LANXEE Motion Sensor Stair Lights, COB Kit, 12 Steps, 3000K, STEP-09 — Open-Box, 37% Off
Brand: LANXEE
Description
Indoor staircase lighting: This kit includes 12 warm white 3000K COB strips for a home staircase. Use the indoor LED step lights to illuminate each stair tread; check the selected step count and color temperature, then measure stair width before ordering.
Cuttable COB LED strips: Each 1m (39.4in) strip is 8mm wide with 480 LEDs/m. Adhesive backing supports placement along a stair tread. Trim only at marked 50mm cut points to suit the measured width, and disconnect power before cutting or changing connections.
Single main-line connection: Connect the strips to one cable routed along the side of the staircase. Main-line connector spacing is 40cm (15.75in); measure the actual cable route between steps and check turn or gap requirements before purchase. Follow the cable direction arrows.
Dimmable motion-triggered lighting: Two PIR sensors activate sequential or multi-step effects. Use the handheld remote to set brightness, speed and on-time. The adjustable daylight sensor can inhibit activation in sufficient ambient light and can be switched off for daytime testing.
Wired indoor installation: Mount on clean, dry, flat surfaces and complete all connections with power off. The controller and LED strips use DC 24V; connect them to the matching power supply, never directly to AC mains. Plan cable routing and a dry indoor mounting location before fitting.
The LANXEE STEP-09 motion sensor stair lights kit adds 3000K warm white staircase lighting to a dry indoor home staircase. This 12-step version includes 12 COB LED strips, each 1m (39.4in) long and 8mm wide, plus a controller, two PIR sensors, a daylight sensor, a main-line cable and a matching power supply. The cuttable strips have 480 LEDs/m and adhesive backing for stair tread lighting. STEP-09 connects the strips to a single side-mounted main line. Connection points are 40cm (15.75in) apart, so measure the actual cable route between steps as well as each tread's width before ordering. The standard cable does not fit gaps over 40cm. Check any turn, gap or extension requirements before selecting this wired kit. Motion triggers sequential or multi-step effects. Set brightness, animation speed and light-on duration with the handheld remote. The daylight sensor can inhibit activation when ambient light is sufficient, and its setting can be adjusted or disabled. Check that setting if a daytime test does not trigger the lights. Follow the main-line direction arrows and finish all wiring before applying power. Mount the indoor LED step lights on clean, dry, flat surfaces and cut only at marked 50mm points. The controller and strips use DC 24V. Use the matching power supply and never connect the controller or strips directly to AC mains.
Sold by
Amazon Warehouse
Official Amazon outlet for open-box & returned items
- Backed by Amazon's A-to-Z Guarantee
- 30-day return policy
- Ships from Amazon fulfillment centers
- Price verified on Amazon
Product Details
- SKU:
- awhd-us-b0f8bs3xc2
- Model:
- LX-09-12S-WW-CB-200W
- Country:
- US
- ASIN:
- B0F8BS3XC2
Shopping Smarter
Common questions about buying open-box and refurbished.


















