SIMDOG for iPhone 14 Pro Max Screen Replacement Kit,6.7" Full HD — Open-Box, 47% Off

【Compatibility】: Only compatible with iPhone 14 Pro Max screen replacement . Compatible with model (A2651, A2893, A2896, A2895, A2894), 6.7-inch. Please confirm the phone model before ordering 【Excellent Performance】: SIMDOG used the COF screen encapsulation technology on the iPhone 14 Pro Max screen replacement, which makes the high resolution, high saturation,thinner, lighter screen with narrower bezels and smooth 3D Touch Installation: The Front Camera and Earpiece Speaker housing was pre-installed on iPhone 14 Pro Max screen replacement, you could transfer the original parts to the new screen in a short time ⚠️True Tone: True Tone function needs to be activated by a programmer. ⚠️Warning: Please DISCONNECT the battery flex cable before install the screen to avoid dead screen⚠️⚠️⚠️If there's a non OEM part message pop-up, it will disappear completely after 15 days 【Guide】: You can search "Replace iPhone 14 Pro Max LCD Screen Replacement" on YouTube for a video instruction of how to do the replacement. If you have any issue during the installation or using, please feel free to contact to us

SIMDOG iPhone 14 Pro Max Screen Replacement

Compatibility:

This display is only available on iPhone 14 Pro Max , Model number on the back cover: A2894, A2651, A2893, A2896, A2895. Not compatible with iPhone 13 Pro Max and other models.

Note:

The screen does not include Ear Speaker, Front Camera, Proximity Sensor. Please transfer them from your original display to the new screen.

Package Includes:

1 * iPhone 14 Pro Max LCD Display

1 * Repair Tool Kit

Installation precautions are as follows：

1. Please disconnect the battery flex cable from the device before installing the new screen. Failure to do will result in the screen not turning on.

2. Do not apply pressure to the corners of the LCD panel.

3. The screws are all different lengths, make sure they are reinstalled back into its original location.

4. Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector.

5. Be gentle to the flex cable connectors when removing and installing them. DO not over-bend or use excessive force which can tear the flex cable.

Problem Solution :

If problems occur after installation, for example: cannot turn on, no touch, no home button function, flashing, lines on screen etc.

Please make sure flex cable connectors are properly connected to the logicboard and double check all flex cables is in good condition. Then turn off and on the phone.

180 Days Warranty:

If you receive an item that was damaged during shipping or if you have any problems during use, please contact our customer service team.