SXKJDM Fiberglass Mesh Cloth Roll Woven Roving for Pipe Wrap Around Density 10x10 Multi Size Selection(Size:0.44 * 40m) — Open-Box, 25% Off

Material: Glass fiber silk is an inorganic non -metallic material with excellent performance. It is made of glass ball as raw materials and brushed by high temperature melting. Although it is wire -shaped, it is not burned, high -temperature resistant, and large tensile. It is known as soft steel bars (please note that this product is not self -stick). It is normal to separate slightly on both sides and the end. If you mind, please don't buy it. Features: The fire prevention is not burned. The use temperature is between 20 degrees Celsius and 200 degrees Celsius. It will not be corroded by chemical products, high strength, uniform tension, easy to construct, Don't be afraid of water, not afraid of sun. How to use: This fabric cloth works well for 'stitch and glue' boat-building, wood decking reinforcement and general fabrication. Fiberglass Woven Mat is commonly used reinforcement in composites. The fiberglass mat works best with polyester resin and epoxy. Wide range of uses: The fiberglass cloth is a versatile repair material for use on roofing, showers, sinks, pools, hot tubs, automobiles, boats, surfboard, tubs and more. It works on a variety of surfaces, including metal, fiberglass, and wood. Strong woven cloth is cut with scissors for uniform repairs. Specifications: the weight: 2.1 oz per square meter,Sold by the roll. Size: (17in*131ft) 0.44*40m, (39in*196ft) 1 * 60m, (8.6in*131ft) 0.22*40m. Glass silk cloth can be cut into different sizes to meet different needs.

Special attention: The glass fiber cloth is subject to density, and low density is not poor quality. Please confirm whether the density meets your needs before purchasing.

Instructions:

1. Anti -corrosion: First use the pipeline to remove rust, and use the suitable density fiber cloth and asphalt coating or other products to be applied to the outer layer of the pipeline at the same time. General two or three layers.

2. Insulation: After the anticorrosive pipes are completed, after wrapping with the insulation or the insulation pipe, use a fiber cloth suitable for width and density, wrap it on the outside of the thermal insulation layer and then brush the paint or directly wrap it up.

3. Performance: It will not rot in the ground, and it will not be weathering in the air.

Notice:

1. Due to manual measurement, there may be some errors in size.

2. The products are taken by photographers. Due to the different brands and setting standards of the display, the color differences generated are unavoidable. Please understand.