Raycity 3"H Shower Threshold Water Dam, Shower Water Guard (59 inch, Grey) — Open-Box, 18% Off

Perfect Shower Barrier : Raycity frameless bathroom water dam have four colors for you to choose from (white, black, gray, transparent)，shower water dam measures 0.5 inches wide, and 3 inches high, we offer five sizes for you to choose from 39", 67", 74", 98" and 118", the shower threshold height is 3 inches, effectively blocking water from entering. providing complete protection against water over flow. Versatile Water Stopper : Raycity shower water barrier can be used anywhere water needs to bewet and dry separation, such as bathrooms, tubs, washers, kitchens, stoves, and water heaters on concrete floors. Set a perfect barrier to prevent water from over flowing. Easy to Install : Whower water splash guard can be installed by tearing off the adhesive strip on the back. for better stop water flow leak guard and firmness, we suggest seal the bottom edge after gluing with clear silicone caulk, which can also extend its service life. Safe-Flexible Material : Silicone shower dam is made of 100% rubber, which is safe, collapsible, durable, and heat-resistant. It can be stepped on and bent, as well as wheelchair-accessible shower thresholds. 100% After-Sales Service: Raycity are dedicated to providing you with the best possible experience. Contact us with any questions or concerns and we'll respond within 24 hours.

Raycity Silicone Shower Threshold Water Strip Dam and retention system keeps water inside the threshold. available in five size 39"/59"/67"/74"/96"/118" .

shower water guard strip  sticky adhesive strip adheres to almost any smooth surface, including walls, windowsills, door gaps, floors, tiles, etc.is a great molding strip for modern kitchens.

Package Includes：1 x shower water dam

Specifications:

• Material: Silicone
• Color:Black
• Height: 3 Inches 
• width: 1.38 Inches

Feature: 

• The long and flexible design can be cut into various shapes at will.
• Ideal for curbless showers and other areas where water needs to be contained. 

How to use:

1.  Wipe off the water on the ground, keep it dry and dusty

2. Determining the position of the water retaining strip and mark it with a pen on the ground. 

3. Remove the adhesive and install the water barrier in the marked position. 

4. Seal the rubber strip at the position where the two ends of the water retaining strip are in contact with the wall. 

5. Apply glue on both sides of the water stopper and apply evenly. 

6. Allow to dry and no contact with water in at least 24 hours.

Notice：

1. In corners, we recommend 45-degree splicing installation.

2. For better stickiness, heat the glue on the bottom of the weather strip with a hair dryer.