OBD2 to USB C Power Cable for Dash Cam,OBD Adapter Hardwire Kit Tpye-c with Low Voltage Protection(Auto-Cutoff 11.6V/23.4V), 24/7 Parking Mode,ACC Detection,Plus & Play Constant Power Cable (11.5FT) — Open-Box, 19% Off

Smart Dual Modes with Selector Switch : Mode 【0】：ACC Mode, The type c dash cam hardwire kit auto powers cut off 20 minutes after engine shut-off（(in some cases 20-30 minutes or more) depending on the vehicle's OBD system logic）, preventing battery drain and achieving an ideal balance between convenience and vehicle safety.

Mode 【-】：24/7 Parking Surveillance，When your car is off, the dash cam power cord provides continuous power, It cuts power 5 minutes after detecting a low battery voltage (11.6V for 12V or 23.4V for 24V vehicles), enabling 24/7 anti-theft monitoring while protecting your battery.

Low Voltage Protection【11.6V/23.4V Auto-Cutoff】: This ACC hard wire kit prevents a dead battery by automatically cutting power at 11.6V (12V vehicles) or 23.4V (24V vehicles). This crucial feature prevents complete discharge while preserving sufficient charge for a smooth start—even after long-term parking.

Stable 5V/3A Power Output : The hardwire kit for dash camera ends restarts and video lag, shields the mainboard from ignition surges, and records post-parking incidents (scratches, collisions) with a 5-minute delay-off, helping to ensure 24 hours evidence recording.

6-in-1 Circuit Protection System: ACC detection hardwire kit features six key safeguards—Low Voltage Cut-off,Anti-Drain Protection,Over-Current,Short-Circuit,Reverse Polarity and Overheat Protection—to reliably protect both your dash cam and vehicle's electronics."

Direct OBD Power & Data Safety : The hardwire charger taps power directly from your OBD2 port, freeing up your 12V socket. It supports continuous recording with auto shut-off, all while drawing only power and ensuring total data isolation from your vehicle's ECU.

Universal Compatibility : This 3.5-meter (11.5-ft) OBD extension 24-hour parking monitoring cable fits 12V/24V vehicles—including cars, SUVs, trucks and big rigs—and works with almost all Type-C dash cams.Designed for A5-B5 pin definition,NOT compatible with A8-B8 pins or 12V input.

Play and Plug ,Easy Installation : Skip complex wiring. Just plug OBD power adapter into your OBD-II port—no tools, no drilling! Get your dash cam running in under 3 minutes for a clean, hidden wiring. Easy for beginners.

Friendly Note : Some vehicles cut OBD-ii port power when turned off—this is the manufacturer’s design, not an issue with the OBD Charger cable. If it fails to power your device after startup, drive to 20 km/h (12 mph) to activate it (some models don’t supply power instantly).

OBD2 Dash Cam Power Adapter: Plug & Play, Safe & Stable Power Solution Upgrade your dash cam with our all-in-one OBD2 power adapter. Designed for 12V/24V vehicles, it delivers hassle-free installation and reliable performance for 24/7 protection. 【Key Features & Benefits】 True Plug & Play: No wiring, tools, or drilling! Plug directly into your OBD-II port to free up the 12V socket and get powered up in under 3 minutes—ideal for a clean, hidden setup. Stable 5V/3A Power & Data Safety: Eliminates dash cam restarts and video lag. Shields your device from ignition surges and draws power only, with zero access to your vehicle's ECU or data. Smart Low Voltage Protection (11.6V Cutoff): Automatically cuts power to prevent a dead battery, preserving enough charge for a smooth start—even after long-term parking. Dual-Mode Operation: Use the selector switch for ACC Mode (daily driving) or Surveillance Mode (24/7 parking monitoring with 5-minute delay-off to capture incidents). Wide Compatibility: Works with most 12V/24V vehicles (standard OBD2 ports) and dash cams with a USB-C input (requires A5-B5 pin definition).