LUSHIH RV Slide Out Support Trailer Stabilizer Jacks, RV Camper Accessories for Travel Trailers - 21.4" to 40" - 5000 Lbs Each - Pack of 2

SPECIFICATIONS: Travel Range: 21.4 to 40 in, Working Range: 19 in, Max Lift Capacity: 5,000lb(2,267kg) each.

Heavy Duty Steel and each camper slide out stabilizer is finished with a zinc powder-coating for longevity and resistance to rust and corrosion.

STABILTY: The slide-out adjustable stabilizer jacks use triangular threaded screw and M18 nut are matched to ensure that the stabilizer jacks can provide sufficient support. 5.94''x 2.95''x 0.9'' U-shaped tops fit most slide-out frames, It is suggested to put a wood 2x4 along the tops of these jacks so as not to damage your traile.

INCLUDES: 2 Quick lift RV stabilizer jacks. Make sure there is enough clearance around the jack and the load during lifting or lowering actions.

NOTICE: Do not use the RV slide out stabilizer jacks to level a trailer or lift the trailer off its wheels. The jacks are not designed to support the weight of a trailer. The trailer stabilizer jacks are designed to prevent the parked trailer from rocking back and forth when occupants or the active kids move around inside.

USING THE RV Slide Out Support Jacks: 1. Park the trailer on a level surface capable of sustaining the load. Chock all wheels to prevent the trailer from rolling. 2. Disconnect your towing vehicle and move it away. 3. Level the trailer. Place RV Slide Out Support Jacks under the trailer to support it while installing the stabilization jacks. 4. The RV Slide Out Support Jacks must be connected to a solid part of the frame such as a rail. The connection point must also be large enough for the bracket. 5. Check that the jacks bracket is in the correct location. 6. From the lowest setting and then lift to the proper height, use the folding handle to raise the bracket slowly to meet the RV slide out supports bars. It is suggested to Place one or more leveling blocks on the ground beneath the stabilizer jack.