Leemone HE400 HE401 HE402 HE405 Filter for Shark Air Purifier 4-Fan, 1-Pack — Open-Box

COMPATIBLE MODELS: Designed exclusively for Shark Air Purifier 4-Fan Models (HE400, HE401, HE401C, HE401NP, HE402, HE402C, HE405, UA415). Compare part numbers HE4FKBAS, HE4FKPET, HE4FKPETMB, HE4FKPRO POWERFUL 3-STAGE FILTRATION: Premium H13 Ture HEPA filter, activated carbon filter and pre-filter combine to effectively filter 99.97% of airborne particles as small as 0.3 microns, such as pollen, dust, pet dander and unpleasant household odors. The carbon particles in our product are made from FSC-certified charcoal powder COST-EFFECTIVE: Package includes 1 HEPA filter and 2 replaceable pre-filters. The pre-filter helps to extend the life of the H13 HEPA filter making it more affordable for you to purchase and replace TIPS: When the filter needs to be replaced, the FILTER LIFE button on the top panel of the air purifier will flash.After installing a new filter, press and hold the FILTER LIFE button for 3 seconds to reset the filter timing system. The machine will beep when the filter timing has been properly reset REPLACE REGULARLY: To keep your air purifier at peak performance, we recommend replacing the pre-filter every 3 months and the HEPA filter every 6-12 months, depending on the air quality in your area and the use of the air purifier

Steps for Replacing Filter for Shark 4 Fan Air Purifier:

1. Turn off the unit and unplug it before removing or installing filters.

2. Remove the back cover from the unit by pressing the tabs at the top, then pulling the cover toward you.

3. To remove the old filter from the unit, pull it out by the tab near the top. Place the old filter in a trash bag and dispose of it.

4. Remove all packaging and wrapping from the new filter.

5.Attach the replaceable pre-filter to the side of the filter with Velcro.

6. Insert the new filter, then replace the filter cover. Press the top of the filter cover, then the sides, until it clicks into place.

7. Plug the unit back into the outlet and turn it back on to begin calibration.

8. After installing a new filter, press and hold the FILTER LIFE button on the top control panel for 3 seconds to reset the filter timing system. The unit will beep when filter timing is properly reset.

NOTE:

This is not a Shark OEM product. The brand names and logos are the registered trademarks of their respective owners.

Any use of the brand name or model designation for this product is made solely for purposes of demonstrating compatibility