TRSMIMA Rebar Positioning Chain Assembly - Safety Lanyard Fall Protection Sling Chain Rebar with Swivel Double Self-Locking Snap Hooks Construction Positioning

SWIVEL EYE ANCHORAGE:This retractable lanyard with a rotating top makes your job smoother by preventing lanyard entanglement.Connect Rebar Chain Assembly Snap Hooks to harness side D-rings OR harness shoulder D-rings.Ensure Snap Hooks fully close and lock around D-rings. MAXIMUM 1 connection per D-ring.Connect Rebar Hook to structural rebar; Ensure hook fully closes and locks around rebar. IF RED LOAD INDICATOR IS VISIBLE. DO NOT USE REMOVE FROM SERVICE.

REBAR & SNAP LOCKING GATES: Two Regar Hooks used on Internal Shock Absorbing Lanyard marked are forging steel material,self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb.gate rating.Installation & Use: Connect back-up fall protection system, deemed compatible by a Competent Person, to harness dorsal D-ring.

DURABLE: The heat-treated steel hooks safety tool lanyard is built to last.Its construction is highly resistant to abrasion and aging. It doesn't soften easily from frequent use.Connect Rebar Hook to structural rebar;ensure hook fully closes and locks around rebar. If climbing, ensure that 100% tie-off is maintained at all times.

USAGE:Worker Capacity Weight Range 130-310 lbs.Its double legs allow workers to lean away from walls, while keeping their hands free to perform any necessary work.Connect back-up fall protection system, deemed compatible by a Competent Person, to harness dorsal D-ring.If applicable/necessary, adjust length of Chain Legs by using Quick Link Carabiners to connect chain links. NEVER cross-connect Chain Legs.The rebar positioning chain is NOT a fall arrest lanyard or retractable safety lanyard & should only be used for work positioning!

CERTIFICATED: The tactical lanyard meets all the strict requirements with various safety regulations. Applied to Construction, Climbing, Roofing, Camping, Window cleaning.

Allow Workers To Lean Away From Walls While Keeping Their Hands Free Must Be Accompanied By A Harness With Side Positioning Rings, Such As The Our Unit Is Designed To Comply The Latest, Most Stringent Requirement Of Ansi High Strength Model Quality construction ensures quick and easy adjustments Fall Rebar Chain Assembly The Fall Protection Rebar Positioning Device is perfect for Work Positioning applications on rebar structures. Its double legs allow workers to lean away from walls, while keeping their hands free to perform any necessary work. To function correctly, it must be used in combination with a full-body harness with side positioning D-rings, so that both snap hook components can be properly attached. Installation & Use: Connect back-up fall protection system, deemed compatible by a Competent Person, to harness dorsal D-ring. If applicable/necessary, adjust length of Chain Legs by using Quick Link Carabiners to connect chain links. NEVER cross-connect Chain Legs. Then, connect Rebar Chain Assembly Snap Hooks to harness side D-rings OR harness shoulder D-rings. Ensure Snap Hooks fully close and lock around D-rings. MAXIMUM 1 connection per D-ring. Connect Rebar Hook to structural rebar; ensure hook fully closes and locks around rebar. If climbing, ensure that 100% tie-off is maintained at all times.