WANJAO Marking Spray, Marking Powder Enhanced Engraving with Sponge Brush Water Based Safe Low Odor Fast Drying Suit for Metal, Wood, Glass 150ml

Enhanced engraving effect: Water-based marking spray for engraving fluid is mainly used to enhanc the engraving effect, fine pattern engraving, make the mark more obvious and durable, and is mainly suitable for engraving machines Features: U V engraving fluid is based on water, non-toxic, low odor, fast drying speed, 5-10 minutes to achieve drying effect, directly use water to remove the residual engraving fluid on the surface, good covering power, high whiteness Wide application: marking spray for metal material surfaces, such as: aluminum, copper, titanium, etc.; can also be applied to wood, acrylic, glass, ceramics, plastics, leather, stone and other material surfaces Easy to use: Evenly mix and apply directly to the material surface, wait for 5-10 minutes, engrave after the surface is completely dry, and wash directly with water after completion. Note: When operating, if the product has a curve, please align the curved part with the instrument when marking, otherwise the product may not be able to be marked. Package includes: 150ml engraving fluid + sponge brush, which can be used to cover the surface of the substrate before engraving, which is convenient for engraving or marking. Note the main image: It does not include the cup and metal plate shown in the picture.

Product name: Engraving Liquid

Net: 150ml

Accessories: 5cm sponge brush

How to use:

1. Clean the surface of the material and shake the liquid to mix evenly.

2. Apply this product to the surface of the engraved object and apply it evenly on the surface of the material with a sponge brush.

3. It will take 5-10 minutes to dry and then you can perform engraving.

4. After the engraving is completed, the engraving liquid can be directly removed with clean water.

Function:

Wood, reduce burrs

Leather, avoid edge burns, more delicate patterns

Acrylic, enhance frosting effect, reduce melting edges

Stone, improve grayscale contrast, suitable for fine graphics

Note:

1. It is recommended to apply by brushing. The amount of liquid applied at one time should not be too much, just ensure that the surface of the material is evenly covered.

2. The drying time of this product will vary due to different ambient temperature, humidity and ventilation conditions.

3. The number of times this product is applied may vary according to the actual use conditions.

4. Please pay attention to the antifreeze storage of the product in cold areas or under low temperature conditions. The storage temperature must not be lower than 5℃.

5. This product is ready to use after opening. The unused materials should be sealed and used as soon as possible.