WEINEX All-in-One Aluminum Door Hinge Jig, Door Lock & Latch Install Kit — Open-Box, 5% Off

ALL-METAL BUILD THAT WON'T FLEX OR CRACK: Machined from aluminum alloy with a reinforced 4mm+ template wall, WEINEX holds a true line under clamp and router pressure not the bowing and off-center gouging that plagues plastic jigs

ONE BOX, THREE JOBS, NO SEPARATE PURCHASES: A true all-in-one kit: hinge jig, door lock template (1-3/8"-1-3/4" doors), latch template for standard 1"x2-1/4" plates, carbon-steel hole saws, router bit, self-centering screw bit, and screwdriver bit.

POSITIVE SCREW-CLAMP, NOT FRICTION-ONLY: Skip the "too loose it slides, too tight it's off-center" trade-off of clamp-only jigs. A positive screw-clamp locks the template in place; a built-in depth gauge keeps mortise depth consistent.

FITS 2.5"-5" HINGES, SQUARE, 1/4" & 5/8" RADIUS: One adjustable template covers the hinge sizes and corner styles on most standard 1-3/8" and 1-3/4" interior doors - one jig for a whole house of doors, not one template per hinge size.

BUILT FOR FIRST-TIME DIYERS AND PROS ALIKE: A self-centering hinge screw bit keeps pilot holes on-mark, silicone anti-skid pads protect prefinished doors, and an illustrated manual guides the install. Router sold separately; router bit included.

Replacing or hanging interior doors usually means hours of hand-chiseling hinge mortises and a plastic jig that flexes the moment your router bites in, leaving an off-center cut you have to fill and redo. WEINEX was built to end that trade-off. The WEINEX jig body is machined from aluminum alloy, not molded plastic, with a reinforced template wall at every load-bearing edge. A positive screw clamp not a friction-only clip locks the template to the door and holds it there through full router side-load, while a built-in depth gauge keeps mortise depth the same on hinge one and hinge twenty. It is a true all-in-one door hardware kit, not just a hinge jig. In the box: the adjustable hinge mortising template (fits 2.5" to 5" hinges, square corners, and 1/4" or 5/8" radius corners), a door lock installation template for standard 1-3/8" and 1-3/4" doors, a door latch template sized for standard 1" x 2-1/4" strike plates, carbon-steel hole saws for knob and deadbolt bores, a router bit, a self-centering hinge screw bit, a double-ended screwdriver bit.Whether you're replacing a single worn door, upgrading hardware on eight interior doors during a renovation, or hanging doors as part of a contracting job, one WEINEX kit handles the hinge mortise, the lock bore, and the latch recess no separate jigs, no guessing at depth, no eyeballing the hinge position. For wooden interior doors only; not rated for metal, MDF, or door jambs. A standard handheld or trim router is required and sold separately the router bit is included.WEINEX: precision hinge, lock, and latch installation in one aluminum kit - built to outlast the plastic jig you're replacing.