MR CARTOOL F109 Automatic Brake Bleeder Kit, 110V Electric with 9 Adapters — Open-Box, 6% Off

[ONE-PERSON OPERATION – DESIGNED FOR SOLO BRAKE BLEEDING] Say goodbye to the traditional 2-person brake bleeding method. The F109 automatic brake bleeder allows one technician or DIY mechanic to perform brake fluid flushing without needing someone else to pump the pedal. Designed for home garages, repair shops, and routine brake maintenance, it helps save time and simplifies brake servicing. [PULSE TECHNOLOGY – PREVENT AIR BUBBLES & IMPROVE BRAKE PEDAL RESPONSE] Unlike traditional vacuum bleeders that may introduce air into brake lines, the F109 uses advanced pulse flushing technology to continuously replace old brake fluid while preventing air bubble formation during the flushing process. The closed-loop system helps remove trapped air from complex ABS modules and delivers a more responsive brake pedal after maintenance. [SMART MONITORING – HELP AVOID DRY RUN & REWORK] The built-in fluid level sensor automatically stops the pump when fluid runs low, helping reduce the chance of air entering the master cylinder or ABS module. The pump head fits most standard DOT3, DOT4, and DOT5.1 brake fluid containers with openings over 23mm (0.9""), providing easier and more controlled brake fluid service. [9 MASTER CYLINDER ADAPTERS – WIDE COMPATIBILITY] Includes 9 adapters for European, Asian & American vehicles: 43/52mm (For Benz, BMW,Audi, Lexus,Porsche, Ford, Volvo, Volkswagen etc), 33/58mm (For JAC, KIA series), 35/53mm（For Buick business series）, 43/53mm（FOR Ford Focus, Ford edge, Audi, PEUGEOT）, 46/73mm（For Honda Series）, 43/55mm（For Toyota Series）, 34/52mm（For Cadillac, Ford Fiesta, Buick, Mazda）,28/48mm（For Dodge, Chrysler,JEEP series）, 25/40mm（For Nissan Series). [ADJUSTABLE PRESSURE CONTROL – PRECISION BRAKE FLUID FLUSHING] Equipped with a real-time pressure gauge and adjustable pressure range from 0.7–2.5 bar (10–36 PSI), allowing controlled brake fluid replacement for different vehicle systems. With up to 1.6L/min flow rate and 35W power, the F109 supports efficient servicing for passenger vehicles, SUVs, trucks, and ABS-equipped vehicles while reducing fluid spills. The MRCARTOOL F109 brake bleeder kit helps a single technician or DIYer complete a full 4-wheel brake fluid flush in 15-20 minutes. It reduces air bubble risks while saving time and labor. Designed for professional shops and home garages, this unit delivers reliable performance for cars, trucks, and SUVs including Chevrolet Silverado, Toyota RAV4 and Honda CR-V.
Pulse Technology: Prevents Air and Spongy Pedal Feel
Unlike vacuum bleeders that may pull air past bleeder threads, this automotive tool uses positive-pressure pulse signals to push new fluid through the system. The pulsating action flushes out old fluid and sediment while blocking air bubble formation. The result is a firm, responsive brake pedal. Also works for hydraulic clutch bleeding on most vehicles.
Intelligent Level Monitoring with Auto Shut-Off
A built-in sensor stops the pump when new fluid runs low. This helps prevent air from entering the master cylinder or ABS module, protecting expensive components and avoiding a full system re-bleed. Unlike many power brake bleeders that require constant monitoring, the F109 automates this critical step.
Adjustable Pressure for American Trucks and European Sedans
An integrated gauge and rotating dial let you set working pressure from 0.7 to 2.5 bar. Use higher settings for trucks like the Ram 1500 or Silverado, and lower settings for sedans like the BMW 3 Series or Audi A4. This flexibility supports safe operation across most passenger vehicles, including those with ABS brake systems.
Closed-Loop Design and Aluminum Body
The closed-loop system reduces messy spills, protecting painted surfaces and workspace. The aluminum alloy housing resists corrosion and stands up to daily shop use. Detachable hoses and power cord make storage simple. Fits most master cylinder reservoirs with included adapters.
Specifications
Power Supply: AC 110V ±10%
Working Pressure: 0.5 – 2.5 bar
Output Pressure: 0.7 – 2.5 bar
Flow Rate: ≤ 1.6 L/min
Power: 35W
Hose Length:3.5 m (11.5 ft)
Adapters: 43/52, 58/33, 55/43, 53/35, 52/34, 53/43, 48/29, 73/46, 40/25mm
Fluid Compatibility: DOT3, DOT4, DOT5.1
Body Material: Aluminum Alloy
"Product size:260×250×325mm
Product weight: 4.97kg
" Who Uses the F109?
Professional repair shops — speed up bay turnover
Mobile mechanics — one-person operation saves labor
DIY home garage users — tackle brake fluid changes with confidence
Truck and SUV owners — suitable for Chevy, Ram, Toyota and more
Clutch system maintenance — works on hydraulic clutch bleeding
Package Includes
F109 Automatic Brake Bleeder Main Unit
3.5m (11.5 ft) Filling Hose
Detachable Power Cable
1L Waste Oil Bottle
9 Master Cylinder Adapters (43/52, 58/33, 55/43, 53/35, 52/34, 53/43, 48/29, 73/46, 40/25mm)
1 Quick Connector
3 Conversion Connectors (US/EU/Metric)
Spare O-Rings (Multiple)
User Manual