Oyviny Plug & Play USCAR 7 Pin to 4 Pin Trailer Wiring Harness Universal for LED Tailgate Light Bars, Pure Copper USCAR to 4 Flat Trailer Extension Wiring Adapter for Trailers, Trucks, Pickups — Open-Box, 23% Off

Note: Only compatible with vehicles with Factory Tow Package, Make sure your truck equips with USCAR 7 pin socket Note: If your truck has rear parking assist or trailer detection system, when you use the 4-prong trailer extension for something such as a LED tailgate or light bar then the vehicle will detect them as a trailer and will disable the blind spot radar detection and backup assist Multi-Function USCAR Wiring Harness: USCAR 4 Way Trailer Wiring Harness plugs into existing USCAR connector on your vehicle, provides a 4-way flat socket while retaining use of the existing OEM 7-way connector Used for Tailgate Light Bar: USCAR 7 way to 4 way trailer wiring great for providing a 4-prong trailer connector to install a light bar under the tailgate, Plug and play straightforward installation, no need to cut wires Standard 4 Way Connector: USCAR 7 pin tailgate light wiring harness ties your trailer's electrical system into the vehicle's Brake Light, Turn Signal Light and Taillights; 4-pin trailer wiring is widely used in most trailers, adding versatile towing options Wide Application: This USCAR trailer T harness is designed to be a custom wiring option for a variety of vehicles, compatible with many vehicles with factory USCAR 7 way trailer tow wiring, for GMC, Dodge Ram, Ford, Toyota Tacoma/Tundra, Jeep etc Durable Construction: 16AWG pure copper wire makes reliable connection, 41 inches length USCRA wiring harness was well protected by a black slit loom; All 7 way USCAR plugs and 4 way connector are made from durable black plastic for long-lasting use

Introduction:

Just unplug the factory 7 pin connector from the factory holder, place the female 7 pin connector into the factory holder. Plug the factory 7 pin connector into the male 7 pin connector. Then the flat 4 pin connector is used to connect connect trailer taillights, brake lights and turn signals.

Installation:
1. Locate the vehicle's factory 7-way attached on the driers side near the hitch.
2. Separate the vehicles connector from the back side of the facory 7 way. Take care not to damage the locking tabs.
3. Insert the T-connector end between the separated connectors. Make sure the connectors are fully inserted with locking tabs in place.
4. Route the 4-flat to the center of the vehicle and secure in a safe out of the way location using the cable ties provided. Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into 7-way OEM tow package wiring harness - no cutting, splicing or tapping required.