OURU PEX Crimping Tool for Copper Rings 1/2" & 3/4", with Rings and Cutter — Open-Box, 14% Off

2-in-1 Jaw Design: This set includes a PEX crimping tool, a pipe cutter, 20 pcs of 1/2-inch copper rings, and 10 pcs of 3/4-inch copper rings. Designed for 1/2-inch and 3/4-inch copper crimp rings, the crimping tool features a 2-in-1 jaw design that handles both common sizes with one tool. No jaw changes needed, making your work faster and more efficient.

High-Strength Jaws: Made of 65Mn steel, the jaws apply even pressure during crimping to help the copper ring compress more evenly around the pipe. The polished jaw surface helps reduce scratches and deformation on the ring, which helps create a tighter seal and lowers the risk of leaks.

Adjustable Crimping Force: The adjustment dial allows you to control crimping force based on your needs. A higher number means greater crimping force. The tool is pre-calibrated before leaving the factory, and the included Go/No-Go gauge helps you make further adjustments when needed.

Meets ASTM F1807 Standard: This PEX crimping tool meets ASTM F1807 standards and is designed for use with PEX-B tubing, copper crimp rings, and PEX fittings made to the same standard. It helps create proper crimps, improve sealing performance, and reduce the risk of loose connections or leaks after installation.

Easy To Use: Simply cut the pipe with a pipe cutter, place the copper crimp ring on the pipe, crimp it with the tool, and then check the crimping result with the included gauge. If the crimp passes the “Go” test, the connection is properly secured. If it falls into the “No-Go” range, please adjust the crimping force and crimp again.

OURU 1/2" and 3/4" PEX crimp tool features a dual-size combo jaw design crafted from high-quality 65Mn steel, delivering both durability and precision with polished jaws that prevent ring damage and ensure leak-free crimps. Equipped with a dial, the crimping force can be adjusted according to actual needs to obtain accurate crimping. Designed and manufactured to meet ASTM F1807 standards, it guarantees full compatibility with standard copper rings and PEX fittings. Simple to use—just cut the pipe, slide on the ring, crimp, and verify with the Go/No-Go gauge—making every connection safe, reliable, and worry-free.