Updated ZPB140 Port A Blaster HVAC Coil Cleaning, Coil Jet Cleaner for ac Unit 120V 80W for Indoor or Outdoor, Flow Rate 4L/min, Working Pressure 0.7-1.0MPa

ZPB140 Port A Blaster HVAC Coil Cleaning: mini cleaning machine pump*1, high pressure water gun*1, detachable filter*1, 1.5m inlet tube subassembly*1, 5m outlet tube subassembly*1, specification*1. Voltage：220V-/50-60Hz or 100-120V-/50-60Hz, Flow rate 4L/min, Power：80W, Temperature range：35°F - 120°F (1.66°C to 48.89°C), Working pressure：0.7-1.0MPa.

Suitable for Both Indoor and Outdoor Use: When cleaning the indoor unit, remember to switch to the - setting and adjust the water pressure to low for mist spray mode. For the outdoor unit, switch to the = setting and use high pressure for straight spray mode. Remove the outlet pipe once the pressure gauge is back at zero to avoid spraying water at high pressure towards the work area.

Points for Attention: Prior to making any changes or maintenance, it is important to disconnect the installation from the power source. Do not operate the ZPB140 Port A blaster HVAC coil cleaning pump without water. Avoid running it in areas with potential explosion hazards or flammable materials. To maintain the longevity and efficiency of the Port A blaster HVAC coil cleaning pump, it is necessary to regularly clean it to prevent blockages.

Durable and Portable: The durable casing and lightweight structure make this device ideal for demanding conditions and extended use. It is suitable for use both in a household setting and for mobile cleaning services while on the move. A built-in storage compartment enables you to keep all attachments secure and easily accessible. These attachments consist of strong quick-connect hoses, a wand, and a trigger sprayer.

After-sale: You can reach our service team at any time of day because they are available 24/7. If you have any inquiries about the ZPB140 Port A Blaster HVAC Coil Cleaning, don't hesitate to contact us. We are here to assist you with whatever you need.

When cleaning the indoor unit, remember to switch to the - setting and adjust the water pressure to low for mist spray mode. For the outdoor unit, switch to the = setting and use high pressure for straight spray mode. Remove the outlet pipe once the pressure gauge is back at zero to avoid spraying water at high pressure towards the work area. Prior to making any changes or maintenance, it is important to disconnect the installation from the power source. Do not operate the ZPB140 Port A blaster HVAC coil cleaning pump without water. Avoid running it in areas with potential explosion hazards or flammable materials. To maintain the longevity and efficiency of the Port A blaster HVAC coil cleaning pump, it is necessary to regularly clean it to prevent blockages, especially in the inlet pipe filter, nozzle, and spray gun filter. The durable casing and lightweight structure make this device ideal for demanding conditions and extended use. It is suitable for use both in a household setting and for mobile cleaning services while on the move. A built-in storage compartment enables you to keep all attachments secure and easily accessible. These attachments consist of strong quick-connect hoses, a wand, and a trigger sprayer.