U.S. Solid Solenoid Valve - Zinc-Alloy 24V AC Electric Water Valve, NBR Seal (3/4

• Quick Reaction: The USS-ZSV solenoid valve features a quick reaction ability and is able to be started with zero pressure • Direct Acting: Built with direct acting design, the magnetic valve has strong resistance to impurities in the medium • High Cost-performance: This zinc-alloy solenoid valve offers the same performance and less cost as brass in regular usages • High Flow: The congenital structure of this solenoid valve make it a higher flow capacity than pilot-operated solenoid valve • Applications: This water valve has wide applications including house water, laundry equipment, industrial water control, pumps and so on

While in application of regular water pressure, the USS-ZSV solenoid valves can be an excellent tool to assist you control the water line. It features a zinc alloy valve body, which offer enough pressure resistance to medium but cost less in comparison with brass body.

Specifications:
Pipe Size: 3/4"
Flow Aperture: 20 mm
Body Material: Zinc Alloy
Gasket / Diaphragm / Seal: NBR
Operation Type: Direct Lift Valve
Operation Mode: Normally Closed
Voltage: AC 24V
Power rating: 22 VA
Suitable Media: Water, oil, Diesel fuel, kerosene etc.
Operational pressure range: Air/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)
Flow value: 7.6 Cv
Temperature, Minimum: 14 degrees Fahrenheit (-10 degrees Celsius)
Temperature Maximum: 176 degrees Fahrenheit (80 degrees Celsius)

OVERHEATING WARNING: Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80℃), which is fully complied with national standard: JB/T7352-2010. If energized continuously for more than 8 hours the coil may burn.