ZATOOTO Tesla Model 3 Car Window Shades 4Pack | Clear for Safe Driving | Bluish-Purple for Passenger Comfort | UV Protection | Static Cling Side Window Sun Shade Blocker with Storage Bag | 2018-2026 | — Open-Box, 11% Off

⚠️According to market research, it has been found that the static cling car shades may fall off easily if applied without water. To ensure a strong, long-lasting hold, please clean the window glass and lightly wet both the glass surface and the static cling side of the sunshade before installation. This can activate the electrostatic adhesion force and reduce the problem of falling off

⚠️Precisely trimmed to fit Tesla’s rear window. When closed, the B/C pillar overlaps the glass. Gently bend both sides inward, tuck edges into the gap between pillar and window. Release — the sunshade stays firmly in place with its flexibility and static cling

【Custom Fit for Tesla Model 3 Side Windows】 Each Tesla Model Y car sun shade is precisely cut to match the 2018-2026 Tesla Model 3’s window curves, provides a secure and neat fit compared to universal car window shades

【Why Clear Front & Bluish-Purple Rear?】 Clear film front window car shades preserves driving visibility where it matters most, while Bluish-Purple film back window car shades provides stronger sun and heat reduction for rear passengers. This combination is intentionally designed to balance safety and comfort in everyday driving

【Weak Light / Nighttime Visibility Reminder】 Bluish-Purple film Tesla Model 3 car window shade for baby blocks sunlight strongly, but in low-light or nighttime conditions, it may slightly reduce visibility. Please drive cautiously and remove the shade if needed

【Pre-Leave Gap for Safe Door Operation】 Designed for Tesla’s frameless doors, a small section is intentionally left unshaded to allow safe door movement. ❗❗❗Windows must remain fully closed while the car window shades for side window are installed and cannot be rolled up or down during use

【Easy Installation, Reusable for Long-Term Use】 Tesla Model 3 static cling sun blocker allows tool-free installation and removal. Just wet the glass and the film before installation. Included storage bag protects the Tesla Model 3 car window cover from dust and ensures long-term performance

Vehicle Compatibility Tesla Model 3 front Windows | 2018-2025 | (Designed specifically for frameless window structure) Window Position Requirement Designed for use with the window fully closed. Due to the custom-fit electrostatic design, the window cannot be rolled up or down while the sun shade is installed. Material & Construction Dual-layer design featuring a Bluish-Purple semi-transparent electrostatic film combined with inner mesh support. Reinforced steel wire frame improves edge stability and extends product lifespan. Light & Visibility Performance Reduces harsh sunlight and glare while maintaining forward visibility for driving. In low-light or nighttime conditions, the Bluish-Purple film may slightly affect visibility. Removal is recommended when needed. Design for Tesla Frameless Doors A small reserved gap is intentionally designed to allow safe door opening and closing. This prevents interference with Tesla’s automatic window drop mechanism. Installation Method Electrostatic static cling installation. No adhesive, no tools required. Reusable and residue-free. Care & Storage Clean the glass surface before installation. Avoid touching the film surface with dusty or dirty hands. Store flat in the included storage bag when not in use to maintain adhesion and appearance.