Add to favorites
QPKING CT400 Fuel Injector Cleaner Tester, 6-Cylinder GDI EFI FSI PIEZO — Open-Box, 30% Off
Brand: QPKING
Condition: Used
$34767
$49900
-30% Save $15133
Updated: 9 days ago
Description
🚙 SIX-INJECTOR CLEANING AND TESTING - Clean or test up to six compatible gasoline injectors in one setup. Six 110ml measuring cylinders help technicians compare spray patterns, leakage and output side by side before service or replacement.
🚙 12 CLEANING AND TEST FUNCTIONS - Combines 28kHz, 70W ultrasonic cleaning with idle-speed, medium-speed, high-speed, acceleration, variable-speed, leakage, spray-volume, reverse-flush and related diagnostic procedures.
🚙 ADJUSTABLE TEST CONTROL - Set 0-7500 RPM, 0-9900 injection cycles, 0-20.0ms PWM pulse width, 0-0.55MPa pressure and 0-10 minute timing to simulate different operating conditions and compare injector performance.
🚙 MULTI-VOLTAGE INJECTOR DRIVE - Select 12V, 70V or 120V for compatible standard, GDI, EFI, FSI and PIEZO gasoline injectors. Confirm injector voltage, connector type, adapter fit and required test pressure before purchase.
🚙 110V WORKSHOP MACHINE - The main unit measures 13.19 x 12.80 x 13.78 inches and weighs approximately 36.6lb. Use dedicated injector test fluid and suitable ultrasonic cleaning fluid; never use gasoline or operate the ultrasonic tank without fluid. Not for common-rail diesel injector testing.
The QPKING CT400 is a professional bench-top fuel injector cleaner and tester designed for automotive repair shops, injector service businesses and experienced technicians. It can operate up to six compatible gasoline injectors at the same time, allowing users to compare spray patterns, leakage and measured output across six 110ml measuring cylinders.
The machine combines 28kHz, 70W ultrasonic cleaning with multiple injector testing procedures. Available functions include idle-speed, medium-speed, high-speed, acceleration, variable-speed, leakage, spray-volume, reverse-flush and related diagnostic modes. The ultrasonic system helps loosen deposits before flow, leakage and spray-pattern testing.
Adjustable controls support test speeds from 0 to 7500 RPM, injection counts from 0 to 9900 cycles, PWM pulse widths from 0 to 20.0ms, system pressure from 0 to 0.55MPa and operating times from 0 to 10 minutes. These settings allow technicians to simulate different operating conditions and compare injector performance before service or replacement.
The CT400 supports selected standard, GDI, EFI, FSI and PIEZO gasoline injectors when used with compatible connectors and adapters. Injector requirements vary by manufacturer and application. Before purchase, confirm the injector type, drive voltage, connector, adapter dimensions and required test pressure. This machine is not designed as a common-rail diesel injector test bench.
The US version operates on 110V, 50–60Hz power. The main unit measures approximately 13.19 x 12.80 x 13.78 inches and weighs approximately 36.6lb. Its recommended operating environment is 32°F to 104°F with relative humidity below 85%.
Use dedicated injector test fluid in the testing circuit and suitable ultrasonic cleaning fluid in the cleaning area. Do not use gasoline or corrosive liquids, and never operate the ultrasonic system without fluid. Review the included adapter list before purchase to make sure the machine matches the injectors you plan to service.
Frequently Asked Questions:
Can the CT400 test GDI injectors? It supports selected compatible GDI gasoline injectors after the correct voltage, connector and adapter have been confirmed.
Can it test one injector? A compatible single injector can be tested when all unused outlets are properly sealed.
Is it suitable for diesel common-rail injectors? No. The CT400 is intended for selected compatible gasoline injectors.
What is the maximum test pressure? The adjustable system pressure is 0 to 0.55MPa, approximately 0 to 79.8 PSI.
What fluids should be used? Use dedicated injector test fluid for testing and suitable ultrasonic cleaning fluid for cleaning. Do not use gasoline.
The QPKING CT400 is a professional bench-top fuel injector cleaner and tester designed for automotive repair shops, injector service businesses and experienced technicians. It can operate up to six compatible gasoline injectors at the same time, allowing users to compare spray patterns, leakage and measured output across six 110ml measuring cylinders.
The machine combines 28kHz, 70W ultrasonic cleaning with multiple injector testing procedures. Available functions include idle-speed, medium-speed, high-speed, acceleration, variable-speed, leakage, spray-volume, reverse-flush and related diagnostic modes. The ultrasonic system helps loosen deposits before flow, leakage and spray-pattern testing.
Adjustable controls support test speeds from 0 to 7500 RPM, injection counts from 0 to 9900 cycles, PWM pulse widths from 0 to 20.0ms, system pressure from 0 to 0.55MPa and operating times from 0 to 10 minutes. These settings allow technicians to simulate different operating conditions and compare injector performance before service or replacement.
The CT400 supports selected standard, GDI, EFI, FSI and PIEZO gasoline injectors when used with compatible connectors and adapters. Injector requirements vary by manufacturer and application. Before purchase, confirm the injector type, drive voltage, connector, adapter dimensions and required test pressure. This machine is not designed as a common-rail diesel injector test bench.
The US version operates on 110V, 50–60Hz power. The main unit measures approximately 13.19 x 12.80 x 13.78 inches and weighs approximately 36.6lb. Its recommended operating environment is 32°F to 104°F with relative humidity below 85%.
Use dedicated injector test fluid in the testing circuit and suitable ultrasonic cleaning fluid in the cleaning area. Do not use gasoline or corrosive liquids, and never operate the ultrasonic system without fluid. Review the included adapter list before purchase to make sure the machine matches the injectors you plan to service.
Frequently Asked Questions:
Can the CT400 test GDI injectors? It supports selected compatible GDI gasoline injectors after the correct voltage, connector and adapter have been confirmed.
Can it test one injector? A compatible single injector can be tested when all unused outlets are properly sealed.
Is it suitable for diesel common-rail injectors? No. The CT400 is intended for selected compatible gasoline injectors.
What is the maximum test pressure? The adjustable system pressure is 0 to 0.55MPa, approximately 0 to 79.8 PSI.
What fluids should be used? Use dedicated injector test fluid for testing and suitable ultrasonic cleaning fluid for cleaning. Do not use gasoline.
Sold by
Amazon Warehouse
Official Amazon outlet for open-box & returned items
- Backed by Amazon's A-to-Z Guarantee
- 30-day return policy
- Ships from Amazon fulfillment centers
- Price verified on Amazon
Product Details
- SKU:
- awhd-us-b09n3jt2bs
- Model:
- CT400
- Country:
- US
- ASIN:
- B09N3JT2BS
Shopping Smarter
Common questions about buying open-box and refurbished.
Why buy refurbished or open-box?
Refurbished and open-box products offer the same performance as new at a fraction of the price. You're already saving $151 on this listing. They've been inspected, tested, and are ready to use — the only difference is the price tag. Buying refurbished also reduces electronic waste, extending product life cycles and keeping functional devices out of landfills.
What's the difference between open-box and refurbished?
Open-box products are customer returns that have been inspected and confirmed functional. They may show little to no use — often the item was returned simply because the buyer changed their mind. Refurbished products have been professionally repaired or restored by technicians, tested to meet or exceed manufacturer specifications, and sometimes come with a warranty. Both are a smart alternative to buying new.
Why use OpenBoxFox?
Finding refurbished deals is time-consuming — you'd have to check Amazon Warehouse, Reebelo, Dyson Outlet, and others separately for QPKING products. OpenBoxFox aggregates these listings in one place, so you can compare and find the best deal without the legwork. We update pricing daily so you always see current availability and real savings.
Is it safe to buy refurbished?
Yes. Products listed on OpenBoxFox come from established retailers like Amazon, Reebelo, and Dyson — not unknown third-party sellers. Each retailer has buyer protection policies, return windows, and in some cases warranties. You get the price advantage of used goods with the purchase security of a known retailer.













