HUEPAR Laser Level with 2 Plumb Dots - 2 Plumb Points and 2 Cross Line — Open-Box, 17% Off

[Combines Cross Line With Plumb And Up Points ]- Huepar M-9211G self-Leveling laser level offers 2 plumb dot plus a cross-line for a 2-in-1 laser. This hybrid point and line laser tool combines all the features of the Huepar line laser plus point-to-point plumb, giving contractors in the commercial and remodeling trades maximum versatility. Class 2 (IEC/EN60825-1/2014)output power <1mW [Fine Positioning]- The 9211G laser leveler offers cross-line accuracy of +/- 1/9 inch at 33 feet, up point accuracy of 1/13 inch at 33 feet and down point accuracy of 1/9 inch at 33 feet. Class II 510-530nm laser product. We adopt the bright green laser unit, It is at least twice brighter than red lasers utilizing the same power source. All beam turn on and working time up to 6 hours [Intuitive Operation & Extra Long Laser Lines]- Just gently press the power button to activate this device, easily project a cross line laser with plumb bob. Laser line working Distance is 82Ft and Laser Points is 197Ft. Highly-visible laser lines with wide 110º horizontal, 180º vertical fan angles - easily-seen, long lines minimize the need to reposition the unit [Self-Leveling and Manual]- The 9211G Plumb dot level tool features the Smart Pendulum System, you are able to self-level on an inclined surface within 4°. If the surface inclines over 4 °, the laser will flash to indicate you are out-of-leveling parameters. You can be confident that you are within optimal leveling range. Secure transport lock protects pendulum when unit is switched off. Manual mode locks lines for use at any angle [Durable & Warranty]- This laser level is covered by TPR soft rubber for shock resistant, IP54 waterproof and dustproof, shockproof, wear resistant, impact resistance, cold and high temperature. Customer can enjoy 12 months limited warranty but up to 24 months longer warranty if you become a royal customer through the product registration (Offered on the package box) >Versatile Modes with fine adjustable positioning
Self-leveling mode to project cross-line if within 4 degrees on either side of true zero, and flash continuously until the level itself is leveled so you know when true reads true.
Just lock the pendulum to start manual mode, permits projecting lines or points in any position or angle until five (5) second flash pattern stops.
>Automatic locking function
Don't forget to lock your laser level, it cannot be powered down when the pendulum is unlocked, Pendulum locks for safe transport, storage or when not in use.
>More adaptable, effective, and convenient tool
Professional 2-points self-leveling cross-line laser level, can be used as a pendulum, not affected by the wind, and is more efficient than the traditional Plumb Bob. Can also be widely used in construction, HVAC, electrical engineering, steel bolt frames, etc.

Huepar M-9211G Specifications:
Laser Class: Class 2 (IEC/EN60825-1/2014), output power <1mW
Laser Wavelength: 510~530 nm
Leveling Accuracy: +/- 1/9 Inch at 32 Feet
Leveling/Compensation Range: 4°
Up Plumb Accuracy: 1/13 Inch at 33 Feet
Down Plumb Accuracy: 1/9 Inch at 32 Feet
Working Distance (Dot/Line): 60m/ 25m (100 LUX)
Operating Time: 6 hours with all laser beams on Power Source: 2×˝AA˝ (LR6)
IP Rating: IP54
Operation Temperature Range: -10℃–＋50℃
Storage Temperature Range: -20℃–＋70℃
Package Content:
1 X Huepar 9211G laser level
1 X 360 Degree Rotating Base
1 X Easy-to-Adjust magnetic base
2 X AA Batteries
1 X Pouch
1X English User's Manual

Laser Classification:
The instrument is a laser class 2 laser product according to IEC/EN60825-1/2014. It is allowed to use unit without further safety precautions. Eye protection is normally secured by aversion responses and the blink refl ex.
The laser instrument is marked with class 2 warning labels.