Starlink Wall Pass Through Kit for RV, RJ45 CAT6 Ethernet Bulkhead Socket — Open-Box, 29% Off

CLEAN HIDDEN CABLE ROUTING: Create a dedicated wall entry for your Starlink Ethernet cable through an RV, camper, trailer, boat or off-grid cabin. Route the cable indoors without leaving a window or door open.

IP68 WEATHER PROTECTION: The waterproof cap, silicone O-ring and rubber gasket help shield the RJ45 connection from rain, dust and outdoor exposure. Close the cap when the port is not in use.

CNC ALUMINUM RJ45 CONNECTION: Built with an aluminum housing and CAT6 female-to-female RJ45 coupler for connecting an outdoor Ethernet cable to an indoor router cable. Starlink equipment and cables are not included.

DUAL INSTALLATION OPTIONS: Supports recessed installation with a 28 mm hole or panel installation with a 33 mm hole. Includes the mounting plate, gasket, O-ring, hex nut and screws. Confirm wall thickness before drilling.

COMPATIBILITY AND PACKAGE: Compatible with verified Starlink Gen 3, Gen 4, Standard 4/4X and Mini Ethernet setups. This package includes one wall pass-through socket and mounting hardware. It is a third-party accessory and is not made by or affiliated with SpaceX.

Package Includes: 1 x Aluminum Barrel RJ45 Bulkhead Socket (with tethered rubber cap) 1 x Square Aluminum Mounting Panel Plate 1 x Soft Rubber Weatherproof Backing Gasket 1 x Silicone Waterproof O-Ring (pre-installed inside the barrel) 1 x Rear Aluminum Hex Screw Locking Nut 6 x High-Grade Stainless Steel Mounting Wood Screws (Note: Starlink dish, router, and original cables are not included). Disclaimer: STARLINK is a registered trademark of SpaceX. This product is a third-party compatible accessory, not an official SpaceX or Starlink product.

Bring Lightning-Fast, Weatherproof Starlink Gen 3 Internet into Your RV, Camper, or Cabin Without Open Windows or Air Leaks! Tired of routing your expensive Starlink Standard V3 cable through a cracked RV window, a sliding door, or a makeshift drill hole? Doing so lets in rain, dust, wind drafts, and elements, while risking severe cable crimping or permanent signal dropouts. The [Hece] Aluminum RJ45 Pass-Through Wall Socket is the ultimate permanent solution. Made of premium CNC-machined anodized aluminum, it provides a secure, weatherproof, and rock-solid bulkhead feedthrough tailored specifically to fit your Starlink Gen 3 ethernet setup. Key Features & Benefits: IP68 Waterproof-In-Use Protection:Unlike cheap waterproof sockets that only seal when closed, our customized barrel features a built-in silicone O-ring. When your Starlink Gen 3 cable is plugged in, the molded cable boot creates a watertight seal. When unplugged, the tethered heavy-duty rubber cap keeps the ports fully protected from torrential rain, snow, and moisture. Robust All-Metal Construction: Precision-engineered from 100% solid CNC-machined aluminum alloy and finished in matte black. It outperforms plastic alternative wall plates by 300% in UV resistance and structural strength, easily withstanding intense highway vibrations and severe weather without warping or cracking. Lossless Gigabit Speeds & PoE Support: Equipped with a high-specification shielded CAT6 RJ45 female-to-female coupler with thickened gold-plated pins. It easily handles high-power PoE (Power over Ethernet) and gigabit speeds with less than 1% signal attenuation—ensuring stable, ultra-low latency internet for off-grid remote work and streaming. Innovative Dual-Installation Design:Choose the perfect mounting style for your setup! Install via Method A (Compact Integrated Fitment) by drilling a 1.18 in (30mm) hole to flush-mount the barrel directly on curved or tight surfaces without the plate. Or use Method B (Flange Mounting with Plate) by drilling a 1.30 in (33mm) hole and securing the square backing plate with the 6 included stainless steel screws for maximum flat-wall stability. Technical Specifications: Material: 100% CNC Anodized Aluminum Alloy (Matte Black) Internal Connector: Shielded RJ45 CAT6 Female-to-Female Coupler Plate Dimensions: 2.36 in x 2.36 in (60 mm x 60 mm) Barrel Thread Diameter: 1.18 in (30 mm) Required Hole Clearance: 1.18 in (30 mm) for Method A; 1.30 in (33 mm) for Method B Environmental Rating: IP68 Weatherproof & Dustproof Temperature Tolerance: -40°F to 180°F Package Includes: 1 x Aluminum Barrel RJ45 Bulkhead Socket (with tethered rubber cap) 1 x Square Aluminum Mounting Panel Plate 1 x Soft Rubber Weatherproof Backing Gasket 1 x Silicone Waterproof O-Ring (pre-installed inside the barrel) 1 x Rear Aluminum Hex Screw Locking Nut 6 x High-Grade Stainless Steel Mounting Wood Screws (Note: Starlink dish, router, and original cables are not included). Disclaimer: STARLINK is a registered trademark of SpaceX. This product is a third-party compatible accessory, not an official SpaceX or Starlink product.