TANGSPOWER 48v Battery Charger 54.6V 48Volt Power Supply Adapter Charger — Open-Box, 19% Off

48V Charger: Output 54.6V 1.5A, World Wide Input Voltage 100-240VAC 50/60Hz. Charge Mode: CC CV, Not for use with lead-acid batteries, please check the input / output and battery voltage before make order 54.6V Power Rad Battery charger: global applicable AC Input voltage.100% full load aging test, Internal EMI filter, ripple minimum. The precision current between ±0.1A, the voltage tolerance is ±0.1V, absolutely not virtual marking Smart universal power charger: Built-in simply fan, with radiating fin surrounding the board, dissipating the heat through the shell, So some hot on the shell when charging is very normal, but it is durable The Charger protected: The multi-functional electric charger has intelligent protection module, which effectively has the functions of voltage protection/over-current protection/over-temperature protection/short-circuit protection, etc, which can be safe Charge your battery easily. Note: Red Light when charging, Green Light when battery fully charged or broken(UNDER 35.7V) The TANGSPOWER charger is manufactured with high-quality materials and advanced safety features, and made of high-temperature resistant ABS+PC material, which is durable and has a long service life. The plug is made of improved aluminum alloy and pure copper fiber core, and the built-in aluminum heat sink has a good heat dissipation design, which can provide fast and efficient charging, effectively prevent oxidation and rust Package Include: 1 x 54.6V 1.5 Lithium Battery Charger, 1 x Power Cord, To make your batteries last 10X longer, avoid using batteries below 35% and don’t charge above 85-90%
Protections: Certified with over-voltage, over-load, over-current, over-temperature, short circuit protection, fire-resistant casing
LED Display: Red: In charging state, Green: Full Charged
Charge Mode: CC to CV
Input Voltage: 100-240 V 50/60 HZ
Suitable Voltage / Frequency: 90-264 V 47 / 63Hz
Output Voltage: 54.6 V
Output current: 1.5A
Power: 84 W
Prod Fluctuation / Noise: <100MV
Working temperature: 0-40 ℃
Storage Temperature: -20-85℃
Working Nemi: 5% ~ 90% RH
Storage Humidity li ion battery charger: 5% ~ 90% RH
Housing material: PC
Package: 1*charger 1*power cord cable 1*DC adapter
Use and maintenance of the charger :
1. When charging, first connector to the battery, then connect to AC; after full, cut off AC,
then pull the battery plug. If you pull the battery plug first while charging, especially when
the charging current is large (red light), it is very easy to damage the charger.
2. LED display after turning green, then charge for 2-3 hours.
3. Please do not run out of battery power, then charger. Otherwise the battery cannot be
protected or even damaged.
4. long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-
called re-lighting, which is conducive to the activation of long-term immobile material in
the deep part of the battery. Luminous means that riding the controller battery
undervoltage protection action
5. If your battery has not been used for a long time (2-3 months), please charge the battery
before using it. Make sure your battery is not broken.
6.Please use the charger in a dry place in time.
7.When you do not use the charger, do not always connect the power supply.
8.Please confirm your battery, Because it is used to charge the lithium battery.
Do not use the charger on the LiFepo4 battery, otherwise the charger will be got incredibly hot.