XUNTUI Copper Pipe Cutter Tube Cutter, 3/16"-2" OD Copper Tubing Cutter for Brass, Aluminum, Thin-Wall Stainless Tubing with Deburrer and Spare Wheel

3/16"-2" Actual OD Cutting Range: Designed for tubing and pipe measured by actual outside diameter. Fits up to 2" OD tubing and many 1-1/2" NPS metal pipes, depending on pipe type and wall thickness. Not for 2" NPS pipe, which is larger than 2" OD. Always measure the outside diameter before ordering

For Metal Tubing Only: Built for copper tubing, copper pipe, brass, aluminum, and thin-wall stainless tubing. Not recommended for PVC, plastic pipe, cast iron, thick-wall steel pipe, or thick-wall stainless pipe. For stainless cuts, use cutting fluid to help reduce heat and improve cutting control. Cutting fluid is not included

6-Roller Tracking and SKD11 Cutting Wheel: The 6-roller bearing design helps keep tubing centered for smoother, more square cuts. The hardened SKD11 cutting wheel is made for compatible copper, brass, aluminum, and thin-wall stainless tubing. The non-slip feed knob allows controlled pressure adjustment during cutting

Use Gradual Feed Pressure: Place the tube between the rollers and cutting wheel, tighten the knob lightly, rotate the cutter 1-2 full turns, then tighten gradually and repeat until the cut is complete. Do not over-tighten in one step, as excessive pressure may deform thin-wall tubing or cause uneven cuts

Complete Cutter and Deburring Kit: Includes 1 tube cutter, 1 deburring tool, 1 spare SKD11 cutting wheel, and 1 HSS deburring blade. Deburr after cutting to clean inside edges and help prepare tubing for repair, installation, HVAC, plumbing, and general metal tubing work

The XUNTUI Heavy Duty Tube Cutter is designed for clean, controlled cuts on compatible metal tubing and pipe measured by actual outside diameter. With a 3/16"-2" OD cutting range, it works with copper tubing, copper pipe, brass, aluminum, and thin-wall stainless tubing for HVAC, plumbing, automotive, repair, and jobsite tubing work. Before ordering, always confirm the actual outside diameter of your pipe or tubing. This cutter fits up to 2" actual OD tubing and many 1-1/2" NPS metal pipes, depending on pipe type and wall thickness. It is not designed for 2" NPS pipe, which is larger than 2" OD. The 6-roller bearing tracking system helps keep the tube centered, while the SKD11 cutting wheel and smooth-feed knob allow controlled cutting pressure. For best results, tighten gradually after each rotation. Do not over-tighten in one step, especially on thin-wall tubing, as excessive pressure may deform the tube or cause uneven cuts. This kit includes a tube cutter, deburring tool, spare SKD11 cutting wheel, and HSS deburring blade. Use the deburring tool after each cut to clean inside edges and prepare the tubing for installation or repair. Not recommended for PVC, plastic pipe, cast iron, thick-wall steel pipe, thick-wall stainless pipe, pipe threading, ratcheting cutting, or tight-space applications where the tool cannot rotate around the tube