MTYTOT 12V 1A Power Supply AC Adapter — Open-Box, 22% Off

【Important Compatibility Check】This 12V 1A power adapter outputs DC 12V (1000mA) with a maximum power of 10W. Please confirm your device requires 12V DC, draws 1A or less, and uses a 5.5mm x 2.1mm or 2.5mm plug with center-positive polarity before ordering.

Reliable AC to DC Adapter: Converts 100-240V AC 50/60Hz input to stable DC 12V output. Includes a 4.6FT / 140CM cable for flexible setup. Outside is negative, inside is positive. Please make sure that the DC socket size and polarity of the device are consistent with the adapter, otherwise it may not work or damage the device

Wide Compatibility: This 12V 1A Power Supply works with low-power 12V devices . Works with Modem, IP Camera, TV box/set-top box, external audio system, humidifier, small fan, Wi-Fi Router, and other devices which are powered by DC12V (01Amps) power supply. To ensure good performance and durability, try not to exceed 80% of the total output of the adapter for long time use.

Safety and Certification: This power adapter features built-in over-current, over-voltage, and short-circuit protection to ensure safe operation and protect your devices from electrical damage during use

Important Notice: Before purchasing, please check whether the working voltage of your device is 12V and the current is not greater than 1A. Check whether the DC connector is the same size as the product (5.5mm x 2.1/2.5mm). Verify that the polarity matches with inside positive and outside negative configuration

Parameter 12V 1A Power adapter 1)Input: 100-240 V AC 50/60 Hz 2)Output current:1 A (1000mA) Max 3)Output voltage: DC 12V 4)Output wattage: 12W max 5)Cord Length: about 140cm (about 4.6ft) 6)Female connector size: 5.5mmx2.5mm; (Polarity is inside positive "+", outside negative"-". ) 7)Storage temperature: -20 85℃ 8)Working temperature: -2050℃ Package included 1 x 12V 1A AC/DC adapter Kindly note: (1)Please find the spec label of your device and check the working voltage. It should be12V DC, not be AC 12V or lower/higher than 12V DC. Otherwise, your device will not work or be damaged. (2) Check the max current your device will draw. It should be equal to or less than 1A,such as 550mA,0.65mA,0.8A,1A.Otherwise, your device won’t work well and the power supply will be damaged very soon. (3)Check the power input port of your device. Its outer diameter should be 5.5mm; inner core diameter should be 2.1mm/2.5mm. Center Positive "+", exterior polarity should be" - ". (4)If you have a power supply for reference, their output voltage, plug size, polarity should be the same .If our Adapter’s current is equal to or higher than original one’s, then our adapter will work with your device.