TuTuYa Fender Flares, 4.9Ft/1.5m Universal Carbon Fiber Car Wheel Fender Extension Moulding Flares Auto Tyre Eyebrow Trim Strip Stick Out Edge,Pack of 4 Pcs

【IMPORTANT】Because the car wheel fender is made of high-strength soft rubber so that it is easy to deform.in order to ensure it be more stable after the install, if possible,you could heat it before install,and adjust to best fit the shape of your car tires eyebrow then stick wheel fender on the car.How To Install &Tips please kindly check it all !!! 【TIPS TO PREVENT FENDER FLARES FALL OFF】1.Please install the car wheel fender in good weather day or warm indoor.it would be better if use a heat gun or hair dryer to heating the item;they go on easy if you heat up each section of the rubber.(HIGHLY RECOMMEND). 2.Follow installation instruction(HOW TO INSTALL). 3.Leave the car alone for 24 hours after install the wheel fender flare. 【HOW TO INSTALL】1.Clean the pre-installed position,make sure the position is clean and dry before you install. 2. Measure the length of tail in need.3.Cut off excess length,heat it if possible. 4. Use the adhesion promoter(wipe paper) to wipe the pre-installed position,then waiting about 10 seconds. 5. Tear the cover of the glue of one end of car wheel rubber strip then stick on car. 6. Tear more cover of glue slowly and stick it on car slowly with strength. 【FUNCTION】Exterior wheel tyre fender protective and decorative accessories,them prevent collision hurts on the wheel tires and car 【WIDE COMPATIBILITY】The car universal fender flares suitable for all car vehicle,makes your car better show 3D vibrant after installation 【SIZE】Total length is approx.4.9 ft/1.5meter,more specifics of size please check on pictures,thanks! 【FOR BETTER EFFECTIVE】please used a heat gun or hair dryer to heating up the Tape or Glue;they go on easy if you heat up each section of the rubber before install.【if pursuit more higher adhesive quality please strengthen the fender flares by car glues(not included),it's better use adhesive remover((not included)) while disassemble the auto fender flares,normally Not Recommend this way if you has last solution.

Specifics:

the fender flares to prevent collision hurts on the wheel tires

Suitable for most of popular vehicle.

Makes your car better Show 3D vibrant after installation.

Material: High strength soft rubber.

Length: approx.1.5 meter/4.9ft

More specifics of wheel fender,please check on pictures.

Color: Carbon Fiber

Package Includes:

4pcsx 1.5m Car Wheel Tires Eyebrow Strip

How To Install:

1.Clean the pre-installed position,make sure the position is clean and dry before you install.

2. Measure the length of tail in need.

3. Cut off excess length if too long,heat it if possible .

4. Use the adhesion promoter(wipe paper) to wipe the pre-installed position,then waiting about 10 seconds.

5. Tear the cover of the glue of one end of car wheel rubber strip then stick on car.

6. tear more cover of glue slowly and stick it on car slowly with strength.

Tips to prevent car fender flare fall off:

1.Please install the car wheel fender in good weather day or warm indoor.

it would be better if use a heat gun to heating the item;they go on easy if you heat up each section of the rubber.(HIGHLY RECOMMEND)

2.Follow installation instruction.

3.Leave the car alone for 24 hours after install the wheel fender flare.

PS: if pursuit more higher adhesive quality please strengthen the fender flares by car glues(not included) just spread it thin and bam all you trim is holding tight,

please use adhesive remover((not included)) while disassemble the auto fender flares .(Normally Not Recommend)

Please feel free to email us if there is anything about the item