Hot-Dip Galvanized Adjustable Angle Bracket, 1-5/8" Strut Channel, 4-Pack — Open-Box, 5% Off
Brand: Axomize
Description
ADJUSTS 0-90 DEG, ONE BOLT LOCKS IT - The pivot takes a 1/2 in bolt. Set the angle, tighten, and it stays. No extra parts. Roof pitch, knee braces and solar rail tilt all work off the same fitting.
HOT-DIP GALVANIZED, NOT ELECTROPLATED - The whole part goes into molten zinc, so the coating reaches into the hole walls and the sheared edges. Built for outdoor, coastal and washdown exposure where bright electroplated parts give out first.
SLIPS OVER 1-5/8 IN STRUT - Upright channel measures 1-11/16 in (42.6 mm) inside, a 1.33 mm slip fit over standard 1-5/8 in strut. Base 149 x 66.9 mm, 152 mm tall, 5.1 mm plate. 2.66 lb (1208 g) per piece.
14 MM HOLES, 1/2 IN BOLTS DROP RIGHT THROUGH - Holes run a full 14 mm, so a 1/2 in (12.7 mm) bolt passes with about 1.3 mm to spare. No reaming, no hammering. Bolts and channel nuts sold separately.
FOUR PER PACK - A solar rack or shelving corner usually needs four points. One order covers the job.
Adjustable angle bracket for 1-5/8" strut channel framing, hot-dip galvanized and sold four to a pack. SET THE ANGLE, ONE BOLT HOLDS IT The upright pivots through 0-90 degrees on a 1/2 in bolt. Swing it to the angle you need, tighten the nut, and it stays there. No detents to line up, no extra hardware to buy. Roof pitch, knee bracing and solar rail tilt all come off the same fitting. HOT-DIP GALVANIZED, NOT ELECTROPLATED The finished part is dipped in molten zinc rather than plated in a bath. The coating follows the steel into the hole walls and across the sheared edges, which are exactly the places a thin bright plating leaves thin. The surface is matte gray with the crystalline pattern you can see in the photos. Built for rooftops, coastal air and washdown areas. MEASURED, NOT NOMINAL Every figure below came off a caliper on the finished galvanized part. Base plate 149 x 66.9 mm, 5.1 mm thick, with a 25 x 14 mm slot for alignment. Upright channel 42.6 mm inside, a 1.33 mm slip fit over standard 1-5/8 in strut. Overall height 152 mm with the upright at 90 degrees. Holes a full 14 mm, so a 1/2 in bolt drops straight through with about 1.3 mm to spare. No reaming, no hammering. Twin triangular gussets brace both sides of the pivot. 2.66 lb (1208 g) per piece. WHAT IS IN THE BOX Four brackets, each with its pivot bolt and nut fitted. Mounting bolts and channel nuts are sold separately, so you can match whatever hardware your run already uses. BEFORE YOU FASTEN These are framing and support fittings, not rated structural connectors. On engineered or code-governed work, confirm loads and fixings with your project engineer.
Sold by
Amazon Warehouse
Official Amazon outlet for open-box & returned items
- Backed by Amazon's A-to-Z Guarantee
- 30-day return policy
- Ships from Amazon fulfillment centers
- Price verified on Amazon
Product Details
- SKU:
- awhd-us-b0hh65jb7j
- Model:
- wxdz
- Country:
- US
- ASIN:
- B0HH65JB7J
- UPC:
- 785396661256
Shopping Smarter
Common questions about buying open-box and refurbished.

















