PAC HDK001X Harley-Davidson Motorcycle (1998-2013) Complete Radio Replacement Interface with Dash Kit, Retains Handle Bar Audio Controls, Pre-Wired Stereo Installation Harness, UV Protective Cover

𝗗𝗶𝗿𝗲𝗰𝘁-𝗙𝗶𝘁 𝗳𝗼𝗿 𝗛𝗮𝗿𝗹𝗲𝘆-𝗗𝗮𝘃𝗶𝗱𝘀𝗼𝗻: Engineered specifically for 1998-2013 FL models with factory fairings.

𝗥𝗲𝘁𝗮𝗶𝗻𝘀 𝗙𝗮𝗰𝘁𝗼𝗿𝘆 𝗛𝗮𝗻𝗱𝗹𝗲-𝗕𝗮𝗿 𝗖𝗼𝗻𝘁𝗿𝗼𝗹𝘀 – 𝗦𝗲𝗮𝗺𝗹𝗲𝘀𝘀 𝗢𝗘𝗠 𝗜𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗶𝗼𝗻: Pre-programmed interface allows you to keep your original handlebar audio controls for convenient, OEM-style operation while upgrading your radio.

𝗠𝘂𝗹𝘁𝗶𝗽𝗹𝗲 𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻 𝗢𝗽𝘁𝗶𝗼𝗻𝘀 – 𝗖𝘂𝘀𝘁𝗼𝗺𝗶𝘇𝗲𝗱 𝗧𝗼 𝗬𝗼𝘂𝗿 𝗦𝘁𝘆𝗹𝗲: Includes two interchangeable faceplate frame options, allowing you to choose the look and finish that best matches your motorcycle and installation preference.

𝗛𝗶𝗻𝗴𝗲𝗱, 𝗧𝗶𝗻𝘁𝗲𝗱 𝗨𝗩 𝗣𝗿𝗼𝘁𝗲𝗰𝘁𝗶𝘃𝗲 𝗖𝗼𝘃𝗲𝗿: Optional tinted splash guard helps shield your radio from moisture, dust, and harmful UV exposure while maintaining a clean, low-profile appearance.

𝗛𝗲𝗮𝘃𝘆-𝗗𝘂𝘁𝘆 𝗖𝗼𝗺𝗽𝗼𝗻𝗲𝗻𝘁𝘀 – 𝗕𝘂𝗶𝗹𝘁 𝗳𝗼𝗿 𝗧𝗵𝗲 𝗥𝗼𝗮𝗱: Weather-resistant construction stands up to vibration, heat, and harsh riding conditions.

𝗣𝗹𝘂𝗴-𝗮𝗻𝗱-𝗣𝗹𝗮𝘆 – 𝗡𝗼 𝗠𝗼𝗱𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 𝗥𝗲𝗾𝘂𝗶𝗿𝗲𝗱: Install quickly and easily without cutting, splicing, or extra wiring. Perfect for both DIY riders and professional installers.

*𝗜𝗠𝗣𝗢𝗥𝗧𝗔𝗡𝗧: (1) Does not retain rear speakers (these will need to be hard wired). (2) The aftermarket radio MUST be equipped with a wired remote input (3.5mm headphone style jack or Blue/Yellow wire) to be compatible (ex. a port or wire on the back of the radio labeled W/R, REM, Wired Remote, Remote, Rem Cont etc.). If the radio does not have a wired remote input then you will need to use the SWI-X.

*𝗖𝗢𝗠𝗣𝗔𝗧𝗜𝗕𝗜𝗟𝗜𝗧𝗬 𝗡𝗢𝗧𝗘𝗦: (1) Not compatible with any Sony XAV series head unit. These models must be used with SWI-CP2 or SWI-CP5. (2) Not compatible with Alpine models: UTE-73BT, CDE-172BT, CDE-173BT and CDE175BT. These must be used with the SWI-CP2 or SWI-CP5. (3) Not compatible with Kenwood models: KDC-X598, KDC-BT318U, KDCBT-758-HD, KDCBT-558U & KDC-X798. These models must be used with the SWI-CP2 or SWI-CP5. (4) Clarion model CZ500 does not support remote Bluetooth controls. (5) JVC model numbers KW-NT1 and KW-NT3HDT do not support Presets Up and Down from steering wheel controls.

(6) Pioneer AVIC-Fxxx radios do not interpret radio preset seeking commands. This is a limitation of the radio not the SWI-RC. There is no correction for this unless it comes from Pioneer. (7) Pioneer radios with Bluetooth feature, the steering wheel controls will not adjust the phone call volume. The phone call volume must be adjusted on the face of the radio. This is a limitation of the radio not the SWI-RC. There is no correction for this unless it comes from Pioneer. (8) Only the AVIC-Z110BT, Z120BT, Z130BT, Z140BH and the AVIC-X920BT, X930BT, X940BT will support the Voice Recognition function via wired remote input.