JYJZPB DCB112 Battery Charger Compatible for 20V Max, 20V and 60V Battery — Open-Box, 10% Off

【Perfectly Compatible】The DCB112 Charger efficiently charges batteries for Dewalt 12V-20V and 60V MAX Lithium ion battery, such as for DCB200, DCB201, DCB203, DCB204, DCB206, DCB207, DCB208, DCB230, DCB240, DCB140, DCB120, DCB127, DCB606, DCB609, DCB612 etc

【Fast Charging Capability】Replacement for 20V Charger DCB112, DCB115, DCB118, DCB107, DCB119, DCB102, DCB101, DCB105, DCB100

【Charging Time】Input voltage: 100-240V AC / Output: 12V-20V, max 22V; It can fully charge a 1.5Ah battery in 1 hour and a 5.0Ah battery in 2 hours.

【Smart LED Indicators】Quickly check the battery charge status with the LED indicator. Flashing red light = Charging in progress. flashing red = charging, solid red = fully charged, red+yellow flash = fault detection. The DCB112 charger features a wall-mountable design

【Intelligent Protection System】This rapid charger complies with FCC and CE security testing standards. Effectively prevents overcharging, overheating, overcurrent, overvoltage, over-discharge, and short circuits

【Note】Please ensure compatibility with your battery model. After fully charging, unplug the power source before removing the battery

Description: The charger is designed for 12V to 20V batteries. It supports 100V-240V AC input, the maximum output voltage is 20V, and the output current is 3A. The charger can be suitable for Dewalt 20V series batteries to help the batteries charge quickly. At the same time, the charger has multiple safety protections, which can effectively prevent the battery from being damaged due to over-current, overcharge, short circuit and other conditions. The LED indicator of the charger can directly display the charging status of the battery, so that you can judge whether the battery is fully charged by the status of the indicator light without paying much attention to the status of the battery. LED Indicator Description: Flashing red light: the battery is charging. Steady red light: the battery is fully charged. Red light and yellow light flashing: battery failure. *When the charger is plugged in and the battery is not connected, the indicator light does not light up. *The program has battery charging memory. When using a bad battery for the first time, the charger will alarm, and use a normal battery for the second time, and the charger will perform charging unconditionally. Basic Parameters: Length: 5.9 inches (15.0cm) Width: 2.7 inches (7.0cm) Height: 4.5 inches (11.5cm) Weight: 0.86 pound (0.39kg) Charging cable: 3.6 feet (1.1m) Input voltage: 100V-240V (AC) Input current: 0.8A (max) Output voltage: 22V (max) Output current: 3A (max) Note: 1. Please remove the battery from the charger in time after charging, otherwise it will damage the battery; 2. The continuous working time of the charger should not exceed six hours; 3. After using the charger, please unplug it in time and disconnect the power supply; 4. Do not install unsuitable batteries on the charger for charging; What’s in the box: 1*DCB112 Charger 1*User manual