Add to favorites
SCITOO Trailer Hub Kit with Black Paint Idler Hub 4 Lug on 4 L44649 x2 Bearings fit for 2,000 lbs Boat Trailer Wheel Hub
Brand: SCITOO
Condition: Used
$2532
$4398
-43% Save $1866
Updated: 1 hour 54 mins ago
Description
[Vehicle Fitment]- Fits 2000lbs Trailer 1-1/16'' Tapered Axles.Supply excellent support to spindle,reducing friction coefficient of hub,L44649 inner cone bearings,L44649 outer cone bearings. Fit For 2,000 lbs.Wheel Bolt Pattern have 4 Lug on 4 Bolt Pattern. so you can enjoy a quiet and steady driving experience.
[Product Specification]: The bearings and grease seals are pre-assembled and lubricated. This trailer hub [Kit Includes] all the necessary parts for installation,you can directly install them on the trailer axle.★2000lb Trailer Axle hub kit fit 1-1/16" diameter straight spindle,not for tapered spindle.
[Good Packaging]- The trailer spindle bearing kits are wrapped in a sturdy cardboard box with bubble wrap. All parts are placed neatly. The products are protected as much as possible during transportation to Avoid deformation and wear
[Supporting quality standard]: Wheel hub bearings undergo strict inspection for quality,dimensional accuracy,hardness and material,ensuring compliance with original equipment quality standards.
[Attention]:Please select your vehicle (year/make/model/trim) in the top left corner of the page to confirm compatibility or refer to the vehicle information in the description.
Package Quantity:
1x 1" BT8 Round Spindles
1x Hub1x Inner Bearing
1x Outer Bearing
1x d-ust cap
1x Seals
1x Cotter Keys
4x cone wheel lug nuts
1x Tang washer
1x Hexagon Castle nut
Parameter:
L44649 inner cone bearings
L44649 outer cone bearings
4 on 4" Bolt Pattern
Fit For 2,000 lbs
Installation Instructions:
Step 1: Take away the existing d-ust cap, cotter pin, castle nut, washer and hub. Take away any remaining grease from spindle. Inspect For spindle For wear or damage.
Step 2: Slide new hub onto spindle. Using a torque wrench, tighten the new castle nut to 30-40 foot-lbs. Turn hub to ensure proper bearing seating‚ Loosen the castle nut until loose enough to turn the castle nut with you fingers. Re-tighten the castle nut finger tight.
Step 3: Install cotter pin through the hole in the spindle. If the hole is covered by the castle nut, loosen the castle nut to the nearest hole so that the cotter pin can be installed. The hub should rotate freely when spun by hand, and there should be no movement when the hub is pulled back and forth. Bend the legs of the cotter pin to ensure the cotter pin and castle nut will not loosen.
Step 4: Install the d-ust cap with the d-ust cap installation tool. Use a mallet or hammer, only strike the d-ust cap tool and not the d-ust cap(Helpful hint):Place piece of wood over the d-ust cap tool.
Step 5: Start all nuts by hand to prevent cross threading. Tighten the lug nuts in stages. Following the sequence and torque stages per your specific hub and wheel size. Wood block(not supplied)
1x 1" BT8 Round Spindles
1x Hub1x Inner Bearing
1x Outer Bearing
1x d-ust cap
1x Seals
1x Cotter Keys
4x cone wheel lug nuts
1x Tang washer
1x Hexagon Castle nut
Parameter:
L44649 inner cone bearings
L44649 outer cone bearings
4 on 4" Bolt Pattern
Fit For 2,000 lbs
Installation Instructions:
Step 1: Take away the existing d-ust cap, cotter pin, castle nut, washer and hub. Take away any remaining grease from spindle. Inspect For spindle For wear or damage.
Step 2: Slide new hub onto spindle. Using a torque wrench, tighten the new castle nut to 30-40 foot-lbs. Turn hub to ensure proper bearing seating‚ Loosen the castle nut until loose enough to turn the castle nut with you fingers. Re-tighten the castle nut finger tight.
Step 3: Install cotter pin through the hole in the spindle. If the hole is covered by the castle nut, loosen the castle nut to the nearest hole so that the cotter pin can be installed. The hub should rotate freely when spun by hand, and there should be no movement when the hub is pulled back and forth. Bend the legs of the cotter pin to ensure the cotter pin and castle nut will not loosen.
Step 4: Install the d-ust cap with the d-ust cap installation tool. Use a mallet or hammer, only strike the d-ust cap tool and not the d-ust cap(Helpful hint):Place piece of wood over the d-ust cap tool.
Step 5: Start all nuts by hand to prevent cross threading. Tighten the lug nuts in stages. Following the sequence and torque stages per your specific hub and wheel size. Wood block(not supplied)
Sold by
Amazon Warehouse
Official Amazon outlet for open-box & returned items
- Backed by Amazon's A-to-Z Guarantee
- 30-day return policy
- Ships from Amazon fulfillment centers
- Price verified on Amazon
Product Details
- SKU:
- awhd-us-b08jhwtl69
- Model:
- 162313-5206-1505491761
- Country:
- US
- ASIN:
- B08JHWTL69
Shopping Smarter
Common questions about buying open-box and refurbished.
Why buy refurbished or open-box?
Refurbished and open-box products offer the same performance as new at a fraction of the price. You're already saving $19 on this listing. They've been inspected, tested, and are ready to use — the only difference is the price tag. Buying refurbished also reduces electronic waste, extending product life cycles and keeping functional devices out of landfills.
What's the difference between open-box and refurbished?
Open-box products are customer returns that have been inspected and confirmed functional. They may show little to no use — often the item was returned simply because the buyer changed their mind. Refurbished products have been professionally repaired or restored by technicians, tested to meet or exceed manufacturer specifications, and sometimes come with a warranty. Both are a smart alternative to buying new.
Why use OpenBoxFox?
Finding refurbished deals is time-consuming — you'd have to check Amazon Warehouse, Reebelo, Dyson Outlet, and others separately for SCITOO products. OpenBoxFox aggregates these listings in one place, so you can compare and find the best deal without the legwork. We update pricing daily so you always see current availability and real savings.
Is it safe to buy refurbished?
Yes. Products listed on OpenBoxFox come from established retailers like Amazon, Reebelo, and Dyson — not unknown third-party sellers. Each retailer has buyer protection policies, return windows, and in some cases warranties. You get the price advantage of used goods with the purchase security of a known retailer.