SIMDOG for iPhone 13 Screen Replacement Kit 6.1 inch, COF Full HD LCD Display 3D Touch Screen Digitizer Full Assembly + Repair Tools + Screen Protector, Compatibility A2482, A2631, A2634, A2635, A2633

【Compatibility】: Only compatible with iPhone 13 screen replacement . Compatible with model (A2482, A2631, A2634, A2635, A2633), 6.1-inch. Please confirm the phone model before ordering. 【Excellent Performance】: SIMDOG used the COF screen encapsulation technology on the iPhone 13 screen replacement, which makes the high resolution, high saturation,thinner, lighter screen with narrower bezels and smooth 3D Touch. 【Note】: The kit does not include Ear Speaker, Front Camera, Proximity Sensor. Please transfer them from your original display to the new screen. Face ID and 3D Touch functions are fully retained. True Tone functionality is disabled after a screen replacement, or you could activate it by using programmer. 【True Tone】: True Tone function needs to be activated by a programmer. ⚠⚠Warning: Please DISCONNECT the battery flex cable before install the screen and reconnect them last to avoid dead screen. 【Guide】: You can search "Replace iPhone 13 LCD Screen Replacement" on YouTube for a video instruction of how to do the replacement. If you have any issue during the installation or using, please feel free to contact to us.

SIMDOG iPhone 13 Screen Replacement

Compatibility: 

This display is only available on iPhone 13, Model number on the back cover: A2482, A2631, A2634, A2635, A2633. Not compatible with iPhone 12 and other models.

Note: 

The screen does not include Ear Speaker, Front Camera, Proximity Sensor. Please transfer them from your original display to the new screen.

Package Includes:

1 * iPhone 13 LCD Display +1* Repair Tool Kit +1* Tempered Glass Protector +1* Large Clip + Instruction Manual, This tool includes all the equipment to repair the screen. No additional purchase is required.

Installation precautions are as follows：

1. Please disconnect the battery flex cable from the device before installing the new screen. Failure to do will result in the screen not turning on.

2. Do not apply pressure to the corners of the LCD panel.

3. The screws are all different lengths, make sure they are reinstalled back into its original location.

4. Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector.

5. Be gentle to the flex cable connectors when removing and installing them. DO not over-bend or use excessive force which can tear the flex cable.

Problem Solution :

If problems occur after installation, for example: cannot turn on, no touch, no home button function, flashing, lines on screen etc.

Please make sure flex cable connectors are properly connected to the logicboard and double check all flex cables is in good condition. Then turn off and on the phone.

180 Days Warranty:

If you receive an item that was damaged during shipping or if you have any problems during use, please contact our customer service team.