Licence Plate Frame Holder Kit with License Plate Cover & Installation Part — Open-Box, 16% Off

Secure Plate Hold: This license plate mount keeps the tag firmly in place, stopping it from rubbing against the vehicle's body and reducing scratches caused by road vibration. The snug hold also helps quiet rattling noise, keeping the plate steady and the area around it clean and free of scuff marks over time Clear Protective Cover: This license plate cover features a transparent design that keeps the plate fully readable while shielding it from rain, road spray, and sun fading. The clear layer also acts as a barrier against sticker tampering, helping protect your registration tags from being peeled off or damaged by weather Mixed Material Build: This license plate frame combines a stainless steel frame with an ABS mounting bracket and a PC protective shield. The steel provides rigid support for the plate, the ABS base resists cracking under vibration, and the PC cover stays clear without yellowing over extended outdoor exposure Step-by-Step Install: Align the bracket with your grille or bumper and secure it using the included screws or zip ties. Insert your plate into the frame, line up the mounting holes of the bracket, frame, and cover. (Optional: Anti-vibration pads) Then thread the washers, base, and short screws through and tighten with the supplied hex key Complete Hardware Kit: This license plate protector set includes 1*license plate frame, 1*license plate bracket, 1*license plate cover, 10*screws, 4*zip ties, and all other necessary mounting hardware. Everything is packed together, so you can complete the full installation without running to the store for extra part

Steel Strong, Crystal Clear — The All‑In‑One Plate Kit That Mounts Clean And Keeps Your Tag Protected

Product Attributes

Colors: Black, Transparent

Sizes: 

Licence Plate Frame: 12.08*6.11*0.21 inch

Licence Plate Mount: 11.92*5.94*0.41 inch

Licence Plate Cover: 12.08*6.27*0.11

Weight: 13.39 oz

Material: ABS, Metal, PC

Packaging: 1*License Plate Mount, 1*License Plate Cover, 1*License Plate Frame, 4*Zip Ties, 10*Screws, 6*Washers, 8*Anti‑Vibration Pads, 8*Screw Pads, 8*Screw Caps, 4*Expansion Nuts, 1*Wrench

Package Sizes: 12.59*10.38*1.04 inch

Installation Instructions

1. Align the bracket with your grille or bumper, matching the mounting holes to the desired position

2. Secure the bracket using the included screws or zip ties, depending on your vehicle's setup

3. Insert your license plate into the stainless steel frame

4. Line up the mounting holes of the bracket, the frame, and the clear protective cover

5. Optionally place the anti-vibration pads between the plate and the bracket for added cushioning

6. Thread the washers, base, and short screws through the aligned holes

7. Tighten all screws with the supplied hex key until the assembly is firmly seated and rattle‑free

Product Functions & Features

1. Stainless steel frame and ABS bracket lock the plate firmly in place, cutting down the vibration rattle and avoiding the tag from rubbing against the body so the paint stays scratch-free over time

2. Clear PC shield sits over the plate as the outermost layer, keeping rain, road spray, and sun fading from damaging the tag while still leaving every digit and sticker fully legible from any angle

3. Mounts through factory holes or with zip ties — no drilling needed. The kit packs the frame, bracket, shield, screws, ties, and all mounting hardware in one box so you can complete the whole install in one go