SLL HUT 16.4ft x 9.45in Giant LED Sheet Roll, 24V 6000K White Flexible Bendable Cuttable Dimmable Paper-Thin Plug-and-Play LED Backlight Board for Stained Glass, Accessory Pack (6000K, 16.4Ft IP20) — Open-Box, 14% Off

【1 Sheet = 10 of Theirs】Super long LED sheet light (L16.4ft x W9.45in), covers a full 12.9 sq ft in one roll. One LED backlighting matt covers the area of 10 standard sheets, eliminating complex wiring, saving time and effort. Daisy-chain up to 2 sheets (about 26 sq ft total) with zero voltage drop. 【6000K Cool White Light, CRI 95+】24V LED sheet features 2,640 high-density SMD 2835 LED chips, delivers 6000K cool white light, reaching 24,000 LM per sheet. CRI 95+ for stunning clarity and eye-comfortable illumination. This large backlit light sheet is fully dimmable. (Requires external dimmer, dimmer not included) 【Slim, Flexible, Cuttable】LED backlight sheet large is thin as paper. Easily bend it to fit countertop corners and curved surfaces without damaging the double-layer FPC board. Cuttable LED sheet can be cut to szie. Each LED chip is trimmable with scissors (20.8mm/0.82in). Please strictly cut along black guide lines. 【With Accessories, No Power Supply】Power supply is not included. One 6000K LED sheet roll consumes 240 watt. So please prepare a 24 V ≥ 300 W power supply. Ships with an accessory pack(5 x power cables, 5 x interconnect cables, 80 x silicone spacers, 80 x screws and 80 x screw shims), and an instruction manual. 【Easy to Power and Connect】20 pairs of built-in screw connectors ensures quick powering and daisy-chain for larger areas. Loosen, insert, retighten, and all done. To prevent voltage drop, please do not connect more than 2 rolls / 32.8 ft (10 m) in one line. 【For Backlighting Wall and Countertop】LED backlight sheets for countertops—ideal for kitchen islands, hotel lobbies, or accent walls, especially for large commercial projects. Usually placed under translucent material such as granite, marble, stained glasses for backlighting design. IP20 non-waterproof only for dry areas. This large rollable DIY LED sheet, UL-listed and 24V-powered, delivers bright 6000K cool white light. Paper-thin, soft, foldable, and cuttable, it’s perfect for backlighting countertops and walls, usually placed behind translucent material like granite, marble, stained glass. Specifications:
Light Color: 6000K Cool White
Sheet Size: 5m(L)X240mm(W)X8mm(H) / 196”(L)X9.45”(W)X0.3”(H)
LED Chip: SMD 2835
LED Quantity: 2640 LED Chips
Input Voltage: DC24V
Working Power: 240W per Sheet
Current: 10A
Cut Unit: 1 LED (0.85"x 0.86")
CRI: 95+
Lumen: 24000LM
Waterproof Rating: IP20
Lifespan: 50,000+hours
Warranty:2 Years
Listing:
1 pc 6000K daylight white LED light sheet (L197 x W9.45 x H0.3 inches)
5 pcs 500 mm long power wires
5 pcs 65 mm long sheet-to-sheet connect wires
80 pcs screws
80 pcs screw shims
80 pcs 8mm high anti-collision silicone bumpers
Please note that power transformer and controller are not included.

Usage and Instructions:
1.Measure the size of the board you want to paste LED backlight sheet on, and determine the size and quantity of LED sheets you need to purchase accordingly.
2.Connect LED sheet lights together by wire or connector
3.Choose right power supply and controller for LED panel sheet.
Principle: The voltage of the power supply should be the same as the voltage of LED sheet. And the driver wattage should be 1.2 times the the total wattage of LED sheets.
For example, when you need to power 2 pieces of 24V 240W LED lighting sheets, the voltage of power supply should the same, also 24V. And the total wattage of 4 pieces 28W LED sheets is 2pcs x 240W=480W. So the wattage of power supply will be 480W x 1.2=576W. (Or a little bit above)
Recommend V1-K dimmer to adjust brightness.
4.Connect power supply and controller to LED light sheet panel, turn them on and ready for use.

Note:
1.Please operate the connection while the power is off.
2.Please make sure that the working environment is clean and dry.
3.Please kindly prepare a 24V power transformer in advance, as it is not included.
4.If you need to adjust brightness of this sheet LED, a dimmer is necessary.
5. To prevent voltage drop, never connect more than 2 sheets 32.8 ft (10 m) in one line.