Metal Zip Tie Gun Kit, 150 PCS 304 Stainless Steel Zip Ties, All 11.8 Inch — Open-Box, 8% Off

ALL 150 TIES FULL-LENGTH 11.8" 304 STAINLESS STEEL ZIP TIES: Unlike competing kits that pad the count with mixed short 8" ties, every one of your 150 ties is the full 11.8 inches (300 mm) of 304 stainless steel - one uniform bundle for fencing, exhaust and farm jobs. Kit also includes Stainless steelcable tie gun 1Pcs,Cutting Plier 1pcs，1pcs tie organizer，Industrial Glovespcs，Organizer baglpcs，Organizer bag 1pcs.

200 LBS HEAVY DUTY SELF-LOCKING METAL ZIP TIES: Each stainless steel zip tie is rated at 200 lbs tensile strength with a self-locking ball-grasp that never loosens - about 4x the holding power of a standard 50-lb nylon tie. 304 steel shrugs off UV sunlight, rain, salt spray and exhaust heat where nylon ties turn brittle, crack within a season, or melt near the engine bay. Built for permanent outdoor, marine and automotive use.

METAL ZIP TIE TOOL - TENSION & FLUSH CUT IN 3 STEPS: Insert the tie, squeeze the ergonomic non-slip handle until you reach the desired tension, then press the lever for a clean flush cut. No dangerous sharp burrs left near animals or bare hands, no hand strain from pulling ties tight by hand - one tool finishes long fence runs in a fraction of the time.

COMPLETE JOBSITE KIT WITH TIE ORGANIZER, CUTTING PLIER & GLOVES: The tie organizer clips to your belt and releases one tie at a time at the press of a button, so the remaining ties stay contained on the jobsite. The cutting plier handles fence wire, cable and mesh, while the anti-slip gloves keep a firm grip on cold, wet or oily steel - no separate purchases needed, everything works together in one kit.

FOR CHAIN LINK FENCE, CHICKEN COOP, EXHAUST WRAP & CABLE MANAGEMENT: Secure chain link fabric to posts, re-tension wire fence rolls, fasten coop and kennel mesh, lock exhaust wrap and heat shields in place, bundle cables and irrigation pipes. Everything packs into the included organizer bag - grab-and-go for farms, job sites, marine docks and home workshops.

STOP FIGHTING NYLON ZIP TIES THAT SNAP, CRACK AND GO BRITTLE IN THE SUN. This metal zip tie gun kit is built for the jobs nylon ties cannot survive. You get 150 pieces of 11.8-inch 304 stainless steel zip ties - every tie full length, no mixed short sizes - plus the complete tool set to install them: Stainless steelcable tie gun 1Pcs,Cutting Plier 1pcs，1pcs tie organizer，Industrial Glovespcs，Organizer baglpcs，Organizer bag 1pcs. WHY 304 STAINLESS STEEL: Each self-locking tie is rated at 200 lbs tensile strength - about 4x a standard nylon tie - and holds it through UV sunlight, rain, salt spray and exhaust heat. Nylon ties crack within a season outdoors and soften near the engine bay; 304 steel stays tight for years on fences, coops, docks and exhaust systems. ONE TOOL, THREE STEPS: Insert the tie. Squeeze the ergonomic handle to set your tension. Press the lever for a flush cut with no sharp burrs. Long fence runs that used to take an afternoon of hand-tightening are done in minutes. BUILT FOR REAL WORK: Chain link and wire fence repair, chicken coops and kennels, exhaust wrap and heat shields, irrigation pipes, marine docks, roofing and garage cable management. The tie organizer keeps your remaining ties on your hip - press the button, pull one out, keep working. 150 ties. 5 tools. One kit. Get the job done once, and it stays done.