RGBZONE 3 Pin 10mm LED Connector Kit with 32.8ft 3 Pin Extension Cable and 10 Pcs 3 Pin LED Strip to Wire Connectors for 10mm IP20/IP65 SMD 5050 Dream Color LED Strip Light WS2811 WS2812B — Open-Box, 15% Off

What You Get: 𝟭𝟬𝗽𝗰𝘀 𝟯𝗽𝗶𝗻 𝟭𝟬𝗺𝗺 𝗹𝗲𝗱 𝘀𝘁𝗿𝗶𝗽 𝘁𝗼 𝘄𝗶𝗿𝗲 𝗰𝗼𝗻𝗻𝗲𝗰𝘁𝗼𝗿𝘀 and 1 bundle 32.8ft 22awg 3pin LED extension cable. Compatible Light Strips: This 3-pin 10mm led connector only works for 10mm IP20/IP65 SMD 5050 dream color LED strip light (not for IP67). Please make sure that your SMD LED strip has 3 solder joints and the distance between two adjacent solder joints is less than 4.0mm, otherwise they are not suitable for your LED strip! It's not suitable for Govee outdoor lights and 8mm LED strips. Perfect Kit: When your light strip has a certain distance from your power, when you don't need the distance of the light strip, these cables and connectors will help you solve these embarrassing distance perfectly. Premium Material: The 3 wire led cable is made of multi copper core who are wrapped in upgraded PVC,high conductivity , low resistance and anticorrosive; LED connectors are made of PC material , durable,transparent and beautiful. Warm Tips: Please connect the 3 contacts of the connector to the 3 contacts of the light bar to ensure a valid connection, and ensure that the positive and negative directions of the LED strip lights are correct.

Package Content :10Pcs 3pin led connectors and 1 bundle 32.8ft(10M) 3pin extension wire

Connectors Specification:

Rated Voltage: 0-36V

Rated Current: 0-5A

Interface type: 3pin

Working PCB Width: 10mm

Working Environment Temperature: -10~45℃

Extension Wire Specification:

Interface Type:3 pin

External Material : PVC plastic

Interal Material: copper

Rated Temperature：80℃

Rated Voltage:0-300V

Rated Current:0-2A

Installation Tips:

1. Cut the strips and wires to the length you need, and then fully open the clamp.

2. Push the strap in until it touches the backing, let the pins touch the connector, and then press down firmly to make sure the pins pierce the strap. (You can use tools such as pliers)

3. Push the wire into the wire end of the connector, and then press it down firmly to ensure that the pin pierces the wire sheath. (You can use pliers and other tools)

4. Reminder: 1. Please make sure that the contact point of the light strip is in contact with the copper sheet of the buckle; 2. When connecting the light strip, there is no need to peel off the adhesive on the back of the light strip