NEWHOW Ignition Coil 300-8M0077471 3-Pack 12V for Mercury Optimax — Open-Box, 19% Off
Brand: NEWHOW
Description
FITMENT - Three 12V ECM-driven smart coils for Mercury/Mariner OptiMax DFI 75/80/90/115/125 and 200/225/250, EFI 30/40/50/60, 2.5L and 3.0L EFI 150-250, Pro XS. 3 coils = full set for 3-cyl OptiMax. EFI/DFI only. Verify old stamp and serial.
REPLACES - Each replaces Mercury 300-8M0077471, 8M0077471, 339-8M0077471 and prior chain 879984T01, 879984T00, 879984A1, 300-879984T01. Crosses Sierra 18-5158, CDI 184-0003. NEWHOW is an independent aftermarket brand, not genuine Mercury.
BUILD - Per coil: 12V, 2-pin ECM control plug, one high-tension tower, epoxy-sealed housing, internal IGBT driver fired by ECU dwell. Primary approx 0.5-1.0 ohm, secondary approx 5-15k ohm - verify against manual. 3 coils per pack.
FUNCTION - Restores spark to one cylinder on EFI and DFI engines. Fixes single-cylinder misfire codes P0301-P0303, alarm beeping at idle, hard cold starting, and power loss above 3500 rpm. Do not swap coils between cylinders on DFI engines.
INSTALL - Disconnect negative battery, unplug 2-pin, remove the 5 mm bolt per coil, lift old coil, seat new coil, torque to manufacturer spec, reconnect, apply dielectric grease to the tower before fitting the boot. Confirm 2-pin and one tower.
The NEWHOW 3-Pack Ignition Coil 300-8M0077471 is an independent aftermarket set of three 12V ECM-driven smart ignition coils for Mercury, Mariner, Quicksilver and MerCruiser engines. It is not a genuine Mercury or Quicksilver part. Each coil replaces Mercury 300-8M0077471, 8M0077471 and 339-8M0077471 and the prior chain 879984T01, 879984T00, 879984A1 and 300-879984T01, and crosses aftermarket references Sierra 18-5158, CDI 184-0003 and Recmar REC300-8M0077471 for identification only. Specifications per coil: 12V, two-pin ECM control plug, one high-tension tower, epoxy-sealed housing with an internal IGBT driver fired by ECU dwell, with primary resistance around 0.5-1.0 ohm and secondary around 5-15k ohm that should be verified against your service manual. This is a smart coil, not a CDM module and not an analog points coil. Coverage spans OptiMax DFI 75 through 250 HP, EFI four-stroke 30 through 60 HP, 2.5L and 3.0L EFI 150-250, Pro XS and XS applications, and selected MerCruiser SCi and QC4V engines, and three coils make a complete set for a three-cylinder OptiMax. Fitment is gated by ignition generation and engine family rather than horsepower alone: the engine must be OptiMax DFI or EFI, because carbureted models use a different ignition architecture, and the old coil must show a two-pin control plug, one high-tension tower and a black epoxy housing. Always match the stamp on your old coil before purchase. Typical failure symptoms include single-cylinder misfire codes, an alarm that beeps at idle, hard cold starting and power loss above 3500 rpm. Installation: disconnect the negative battery, unplug the two-pin connector, remove the 5 mm bolt on each coil, lift out the old coil, seat the new coil, torque the fastener to the manufacturer specification, reconnect the plug, and apply dielectric grease before fitting the boot; do not swap coils between cylinders on DFI engines. Package includes three coils; boots are not included.
Sold by
Amazon Warehouse
Official Amazon outlet for open-box & returned items
- Backed by Amazon's A-to-Z Guarantee
- 30-day return policy
- Ships from Amazon fulfillment centers
- Price verified on Amazon
Product Details
- SKU:
- awhd-us-b0dws9rgx4
- Model:
- 3-Pack-879984T00
- Country:
- US
- ASIN:
- B0DWS9RGX4
Shopping Smarter
Common questions about buying open-box and refurbished.




















