Juicing Screen Compatible with Select Omega 8003, 8004, 8005 and 8006 — Open-Box, 25% Off

【CHECK THE FULL MODEL NUMBER】 Do not order by “8006” alone. Check the full model label on the bottom or back of your juicer. J8006HDS and J8006HDC are not compatible; similar model numbers may use different juicing screens.

【MOLDED “2” MARK REQUIRED】 Designed for select Omega 8003, 8004, 8005 and 8006 juicers using a drum with a molded numeral “2” on the back. The model number alone does not confirm fit. Do not order for drums without this mark.

【VERIFY MODEL, SHAPE AND SIZE】 Not compatible with J8006HDS, J8006HDC, 8007, 8008, NC800 or NC900. Compare the original screen’s upper rim, side ribs, lower mesh, base shape, connection points and dimensions with the product images. Do not order if any critical detail differs.

【COMPLETE AFTERMARKET SCREEN】 Includes one complete juicing screen. Its integrated design does not require a separate or transferred silicone gasket. Structural differences from some original screens do not indicate a missing part. Not manufactured or endorsed by Omega.

【INSTALL WITHOUT FORCING】 Match the orientation of your original screen. If the screen does not align, does not seat fully or prevents the juicer from closing normally, stop installation and recheck the full model, molded “2” mark, shape and dimensions. Rinse the stainless steel mesh promptly after use.

IMPORTANT COMPATIBILITY AND STRUCTURAL DESIGN NOTICE Similar-looking Omega juicers may use different juicing screens. Do not order based only on the number “8006.” Before purchasing, verify the full model number, the molded “2” mark on the drum, and the original screen’s rim, ribs, mesh, base, connection points and dimensions. This product is a third-party aftermarket replacement. Some original screens use an embedded silicone ring, while this replacement uses a different complete integrated structure and does not require a separate or transferred gasket. This structural difference does not indicate a missing component.