SmallRig HawkLock Quick Release Cage for Sony Alpha 7 Series — Open-Box, 5% Off

Improved Design: 1. Built-in cold shoe mount improved at the upper right corner of the cage allows for attaching devices for DJI Mic 2 or LED Video light. 2. Locating block improved at the side of the cage, with position pin and the 1/4"-20 screw at the bottom, three points locking allows for anti-deflection fixation. 3. A “HawkLock” NATO rail is added at the side, which allows for quick attachment of “HawkLock” accessories such as side handles (ID 4485), top handles (ID 4483). For Sony A7R V / A7 IV / A7S III / A1 / A7R IV / A7 V: SmallRig Cage 3667C is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV, A7 V to protect the camera while offering a wide range of accessory mounts. NOTE: This cage is compatible with the cable clamps for HDMI included in cage kits (ID 4538, 4539) but is not compatible with the cable clamp for HDMI(ID：3000) from cage kits (ID 3668B, 3669C). Multiple Mounting Points: The cage includes 1/4"-20 threaded holes, 3/8"-16 locating holes for ARRI, and a “HawkLock” NATO rail for quick attachment of accessories like side handles (ID 4485) and top handles (ID 4483). A built-in cold shoe mount allows for attaching devices for DJI Mic 2 or lights, while a QD socket at the base accommodates shoulder straps for enhanced portability. The base is also equipped with a magnetic Allen wrench, facilitating quick assembly and disassembly. Three-Point Locking: A side locating block improved, with positioning pin and the 1/4"-20 screw at the bottom of the cage form a three-point locking, allowing for anti-deflection fixation without removing the camera’s eyelet triangles. Three-point locking mechanism ensures secure camera attachment for stable footage. All-Round Protection: Built-in pads to offer all-around protection and prevent scratches. With the cage installed, the camera interface, dials, buttons and changing batteries are not affected. The opening and closing wrench design is added to the position of the battery compartment, which fits the curve of the fuselage more, solves the problem of placing the little finger, and enhances the grip of the fuselage. Built-in Quick Release Plate: The bottom quick release plate for Arca enables seamless transitions between handheld, tripod, and gimbal setups, which is compatible for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro / RS 4 Mini Stabilizer. Also, the bottom quick release plate, paired with the “HawkLock” H38 quick release mount plate for Arca-Swiss(ID 4486), allows for rapid slide-in attachment with an auto-locking mechanism. (Upgraded Version) SMALLRIG Full Cage for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 1 / Alpha 7R IV - 3667B

Key Features:
1. One-piece full cage protects camera
2. A hinged arm at the battery door fits camera curve and enhances grip experience
3. Multiple mounting points: 1/4"-20 threaded holes, 3/8" -16 locating holes for ARRI, cold shoe mounts, NATO rail and QD socket support handles, microphones, LED lights, monitors, etc.
4. Triple-point locking: fixes camera via one bottom locating pin, one 1/4"-20 screw and the one M2.5 screw on the left side
5. Quick release plate for Arca-Swiss on the bottom for quick switching between tripod, stabilizer (for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro) and handheld shooting

SmallRig Full Cage for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 1 / Alpha 7R IV 3667B is designed to provide accessory mounts and protect camera. It locks camera via one bottom locating pin, one 1/4"-20 screw and the one M2.5 screw on the left side. The side lock adapters need to be adjusted the installation direction for fitting different camera types, printed with“A7 IV”is for Alpha 7 IV and Alpha 7R V while printed with “A7S III/A1”is for Alpha 7S III / Alpha 1 / Alpha 7R IV. Built-in all-round protective spacers prevent the camera from being scratched. The cage gives access to interfaces, dials, buttons or battery door. There is a spindle spanner at the battery compartment which fits camera curve and leave room for little finger for comfortable grip. 1/4"-20 threaded holes, 3/8" -16 locating holes for ARRI and cold shoe mounts support top handle 2165C, side handle 2093, monitor mount 2903, microphones, LED lights, monitors, etc. Bottom QD socket support QD shoulder strap. quick release plate for Arca-Swiss at the bottom is compatible for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro, the quick release plate (riser plate) for DJI RS 2/RSC 2 stabilizer for stabilizer shooting, and quick release plate for Arca-Swiss 3154. Optional Cable Clamp for HDMI 3000 works with Alpha 7R V / Alpha 7 IV / Alpha 7S III to protect interfaces and ensure stable signal transmission during filming. Holes on the sides and bottom of the cage allow attaching such accessories as hand strap PAC2456 and shoulder strap PSC2428. Besides, the cage comes with a built-in magnetic spanner that facilitate disassembly and assembly.

Notes:
After fixing the 1/4"-20 screw at the bottom of the cage, remove the anti-deflection pin from the staging hole in the battery compartment position and secure it to the corresponding position.
To use the side lock adapter, please remove the split ring on the left side of the camera first.
Cable Clamp for HDMI 3000 is not compatible with Alpha 1 and Alpha 7R IV cameras and will interfere with the synchro terminal interface when used on Alpha 7R V camera.

Compatibility:
For Sony Alpha 7R V
For Sony Alpha 7 IV
For Sony Alpha 7S III
For Sony Alpha 1
For Sony Alpha 7R IV

In the Box:
1 x Cage

Product Dimensions: 146 x 107.6 x 64.5mm
Package Dimensions: 165 x 155 x 85mm
Product Weight: 180g±5g
Package Weight: 286g±5g
Material(s): Aluminum Alloy, Stainless Steel, Silicone

RELATED PRODUCTS: 3668B, 3669B, 3660, 3666, 3000, 2165C, 2093, 2903B, PAC2456