Gooed Riddance: Safe & Non-Toxic Adhesive and Pine Sap Remover/Cleaner. Removes Sticker, Label and Tape adhesives, and Pine sap and Tar. Water-Based, Cleans up and rinses Away with Water.

Clean up and remove adhesives and pine sap without the fumes, frustration and oily mess of solvent-based products. Gooed Riddance is safe and nontoxic and works faster than solvent-based adhesive removers. Ventilated area not necessary. Can be used indoors. Safe for children and the chemically-sensitive. SAFE AND NONTOXIC. NO VAPORS. NO SOLVENTS. NO FRAGRANCES. NO ODOR. USE INDOORS--VENTILATION NOT NECESSARY. No toxic chemicals or fumes. Will not damage plastic or painted surfaces if scrubbing is gentle. Works best on glass and metal surfaces. Can also be used on fabric and wood. Gooed Riddance will remove pine sap from fabric! USE WARM. Heat the surface with hot water. Works best when adhesive to be removed is warm. If cleaning a jar, fill the jar with hot water. Gooed Riddance lifts adhesive away from a surface, and leaves the surface perfectly clean. Works especially well on glass and metal surfaces. Gooed Riddance is a soft paste. Add a bit of hot water to the paste, and scrub with a nylon or stainless steel scrubber. Use nylon scrubber on plastic or painted surfaces. Use stainless steel scrubber on glass and metal surfaces. A LITTLE GOES A LONG WAY. Gooed Riddance is concentrated paste. Each jar can remove the adhesive from about 75 3x5" stickers. The 1-star reviews are by people who tried GR on things that cannot be cleaned with Gooed Riddance: dried paint, caulk, silicone, superglue, wood glue, fabric glue, dried/aged duct tape, or epoxy. GOOED RIDDANCE DOES NOT WORK ON DRIED PAINT, CAULK, SILICONE, SUPERGLUE, WOOD GLUE, FABRIC GLUE, DRIED/AGED DUCT TAPE, OR EPOXY. GR IS ONLY FOR CLEANING STICKY STUFF that cannot be cleaned with regular dish soap: ★tape, sticker and label adhesives, ★pine sap, ★tar/asphalt/grease, ★polymerized cooking oil (i.e. the brown sticky layer that accumulates on restaurant walls, and bakeware), ★aged/polymerized motor oil and lubricating oils,

Gooed Riddance Water-Based Cleaner and Adhesive Remover - Non-Toxic No Solvents - Removes Stickers, Tape, Labels, Acrylic, Mastic and Rubber Adhesives - Also removes Pine Sap and Tar... with water!

Gooed Riddance is a water-based pine sap and adhesive remover!

By comparison, other adhesive removers (such as Goo Gone and Uni-Solve) contain solvents and emit flammable, harmful vapors (according to product labels and MSDS sheets). Gooed Riddance is water based, contains no solvents and does not emit harmful or flammable vapors.

Gooed Riddance removes acrylic adhesive, pine sap, tar/asphalt, and rubber adhesive (gaffer tape, duct tape), and similar substances. Gooed Riddance lifts the sticky mess from the surface, and then it is washed away with water.

SAFE AND NONTOXIC:

All the ingredients in Gooed Riddance are essentially harmless and safe for the environment.

FOR BEST RESULTS:

1. For best results, warm the surface. To remove label adhesive from a jar, fill the jar with hot water.
2. A scrubber must be used. We recommend a stainless steel or nylon scrubber. Even if removing pine sap from your hands, use a scrubber. You do not have to scrub a lot. Gooed Riddance will lift warm adhesive with a few seconds of scrubbing.
3. Gooed Riddance comes as a soft paste. Add water until it is a thick liquid, comparable to honey.

NOTES:

- Rubber adhesive takes longer to remove then acrylic adhesive.
- Nylon scrubbers should be used on plastic or painted surfcaces, because stainless steel scrubbers will scratch these soft surfaces. However, nylon scrubbers do not work as well as stainless steelcrubbers.  
- Gooed Riddance is for removing adhesives, not glue. Gooed Riddance does not work on hardened glues like hardened epoxy, caulk, silicones, or cyanoacrylates (super glue). Glues dry or polymerize. Adhesives remain sticky.
- Label/sticker should be peeled off before adhesive removal. Heating the label with a hair dryer or hot water makes label peeling easier.

Patent Pending.

Made in the USA.