VIPCAR 4 Pack 1.5 Inch Hubcentric Bolt-on Wheel Spacers 14x1.5 Studs, 5x5.5 to 5x5.5 (5x139.7mm) Bolt Pattern, 77.8mm Center Bore w/Lip, for 2009-2018 Ram 1500 IV, DS/DJ, 5 Bolts Only

【Specification】Type: Hub Centric Bolt-on Spacers, Thickness & Sets: 1.5 Inch(38mm) x 4 Pcs, Wheel & Vehicle Bolt Pattern: 5x5.5 to 5x5.5 Inch(5x139.7mm), Stud size: 14x1.5, Center Bore: 77.8 mm with lip. Bolt Grade: 10.9, Spacer Material: 6061-T6 High-strength Aluminum Billet, Finish: Hard-Anodized Black. 【Application】1.5 Inch Hubcentric wheel spacer 5x5.5 Bolt pattern 77.8mm hub bore for 5 Bolts 2009-2018 Ram 1500 IV, DS/DJ (2018-2021 Ram 1500 DS). May fit other vehicles, kindly verify using spacer specs. 【Benefit】Wheel spacer help stop wheels and tires from rubbing against the liners, brakes, or other suspension parts, by creating additional space between tires and hubs also being a great solution for complex and costly staggered/negative offset wheel setup, making your vehicle more aggressive, tougher, and stable, allowing lift/lowering kits, larger calipers, or traction tires installation. 【Installation】It’s pretty easy to install if you're a skilled mechanic and you got the correct spacers, however, we do not wanna stress too much about how easy or helpful it was and the time that will save as well as your money, Kindly Read the Description Content and Make it Fit First, Professional Installation was Recommended. 【Warranty & Service】ALL VIPCAR wheel spacers backed in 24 Month/50,000 Miles Warranty. For any pre or after-sale replacements or performance questions or solutions, just email us and we will provide a professional, friendly, and supportive reply within 24 hours, let's hit it!

Buyers Should Be aware to Check and Confirm Concerned Spec below Even if we listed your vehicle as compatible:

【1】Bolt Pattern: 5x5.5 to 5x5.5 Inch (5x139.7mm)

【2】Wheel Studs: M14x1.5 threads, Shorter than 1.5 Inch(38mm)

【3】There is enough space between fender and tires.

【4】Center bore compatible with:  77.8 mm with lip (HubCentric)

Vehicle Application:

Gen IV, DS/DJ Ram 1500 Pickup

2009-2018 Ram 1500, 2WD/4WD, 5 Lugs x 5.5 Inch, M14x1.5 Only

2019-2021 Ram 1500 Classic, 2WD/4WD, 5 Lugs x 5.5 Inch, M14x1.5 Only

*Do not fit properly on 2009-2012 Ram trucks with 9/16" thread pitch, might required to replace matched lug nuts.

*Spacers may also apply on other vehicles that actually have the same bolt pattern, hub bore and studs, kindly verify using spacer specs.

*Installation surface of the hub and spacer must be perfectly aligned and close fit.

*It's Required and Necessary to Re-Torque the Spacers and Wheels after the first 50-100 miles of driving, to prevent the nut from backing off due to the thermal stresses during vehicle running.

*Professional Installation was highly recommended.

*DIY Tools may be needed:

⅜” torque wrench (at least 100 ft-lbs),

⅜” mechanic’s socket set,

Tire iron OR ½” ratchet and socket set

Low-profile floor jack and jack stands etc.