Truck Bed Lights, 60 Inch 3 Pack COB LED Light Kit for Pickup Truck — Open-Box, 11% Off

2376 COB LEDs, No Dark Spots: 3-pack 60" seamless COB strips (6500K white, 40W, 4860LM total) wrap three sides of the cargo bed with smooth, wide-angle light - no dotted glare of standard SMD strips

All-Weather IP67 Protection: fully sealed PVC housing resists rain, snow, mud and car washes in all seasons; flexible strips bend to fit bed rails, wheel wells and tailgate

Safe Fused Wiring Kit Included: waterproof on/off switch, 5A blade fuse, 2-way splitter, extension cable, DC5521 quick connector; the fuse guards your 12V circuit against overload and short-circuit

10-Minute No-Drill Install: strong automotive adhesive plus mounting clips, screws, cable clamps, zip ties and heat shrink tubes; red wire to positive, yellow wire to negative, then test with the switch

Wide 12V Applications: Designed to illuminate both bed rails and the tailgate on most pickup trucks. It also works for SUV, UTV, ATV, van, RV, camper, boat deck, trailer and garage lighting. Please test-fit the strip length before peeling the adhesive backing.

Light up every corner of your full-size truck bed. The CANRIA 3-Pack 60" COB Truck Bed Light Kit wraps three sides of your cargo bed with 2376 COB LEDs (6500K cool white, 40W, 4860LM total) - the highest-output configuration in this series. COB Chip-on-Board strips emit one continuous beam with no dark spots and no dotted glare, so you can see every corner at night, from tailgate to bulkhead. BRIGHT BY DESIGN COB (Chip-on-Board) technology integrates far more LEDs into the same strip than standard SMD designs. The flexible 8mm (0.31 in) LED PCB (11mm / 0.44 in with the black PVC shell) follows bed rails, wheel wells and tailgate for true full-coverage lighting. BUILT FOR ALL WEATHER Fully sealed IP67 PVC housing shrugs off rain, snow, mud and car washes in all seasons. Strips stay put through highway speeds, potholes and off-road vibration. SAFE, FUSED WIRING - ALL INCLUDED Waterproof on/off switch, 5A inline blade fuse (protects your 12V circuit from overload and short-circuit), 2-way splitter, extension cable and DC5521 quick connector. Red wire to positive, yellow wire to negative - no splicing expertise needed. 10-MINUTE NO-DRILL INSTALL 1. Clean and dry the mounting area 2. Peel and stick along the bed rails (use included clips and screws for extra hold) 3. Run the cable through a firewall grommet to the battery 4. Test with the switch, then tidy up with the included zip ties and heat shrink tubes WHAT'S IN THE BOX 3 x 60" COB LED light strips | 1 x waterproof switch with 5A fuse cable | 1 x 2-way splitter extension cable | Mounting clips, stainless steel screws, cable clamps, zip ties, heat shrink tubes WORKS EVERYWHERE Pickup truck beds (covers both bed rails and the tailgate), SUV, camper van, RV, boat deck, trailer, garage - any 12V DC application. Note: 12V DC only. Test-fit the strip length before peeling the adhesive backing.