Upper Intake Manifold for 2007-2008 Ford F-150 E-150 E-250 4.6L V8 VIN W, 615-375 Style Replacement, Compatible with 7L3Z-9424-F 7L3Z-9424-B, Gaskets Included — Open-Box, 8% Off

【VERIFY 4.6L VIN W BEFORE ORDERING】Fits 2007-2008 Ford F-150, E-150 and E-250 with 4.6L V8 engine and VIN W. Check the 8th character of your VIN before ordering. Not for 5.4L, V6, 3-valve engines or applications outside the listed years.

【CHECK ENGINE AND YEAR】Designed only for the listed 2007-2008 4.6L V8 applications. Not compatible with 5.4L, 5.0L, 4.2L, V6, 3-valve engines or unlisted model years. This aftermarket manifold follows the 615-375 configuration rather than every application associated with the original OE number.

【SUPPLIED SELF-TAPPING FASTENERS】The 615-375-style modified design uses supplied self-tapping fasteners at certain mounting locations instead of the threaded inserts found on some factory manifolds. Start each fastener straight by hand and tighten only as required. Do not overtighten or repeatedly remove and reinstall screws into composite mounting points.

【IMPORTANT REAR COOLANT CAP CHECK】Before installation, confirm the rear coolant block-off cap is fully seated and the retaining clamp is correctly positioned and securely tightened. After filling the cooling system, pressure-test the system and inspect this connection for leakage or movement before driving.

【CHECK THERMOSTAT SPACER & COOLANT FITTINGS】The supplied thermostat spacer, fitting and related hardware are application-specific parts of the modified design. Compare the original coolant outlet configuration before assembly and use the supplied components as required. Incorrect spacer or fitting installation may cause O-ring damage or coolant leakage.

## FORRIE 615-375 Style Upper Intake Manifold This aftermarket intake manifold is designed around the modified 615-375 configuration for select 2007-2008 Ford vehicles equipped with the 4.6L V8 engine and VIN W. ### FITMENT 2007-2008 Ford F-150 — 4.6L V8, VIN W 2007-2008 Ford E-150 — 4.6L V8, VIN W 2007-2008 Ford E-250 — 4.6L V8, VIN W ### REFERENCE NUMBERS 7L3Z-9424-F 7L3Z-9424-B 7L3Z9424F 7L3Z9424B 615-375 615375 ### IMPORTANT DESIGN INFORMATION This is a modified aftermarket design based on the 615-375 configuration. Its appearance, hardware and certain connection details may differ from the original factory intake manifold. Do not determine compatibility by OE number alone. Verify the vehicle year, model, 4.6L V8 engine and VIN W before ordering. ### IMPORTANT INSTALLATION CHECK Before installation, inspect the rear coolant cap/plug and verify that the retaining clamp is correctly positioned and securely tightened. After installation and before road testing: 1. Verify all coolant, vacuum and hose connections. 2. Fill and bleed the cooling system according to the vehicle service procedure. 3. Pressure-check the cooling system. 4. Inspect the rear coolant cap for leakage or movement. 5. Recheck all connections before driving. Some mounting locations on this modified manifold use supplied self-tapping fasteners. Do not overtighten fasteners installed into composite mounting points. Package includes the upper intake manifold, intake manifold gaskets and application-specific installation hardware.