IC60 Salt Cell Replacement for Pentair IntelliChlor, EC-521105 Chlorine Generator Cell for In-Ground Pools Up to 60,000 Gallons,Easy Installation — Open-Box, 5% Off

【✔Built for Long-Term Pool Use】 – Constructed for reliable performance in saltwater pool environments, suitable for continuous operation during the swimming season. 【✔ Exact Replacement for IC60】 –Designed specifically as a replacement for Pentair IntelliChlor IC60 salt chlorine generator systems; replaces OEM part number 521105. Not compatible with IC20 / IC40 models. 【✔ For Pools up to 60,000 Gallons】 – Ideal for in-ground saltwater swimming pools up to 60,000 gallons, providing stable and efficient chlorine generation for residential pool systems. 【✔ Efficient Chlorine Generation】 – Converts dissolved salt into chlorine to keep pool water clean, clear, and sanitized without the need for traditional chlorine tablets. 【✔Long-Lasting and Durable Electrode Design】 – Built with corrosion-resistant materials to support stable performance and extended service life with proper pool chemistry balance. 【✔ Direct Plug-and-Play Installation】 – Matches factory connections for quick replacement; no special tools required. A practical solution for restoring your saltwater chlorine generator system. 【✔ 6-Month Warranty & Support】 – Comes with a 6-Month limited warranty. If you experience any quality or compatibility issues, our support team is ready to help with replacement or solutions. ⚠️

QUESTION&ANSWER

📌Q1: Is this salt cell compatible with Pentair IntelliChlor IC60 systems?

A:

Yes. This salt cell is designed specifically as a replacement for Pentair IntelliChlor IC60 systems and replaces part number 521105. It is not compatible with IC20, IC40, or other IntelliChlor models.

📌Q2: Will this work with IC40 or IC20 salt chlorine generators?

A:

No. This replacement salt cell only fits IC60 systems. IC20 and IC40 models use different cell sizes and are not compatible.

📌Q3: Is this an original Pentair salt cell?

A:

No. This is an aftermarket replacement salt cell designed to be compatible with Pentair IntelliChlor IC60 systems. It is not manufactured or branded by Pentair.

📌Q4: What pool size is this IC60 salt cell designed for?

A:

This salt cell is suitable for in-ground saltwater pools up to 60,000 gallons, when used with a compatible IntelliChlor IC60 control unit.

📌Q5: Does this salt cell include the power center or control unit?

A:

The control board and flow switch are included together with the salt cell. The power center is not included and needs to be purchased separately.

📌Q6: Does this salt cell include the power center or control unit?

A:

No. This salt cell is designed only for in-ground pool systems and is not intended for above-ground pools or spas.

IC60 Salt Cell Replacement for Pentair IntelliChlor

🔧

Installation Instructions

✅

Before Installation:

1. Turn off the pool pump and disconnect power to the salt chlorine generator system.

2. Allow water pressure in the plumbing system to fully release.

3. Confirm the replacement salt cell matches IC60 model only.

4. Inspect O-rings and union connections to ensure they are clean and undamaged.

✅

Installation Steps:

Step 1-- Power Off System：Shut off all electrical power to the pool pump and IntelliChlor control unit before installation.

Step 2-- Remove Old Salt Cell：Loosen the union fittings on both ends of the existing salt cell and carefully remove it from the plumbing line.

Step 3-- Check & Lubricate O-Rings：Inspect the O-rings on the unions. Apply a small amount of silicone-based lubricant (non-petroleum) if needed to ensure a proper seal.

Step 4-- Install New Salt Cell：Position the new IC60 replacement salt cell in the same orientation as the original unit. Make sure the flow direction arrow aligns with the water flow direction.

Step 5-- Secure Connections：Hand-tighten the union fittings evenly on both ends. Do not overtighten.

Step 6-- Restore Power & Water Flow：Turn the pool pump back on and restore power to the IntelliChlor system. Allow water to circulate and check for leaks.

Step 7-- System Check：Verify that the system recognizes the new salt cell and operates normally by observing system indicators.

✅

After Installation Tips:

① Allow the system to run and confirm normal operation.

② Follow manufacturer recommendations for system settings and routine pool maintenance.

③ Periodically inspect the salt cell for scale buildup and clean according to standard pool care practices.