O’SKOOL Foldable Benchtop Trim Router Table with Adjustable Stand — Open-Box, 14% Off

Foldable Storage And Three Preset Heights : The X-frame legs fold beneath the tabletop, while the built-in handle helps carry the table between storage and the workbench. Folded dimensions: 18.5" x 27" x 1.98". Tabletop size: 18.5"W x 15.94"D x 1"H. Overall benchtop dimensions: 18.5"W x 18.75"D, with preset heights of 13.6", 14.8", and 15.6"

Check Router Fit Before Purchase : The insert plate includes pre-drilled mounting patterns for Makita RT0701C; Porter-Cable PCE6435 and 450; Bosch GKF125CEN, PR110, PR10E, and PR20EVS; DeWalt 611 Plunge and 611 Fixed; and Ridgid R2401. Models not listed are not confirmed compatible

Removable, Level-Adjustable Insert Plate : Four leveling screws help set the plate flush with the router table top, while the locking cams secure it before use for a more consistent tabletop routing setup

Fence-Guided And Bearing-Guided Routing : Use the aluminum fence with MDF faces for guided edge routing, or install the included start pin for bearing-guided work without the fence. The dust port has a 2-1/2-inch outside diameter

Complete Router Table System : Includes the tabletop, foldable stand, fence, insert plate, bit guard, dust port, start pin, and mounting hardware. A standard 3/4" x 3/8" (19 x 9.5 mm) aluminum T-track accepts an optional matching miter gauge. Router, miter gauge, clamps, dust hose, bits, and push block are not included

Includes: (1) Router Table with foldable table legs, (1) Fence with MDF sub-faces, (1) Insert Plate, (1) Bit guard, (1) Dust port

The O’SKOOL RTS10 is a foldable benchtop trim router table designed for tabletop routing in workshops where storage space matters. Its steel X-frame stand folds beneath the tabletop between projects and provides three preset tabletop heights—13.6, 14.8, and 15.6 inches—to suit different benchtop setups.A removable insert plate mounts select trim router models beneath the router table top. Four leveling screws help align the plate with the tabletop, while locking cams secure it before operation. Pre-drilled mounting patterns are provided for Makita RT0701C; Porter-Cable PCE6435 and 450; Bosch GKF125CEN, PR110, PR10E, and PR20EVS; DeWalt 611 Plunge and 611 Fixed; and Ridgid R2401. Models not listed are not confirmed compatible.For guided edge routing, the extruded-aluminum fence uses two MDF face plates and includes an adjustable bit guard and a dust port with a 2-1/2-inch outside diameter. For bearing-guided routing without the fence, install the included start pin as directed in the manual. A 3/4" x 3/8" (19 x 9.5 mm) aluminum T-track accepts an optional matching miter gauge.The system includes the tabletop, foldable router table stand, fence, removable insert plate, bit guard, dust port, start pin, and mounting hardware. Router, miter gauge, clamps, dust hose, router bits, and push block are not included. Before routing, secure all four mounting feet to a suitable work surface, confirm the insert plate is level and locked, disconnect power before adjustments, and verify that your router model matches the compatibility chart.