Reliable Cable 5-Port MoCA Cable TV Modem Splitter Signal Booster/Amplifier Kit with Active Return (NOT Recommended for use with Antenna Systems (OTA) and Will NOT Work with Satellite Systems)

Provides 4 amplified output ports with Active Return for use with broadband cable TV services including cable modems. All ports are LOSSLESS both forward and reverse. This is a true lossless 4-port splitter. NOT recommended for use with OTA Antennas, use a PASSIVE Return amplifier instead. NOT compatible with satellite systems.

This product is MoCA capable and supports MoCA networks at 1125-1525MHz. MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services.

6 kV surge protection for protection against lightning strikes. The powder coated housing provides excellent corrosion resistant protection against salt fog and rust. PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times.

This kit includes a 3' super flexible connection cable, instructions, two F59 termination caps for unused ports, and either a 15V=500 or a 13.2V=500 power supply. Connection cable is for POWER connection only, NOT for signal connection.

Using this product with a cable modem may provide more stable connections. A more stable broadband connection will generally provide better streaming and data throughput performance. You don't need to have a MoCA network to use this amplifier. It will work great as a normal cable TV or OTA signal amplifier.

The PCT-VC-F14-AN1 amplifier provides complete amplification and home networking support in one package. First, the F14A is designed to amplify your incoming cable (or antenna) signal and distribute it to up to FOUR separate locations. It takes the incoming signal, boosts it about 7x, and then outputs that same signal to all of the output ports (except the MODEM/Bypass port). This provides you with a strong coaxial signal to all of your locations in your home. The PCT VC-F14A supports all cable and OTA TV signals, and provides a MODEM port which is active even during system or power failure - to provide a signal to your cable modem or other communications device. In addition, the F14A supports MoCA (Media over Coaxial Alliance) signals, which operate outside the normal TV range (1125 to 1525 MHz). A MoCA network uses coaxial cables—like the cords that screw into the back of your TV—to connect your modem to the internet. Since most homes only have one or two Ethernet ports, utilizing the coaxial cables (traditionally used to connect your television to set-top boxes and cable TV in each room) gives you more options to connect to wired internet throughout the house. The PCT VC-F14A supports the transmission of MoCA signals over your existing coax cable, while also blocking those signals from leaving your home - through the use of a MoCA blocking filter on the INPUT of the amplifier. PCT amplifiers have precision machined F ports (conforms to SCTE standards) with beryllium copper seizure mechanisms to provide optimal distribution and amplification of your RF signals. You don't need to be using MoCA to take advantage of the great performance and quality of PCT broadband amplifiers.