Add to favorites
GXARTS Rear Right Suspension Trailing Control Arm 4871042010 Compatible With Toyota RAV4 2001-2005 2WD FWD 4WD AWD — Open-Box, 12% Off
Brand: GXARTS
Condition: Used
$12302
$13929
-12% Save $1627
Updated: 5 days ago
Description
Fitment:Compatible with Toyota RAV4 2001-2005, This rear right (passenger side) suspension trailing control arm fits compatible with Toyota RAV4 2001 2002 2003 2004 2005, 2.0L and 2.4L engines, 2WD FWD 4WD AWD. This is a complete trailing control arm sub-assembly with pre-installed rubber bushings — ready to bolt on. Replaces: 48710-42010, 4871042010, 48710 42010. Position: Rear Right (RH / Passenger Side). Please verify your vehicle year, model, and the side you need (left vs. right) before purchasing.
Manufacturer Part Number:48710-42010, 4871042010, 48710 42010 【What is Included + Specifications】Package includes: 1x Rear Right Trailing Control Arm with pre-installed bushings. Type: Rear Trailing Control Arm Sub-Assembly. Position: Rear Right (Passenger Side). Material: Steel arm body with rubber bushings. Bushings are formulated for the correct durometer (hardness) to match stock ride quality. Mounting: Direct bolt-on using stock mounting locations. No pressing or special tools needed.
【When You Need This Part — Signs Your Trailing Arm Needs Replacement】The rear trailing arm controls rear wheel alignment and absorbs road forces during acceleration, braking, and cornering. Over time the rubber bushings deteriorate, causing: (1) Rear-end clunking or knocking sounds over bumps, (2) Uneven rear tire wear — inner or outer edge, (3) Vehicle pulling to one side under braking, (4) Rear-end wandering or instability at highway speed, (5) Failed state inspection due to visible bushing cracks or tears. A worn trailing arm should be addressed promptly — it directly affects rear wheel toe and camber angles.
【Installation】Steps: (1) Park on a flat surface and engage the parking brake. (2) Raise the rear of the vehicle and support it securely on jack stands. (3) Take off the rear right wheel. (4) Place a jack under the rear knuckle to support it — the knuckle will drop when the trailing arm is disconnected. (5) Spray the trailing arm mounting bolts with penetrating oil and let soak 10-15 minutes. (6) Using a 14mm/17mm/19mm socket and breaker bar, unbolt the trailing arm mounting bolts (front and rear). (7) Slide the old trailing arm out. (8) Slide the replacement trailing arm into position and hand-tighten all bolts. (9) Reinstall the wheel and lower the vehicle. (10) With vehicle weight on the w
【Tips】 A rear wheel alignment is mandatory after trailing arm replacement to set the correct rear toe and camber angles. Consider replacing both sides at the same time if the vehicle has high mileage.
Compatible Vehicles:
- Compatible with Toyota RAV4 Base 2.0L 1998CC L4 GAS DOHC 2WD / 4WD 2001-2003
- Compatible with Toyota RAV4 Base / L 2.4L 2362CC L4 GAS DOHC 2WD / 4WD 2004
- Compatible with Toyota RAV4 Base / L / Sport 2.4L 2362CC L4 GAS DOHC 2WD / 4WD 2005
Cross-Reference Part Numbers:
48710-42010
4871042010
48710 42010
When You Need This Part:
- Rear-end clunking or knocking sounds over bumps
- Uneven rear tire wear — inner or outer edge wearing faster
- Vehicle pulling to one side under braking
- Rear-end wandering or instability at highway speed
- Failed state inspection due to visible bushing cracks or tears
- Rear wheel alignment cannot be set to specification — the arm or bushings are worn beyond adjustment
Product Specifications:
- Type: Rear Trailing Control Arm Sub-Assembly
- Position: Rear Right (RH / Passenger Side)
- Fit Type: Vehicle Specific Fit
Installation Steps:
- Park on a flat surface and engage the parking brake
- Raise the rear of the vehicle and support it securely on jack stands
- Take off the rear right wheel
- Place a jack under the rear knuckle to support it — the knuckle will drop when the trailing arm is disconnected
- Spray the trailing arm mounting bolts with penetrating oil and let soak 10-15 minutes
- Using a 14mm/17mm/19mm socket and breaker bar, unbolt the trailing arm mounting bolts (front and rear)
- Slide the old trailing arm out of the mounting brackets
- Slide the replacement trailing arm into position
- Hand-tighten all mounting bolts
- Reinstall the rear right wheel
- Lower the vehicle so the full weight is on the wheels
- With the vehicle weight on the wheels, torque all mounting bolts to specification using a torque wrench
- Get a rear wheel alignment — this is mandatory after trailing arm work to set the correct rear toe and camber angles
Tips:
- Always torque the trailing arm bolts with the vehicle weight on the wheels — this loads the bushings in their natural position
- If one side is worn, consider replacing both sides at the same time
- Inspect the rear knuckle and wheel bearing while the arm is off
- Use penetrating oil generously on the mounting bolts — they are often seized from corrosion
Package Includes:
1x Rear Right Suspension Trailing Control Arm with Pre-Installed Bushings
Sold by
Amazon Warehouse
Official Amazon outlet for open-box & returned items
- Backed by Amazon's A-to-Z Guarantee
- 30-day return policy
- Ships from Amazon fulfillment centers
- Price verified on Amazon
Product Details
- SKU:
- awhd-us-b0dp9v3v16
- Model:
- 48710-42010
- Country:
- US
- ASIN:
- B0DP9V3V16
Shopping Smarter
Common questions about buying open-box and refurbished.
Why buy refurbished or open-box?
Refurbished and open-box products offer the same performance as new at a fraction of the price. You're already saving $16 on this listing. They've been inspected, tested, and are ready to use — the only difference is the price tag. Buying refurbished also reduces electronic waste, extending product life cycles and keeping functional devices out of landfills.
What's the difference between open-box and refurbished?
Open-box products are customer returns that have been inspected and confirmed functional. They may show little to no use — often the item was returned simply because the buyer changed their mind. Refurbished products have been professionally repaired or restored by technicians, tested to meet or exceed manufacturer specifications, and sometimes come with a warranty. Both are a smart alternative to buying new.
Why use OpenBoxFox?
Finding refurbished deals is time-consuming — you'd have to check Amazon Warehouse, Reebelo, Dyson Outlet, and others separately for GXARTS products. OpenBoxFox aggregates these listings in one place, so you can compare and find the best deal without the legwork. We update pricing daily so you always see current availability and real savings.
Is it safe to buy refurbished?
Yes. Products listed on OpenBoxFox come from established retailers like Amazon, Reebelo, and Dyson — not unknown third-party sellers. Each retailer has buyer protection policies, return windows, and in some cases warranties. You get the price advantage of used goods with the purchase security of a known retailer.
More open-box deals
Updated daily from Amazon, Reebelo, and Dyson.
Add to favorites

Add to favorites

Add to favorites

Add to favorites
No image
Add to favorites
No image
Add to favorites
No image
Add to favorites

Add to favorites
No image
Add to favorites
No image
Add to favorites
No image
Add to favorites
No image
Add to favorites









