number, check the mower identification plate and equipment parts diagram before ordering.
Size Verification
This replacement belt is specified at 0.5" top width x 141.5" covered length. Belt manufacturers and parts catalogs may use different measurement methods, so published measurements for equivalent replacement belts may vary slightly. Do not select a replacement solely by an approximate length measurement. Always prioritize the original OE number, mower model, serial number, deck configuration, and belt routing.
Recommended Replacement
A mower deck belt operates under repeated engagement, bending, tension, heat, dust, grass debris, and changing loads. As the belt wears, power transfer to the cutting blades can become unstable.
Consider replacing the belt when you notice:
Cracks in the belt surface
Frayed or damaged edges
Glazing or a shiny hardened surface
Exposed tensile cords
Stretching or loss of tension
Squealing during blade engagement
Belt jumping or coming off pulleys
Reduced blade speed
Uneven cutting performance
Excessive belt heat or burning smell
Replacing a worn belt before complete failure can help restore stable blade engagement and consistent cutting performance.
Quality Manufacturing
Constructed with high-strength aramid tensile cords to help control stretching and maintain stable tension during repeated starting, stopping, bending, and mower-deck operation. The wear-resistant wrapped fabric cover helps protect the belt against abrasion, friction, heat, dust, grass clippings, and outdoor debris.
The flexible wrapped construction is designed to travel smoothly around spindle and idler pulleys while maintaining dependable power transfer. When correctly matched, routed, and tensioned, the belt helps support steady blade speed and cleaner, more efficient mowing.
Installation Inspection
Before removing the original belt, photograph the complete belt routing and compare it with the routing diagram on the mower or in the owner's manual.
Inspect the following components before installing a new belt:
Spindle pulleys
Idler pulleys
Pulley bearings
Idler arm
Tension spring
Belt guides and keepers
Deck spindle bearings
PTO clutch area
Pulley alignment
Deck mounting components
A seized bearing, bent belt guide, weak tension spring, damaged pulley groove, misaligned pulley, or incorrect belt routing can cause a new belt to slip, squeal, overheat, fray, jump off, or fail prematurely.
Make sure the belt is fully seated in every pulley groove and positioned correctly inside all belt guides and keepers. Do not twist the belt, force it over a pulley with sharp tools, or apply oil, grease, silicone spray, or belt dressing.
Why Should You Choose Us?
High-Strength Aramid Construction
The aramid tensile-cord structure is designed for demanding outdoor power-equipment applications where the belt repeatedly bends, engages, and operates under load. The wrapped exterior helps support smooth pulley contact while protecting the internal tensile structure against abrasion and debris.
Built for Consistent Blade Drive
Correct belt tension and stable pulley engagement help transfer engine power through the mower deck to the blade spindles. A properly fitted 119-8820 replacement belt helps reduce slipping and supports consistent blade speed for smoother and more efficient cutting performance.
Fitment-Focused Support
Because Toro and Exmark equipment may use different belts within the same mower family, we recommend verifying the model number, serial number, deck size, original belt number, and belt routing before purchase. This helps avoid choosing the wrong belt based only on mower appearance, 50-inch deck width, or an approximate length measurement.
After-Sales Support
Your purchase is backed by our lifetime warranty and responsive after-sales support. If you have questions about fitment, belt routing, installation, slipping, squealing, jumping, abnormal heat, or premature wear, please contact us through Amazon.
For faster assistance, please provide your mower model number, serial number, deck size, original belt number, and clear photos of the belt and pulley routing. Our support team will respond within 24 hours and help identify the cause and provide appropriate troubleshooting, replacement, or warranty assistance.
All brand names, mower model numbers, and part numbers are used for compatibility identification only. This is an aftermarket replacement product.
Replacement mower deck belt for Toro 119-8820, Exmark 119-8820-SL and compatible 120-3892 applications.
Designed for selected Toro TimeCutter and Exmark Quest 50-inch mower deck applications.
Product Specifications
Covered Length: 141.5" / 3594 mm
Top Width: 0.5" / 12.7 mm
Material: High-Strength Aramid Tensile Cords
Construction: Wear-Resistant Wrapped V-Belt
Application: Mower Deck Blade Drive
Reference Numbers: 119-8820, 119-8820-SL, 120-3892
IMPORTANT: This is the mower deck blade-drive belt that transfers power through the deck pulley system to the cutting blades. It is NOT the traction, hydrostatic transmission, or ground-drive belt that moves the mower.
Toro TimeCutter 50-Inch Fitment
Fits selected Toro TimeCutter 50-inch mower deck applications using 119-8820, including:
TimeCutter ZS 5000:
74387, 74660, 74661, 74688
TimeCutter ZS 5000TF:
74395
TimeCutter SS 5000:
74630, 74631, 74637, 74730, 74731, 74732
TimeCutter SS 5035:
74635
TimeCutter SS 5060:
74632, 74638
TimeCutter MX 5060:
74641, 74643
TimeCutter SW 5000:
74680, 74790
TimeCutter MX 5075T / MR5075T:
74694, 74695, 74696
TimeCutter MX 5025:
74727, 74776
TimeCutter MX 5050:
74770, 74771, 74774, 74774TA
TimeCutter MX 5000:
74772, 74773, 74775, 75750TA, 75759
TimeCutter SWX 5000:
74795
TimeCutter SWX 5050:
74797, 74798
TimeCutter 5000:
75750, 75750W, 75751
TimeCutter 5000C:
75753
TimeCutter MX 5075:
75755, 75755TA, 75755W
TimeCutter MyRIDE 50-Inch:
75761TA
Exmark Quest 50-Inch Fitment
Fits selected Exmark Quest 50-inch mower deck applications using 119-8820 or 119-8820-SL, including:
Quest / Quest E-Series / Quest S-Series:
QT24KA501
QTE691KA501
QTE735KC501
QTE735KC502
QTS691KA502
QTS735KC502
QZE722GKC50200
QZE722GEE50200
QZE725GKC50200
QZS691CKA50200
QZS708GEM50200
Quest Drive-Lever Applications:
QTE708GEM50200
QTS708GEM50200
QTS725GKC50200
Quest Front-Steer Applications:
QSS708GEM50200
QSS725GKC50200
Important Fitment Notes
Many Toro TimeCutter and Exmark Quest mowers were produced with different deck sizes, serial-number ranges, pulley arrangements, and belt systems. The mower family name or 50-inch deck size alone cannot guarantee compatibility.
Before ordering, please verify that:
1. You need the mower deck blade-drive belt, not the traction or transmission belt.
2. Your original belt or equipment parts diagram specifies 119-8820, 119-8820-SL, 120-3892, or a verified equivalent.
3. Your mower model number and serial-number range match the applicable deck configuration.
4. The required belt is approximately 0.5" wide with a 141.5" covered length.
5. Your original belt routing matches the mower deck routing diagram.
Do Not Buy by Deck Size Alone
Not every Toro TimeCutter or Exmark Quest mower with a 50-inch cutting deck uses 119-8820. Similar-looking machines may use different belts depending on model number, production year, serial-number range, deck design, and pulley configuration.
If your mower only says "TimeCutter 50", "Quest 50", or another family name but you cannot locate the original belt number, check the mower identification plate and equipment parts diagram before ordering.
Size Verification
This replacement belt is specified at 0.5" top width x 141.5" covered length. Belt manufacturers and parts catalogs may use different measurement methods, so published measurements for equivalent replacement belts may vary slightly. Do not select a replacement solely by an approximate length measurement. Always prioritize the original OE number, mower model, serial number, deck configuration, and belt routing.
Recommended Replacement
A mower deck belt operates under repeated engagement, bending, tension, heat, dust, grass debris, and changing loads. As the belt wears, power transfer to the cutting blades can become unstable.
Consider replacing the belt when you notice:
Cracks in the belt surface
Frayed or damaged edges
Glazing or a shiny hardened surface
Exposed tensile cords
Stretching or loss of tension
Squealing during blade engagement
Belt jumping or coming off pulleys
Reduced blade speed
Uneven cutting performance
Excessive belt heat or burning smell
Replacing a worn belt before complete failure can help restore stable blade engagement and consistent cutting performance.
Quality Manufacturing
Constructed with high-strength aramid tensile cords to help control stretching and maintain stable tension during repeated starting, stopping, bending, and mower-deck operation. The wear-resistant wrapped fabric cover helps protect the belt against abrasion, friction, heat, dust, grass clippings, and outdoor debris.
The flexible wrapped construction is designed to travel smoothly around spindle and idler pulleys while maintaining dependable power transfer. When correctly matched, routed, and tensioned, the belt helps support steady blade speed and cleaner, more efficient mowing.
Installation Inspection
Before removing the original belt, photograph the complete belt routing and compare it with the routing diagram on the mower or in the owner's manual.
Inspect the following components before installing a new belt:
Spindle pulleys
Idler pulleys
Pulley bearings
Idler arm
Tension spring
Belt guides and keepers
Deck spindle bearings
PTO clutch area
Pulley alignment
Deck mounting components
A seized bearing, bent belt guide, weak tension spring, damaged pulley groove, misaligned pulley, or incorrect belt routing can cause a new belt to slip, squeal, overheat, fray, jump off, or fail prematurely.
Make sure the belt is fully seated in every pulley groove and positioned correctly inside all belt guides and keepers. Do not twist the belt, force it over a pulley with sharp tools, or apply oil, grease, silicone spray, or belt dressing.
Why Should You Choose Us?
High-Strength Aramid Construction
The aramid tensile-cord structure is designed for demanding outdoor power-equipment applications where the belt repeatedly bends, engages, and operates under load. The wrapped exterior helps support smooth pulley contact while protecting the internal tensile structure against abrasion and debris.
Built for Consistent Blade Drive
Correct belt tension and stable pulley engagement help transfer engine power through the mower deck to the blade spindles. A properly fitted 119-8820 replacement belt helps reduce slipping and supports consistent blade speed for smoother and more efficient cutting performance.
Fitment-Focused Support
Because Toro and Exmark equipment may use different belts within the same mower family, we recommend verifying the model number, serial number, deck size, original belt number, and belt routing before purchase. This helps avoid choosing the wrong belt based only on mower appearance, 50-inch deck width, or an approximate length measurement.
After-Sales Support
Your purchase is backed by our lifetime warranty and responsive after-sales support. If you have questions about fitment, belt routing, installation, slipping, squealing, jumping, abnormal heat, or premature wear, please contact us through Amazon.
For faster assistance, please provide your mower model number, serial number, deck size, original belt number, and clear photos of the belt and pulley routing. Our support team will respond within 24 hours and help identify the cause and provide appropriate troubleshooting, replacement, or warranty assistance.
All brand names, mower model numbers, and part numbers are used for compatibility identification only. This is an aftermarket replacement product.
Sold by
Amazon Warehouse
Official Amazon outlet for open-box & returned items
- Backed by Amazon's A-to-Z Guarantee
- 30-day return policy
- Ships from Amazon fulfillment centers
- Price verified on Amazon
Product Details
- SKU:
- awhd-us-b0h1wtfxly
- Model:
- 119-8820
- Country:
- US
- ASIN:
- B0H1WTFXLY
- UPC:
- 737453433498
Shopping Smarter
Common questions about buying open-box and refurbished.
Why buy refurbished or open-box?
Refurbished and open-box products offer the same performance as new at a fraction of the price. You're already saving $3 on this listing. They've been inspected, tested, and are ready to use — the only difference is the price tag. Buying refurbished also reduces electronic waste, extending product life cycles and keeping functional devices out of landfills.
What's the difference between open-box and refurbished?
Open-box products are customer returns that have been inspected and confirmed functional. They may show little to no use — often the item was returned simply because the buyer changed their mind. Refurbished products have been professionally repaired or restored by technicians, tested to meet or exceed manufacturer specifications, and sometimes come with a warranty. Both are a smart alternative to buying new.
Why use OpenBoxFox?
Finding refurbished deals is time-consuming — you'd have to check Amazon Warehouse, Reebelo, Dyson Outlet, and others separately for Autoverve products. OpenBoxFox aggregates these listings in one place, so you can compare and find the best deal without the legwork. We update pricing daily so you always see current availability and real savings.
Is it safe to buy refurbished?
Yes. Products listed on OpenBoxFox come from established retailers like Amazon, Reebelo, and Dyson — not unknown third-party sellers. Each retailer has buyer protection policies, return windows, and in some cases warranties. You get the price advantage of used goods with the purchase security of a known retailer.
