Upgraded MDS47123619 Washer Door Boot Seal for LG WM3080CW/00 WM3180CW/00 WM3270CW/00 WM3500CW/00 WM3670HVA/01 WM3700HVA/00 WM3700HWA/00 Washing Machine Door Gasket Replaces AGF75223080, PS12081606 — Open-Box, 56% Off

【Note】Before purchasing, be sure to confirm that your appliance model is listed in the compatibility list on Product Description to avoid a wrong purchase. 【Compatibility】The MDS47123619 Door Boot Seal is made mainly fit for LG washer (some specific models). Replaces part numbers 4511798, AGF75223080, AP6236842, PS12081606. (If you are unsure about the compatibility, please send us your model number for verification.) 【Fit Models】WM3080CW/00, WM3180CW/00, WM3270CW/00, WM3500CW/00, WM3670HVA/01, WM3700HVA/00, WM3700HWA/00, 79641262612. (Please make sure your model number is listed above before purchasing). (If your model is not listed, be sure to contact us to verify compatibility before purchasing.) 【NOTICE】The MDS47123619 door bellow has a 0.4'' short drain nipple attached to the bottom of the gasket. If your original bellow had a 2" extension drain hose attached to the gasket, you cannot use this gasket without additional hose pieces, couplers, and clamps. Make sure to check the drainage hose type of your original door seal before ordering. (Removing the front spring, removing the front side of your existing gasket, and looking at the hose) 【DIY Installation】Prepare an inner/outer tub spring expansion removal tool and a stainless steel adjustable hose clamp for the drain tube. Easy to DIY according to relevant YouTube installation videos. TIPS: This seal came with the required tube connection (uncut). Be sure to cut out the hole where the drain tube connects before installation. Depending on the washer model, different potential uncut connections will need to be used, so the holes won't be pre-cut until you decide what you need. Before installation, put it in hot water for few minutes that will help to get it into proper shape. 【Upgraded Quality】The upgraded MDS47123619 washer door boot gasket is made from premium rubber materials, good corrosion resistance and high waterproof, Rigorously tested to ensure long-term effective performance for your washing machine.

MDS47123619 Washing Machine Door Boot Seal

The washing machine door seal can seal the gap between the door and the tub opening. If your washing machine makes noise or leaks at the door seam, you can check if this part needs to be replaced.

Fixes the Following Symptoms:

1. Leak in door seam.

2. Noise at door seam.

3. Door Gasket had odor

4. Door seal is aged or damaged.

Compatible with the Following Models: (Please confirm the compatibility before purchasing)

ONLY FIT: WM3080CW/00, WM3180CW/00, WM3270CW/00, WM3500CW/00, WM3670HVA/01, WM3700HVA/00, WM3700HWA/00, 79641262612.

NOTICE:

1. This door bellow has a 0.4'' short drain nipple attached to the bottom of the gasket. If your original bellow had a 2" extension drain hose attached to the gasket, you cannot use this gasket without additional hose pieces, couplers, and clamps. Make sure to check the drainage hose type of your original door seal before ordering. (Removing the front spring, removing the front side of your existing gasket, and looking at the hose)

2. If you are not sure whether this replacement part is correct, please feel free to contact us through our storefront or ask in Customer Q & A section.

Installation Tips: This seal came with the required tube connection (uncut). Be sure to cut out the hole where the drain tube connects before installation. Depending on the washer model, different potential uncut connections will need to be used, so the holes won't be pre-cut until you actually decide what you need.